• 전기학회논문지
• /
• 제68권1호
• /
• pp.207-214
• /
• 2019

A large-capacity wireless power system is a technology that transmits electric power of kW or more in a noncontact type. Electric cars, electric buses, and electric railways. In order to increase the power transmission efficiency, a resonance method using a frequency of kHz is applied and the efficiency is 80 ~ 90%. In this case, the loss is 10 ~ 20% other than efficiency, and corresponds to several hundreds of W to several kW in kW class wireless power transmission. 35 kW wireless feed system environment, and induced current in the nearby conductive part was measured. As a result of analysis, it was confirmed that induction phenomenon is higher as the loop configuration of the conductive part per area is dense. The increase of the induced current in the mesh loop is characterized by the density of the nearby conductive part having a permeability per unit area. The concentration of the magnetic field by the permeability is increased and the induction phenomenon causing the induction current is increased. It was confirmed that induction phenomenon increases by about 2.7 times when 9 times dense structure is formed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.39-40
• /
• 2011

The purpose of this study is to select a conductive resistor as high energy efficiency through analysis of the heating properties by induction heating. The result of this study, the heating properties is capable of weaken cementitious joint in 10~30 seconds when using the conductive resistor with wire mesh or punching metal. Although the steel is higher temperature than SUS304, SUS304's heating properties are more uniform.

• 한국지구과학회:학술대회논문집
• /
• 한국지구과학회 2004년도 춘계학술발표회 논문집
• /
• pp.52-57
• /
• 2004

Korean Peninsula located between Japan and China where earthquakes frequently occur, have little geophysical observation despite its tectonic importance. This study suggests the inland conductive structures inferred from GDS data measured in Korean Peninsula and try to interpret induction arrows quantitatively with the aid of 2- and 3-D geomagnetic induction modeling. Ogcheon Belt (OCB) and Imjin River Belt (IRB) are regarded as main conductive structures in Korea Peninsula, the induction arrows for the period of 60 minutes show very weak anomaly due to sea effect, which is supported by the results of 3-modeling also. However, for the period of 10 minutes, induction arrows at YIN and ICHN show anomalous patterns considered as the effect of IRB in spite of sea effect. The results of 2-D modeling which simplify geological situations provide overall information on IRB

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.3-4
• /
• 2011

The purpose of this study is to suggest basic data for development optimal disassembly manufacturing system during analysis pore structure and heating properties of cementitious joint using conductive resister by induction heating. From the results, we knew cementitious joint is weak easily by heating of conductive resister, such as wire mesh, punching metal, and steel fiber, from induction heating.

• 지구물리
• /
• 제9권3호
• /
• pp.159-169
• /
• 2006

A GDS (Geomagnetic Depth Sounding) method, one of extremely low-frequency EM methods, has been carried out to examine conductivity anomalies in and around the Korean Peninsula. In this study, new GDS data acquired at the five sites in south-eastern area of the peninsula were incorporated into the previous GDS data. In order to quantitatively interpret observed induction arrows, the 3-D MT modeling considering the surrounding seas of the Korean Peninsula has been performed to evaluate sea effect at each GDS site. The modeling results revealed that the observed real induction arrows were not explained by solely sea effects, consequently two conductive structures that are responsible for the discrepancies between observed and calculated induction arrows were proposed. The first one is the Imjingang Belt, which is thought as an extension of Quiling-Dabie-sulu continental collision belt. The effects of the Imjingang Belt clearly appear at the site YIN and ICHN. The second one is the HCL (Highly Conductive Layer), which is considered as a conductive anomaly by mantle upwelling produced in back-basin region. The effects of the HCL are seen at the site KZU, KMT101, and KMT 107 in the south-eastern region of the Korean Peninsula.

• 지구물리와물리탐사
• /
• 제7권2호
• /
• pp.136-147
• /
• 2004

본 논문에서는 자기지전류 탐사법에 대한 3차원 이상체의 모형 반응 결과를 분석하였다. 분석에 이용된 3차원 모형은 비전도성 배경 매질 내에 전도성 고립이상체가 존재하는 모형과, 같은 모형에 전도성 표토층을 추가한 모형이다. 지하의 전도성 이상체에 의한 겉보기 전기비저항 이상에는 뚜렷한 주파수 의존성이 존재하며, 이는 이상체 주변에 발생되는 전류 집중 및 유도 전류 거동의 주파수 의존성 때문이다. 지표에서 tipper와 induction vector의 반응에도 뚜렷한 주파수 의존성이 존재하였으며, 그 외에도 tipper와 induction vector의 반응은 이상체의 위치와 직접적인 연관성이 존재하였다. 또한, 2차원 탐사를 가정하여 한 측선에서 겉보기 전기비저항과 위상, induction vector를 분석하면, 3차원 이상체의 존재 여부 및 위치 파악에 도움을 줄 것으로 판단되었다. 전도성 표토층을 추가한 모형의 반응은 대체적으로 고립이상체 모형의 반응과 비슷한 양상을 나타내었지만, 전도성 표토층의 영향으로 이상체에 의한 반응의 크기가 감소하였으며, 이상체의 영향이 나타나는 영역도 크게 감소하였다. 위와 같이 본 연구에서 논의된 3차원 모형 반응에 대한 분석 결과 및 그 방법은 지하 구조의 3차원 반응의 이해와 MT 탐사 자료의 해석에 효과적인 지침이 될 것으로 생각된다.

• 자원리싸이클링
• /
• 제12권2호
• /
• pp.45-53
• /
• 2003

2001년 국내에서는 총 491만톤의 석탄회가 발생되어, 이중 약 63.3%가 재활용되고 있으나 이들의 대부분은 콘크리트 혼합물과 시멘트 산업에 사용되고 있다. 그러므로 본 연구에서는 석탄회의 활용도를 높이기 위한 새로운 용도개발을 위한 목적으로 마찰대전법 대신 정전유도법을 사용하였다. 정전유도법을 적용하여 석탄회로부터 1%LOI 이하의 고순도 석탄회와 70%LOI 이상의 고탄소질 석탄회를 얻을 수 있음을 확인하였으며, 본 실험에서 두 전극간의 전위차는 8～16kV 범위로 적용하였다.

• Journal of Magnetics
• /
• 제18권1호
• /
• pp.9-13
• /
• 2013

Shielding effects in conductive and magnetic materials were investigated as a function of properties, thickness and diameter. In this work, evaluations on passive conductive and magnetic shield specimens were achieved through experimentation set-up using 50 Hz single and three phase induction field sources. Analysis on material microstructure properties and characteristics of shielding specimens were performed with the use of vibrating sample magnetometer (VSM) and field emission scanning electron microscopy (FESEM). An induction field at $136{\mu}T$ of single phase system and $50{\mu}T$ of three phase systems were observed to the shield specimens with the thickness ranged of 0.2 mm to 0.4 mm. It is observed that shield specimen efficiency becomes inversely proportionate to the increment of induction fields. The decrease was attributed to the surface structure texture which relates to the crystallization and non-crystallization geometrical effects.

• 한국지구과학회:학술대회논문집
• /
• 한국지구과학회 2005년도 추계학술발표회 논문집
• /
• pp.124-131
• /
• 2005

한반도의 심부 전기구조를 조사하기 위해서 극심부 전자탐사 중 하나인 지자기 수직탐사(GDS; Geomagnetic Depth Sounding)를 수행하였다. 본 연구에서는 한반도 동남부에서 추가적으로 획득된 5개의 GDS 탐사 자료와 기존의 12개 측점의 탐사 자료를 통합하여 해석하였다. 또한 한반도 및 주변 해양의 영향을 정량적으로 평가하기 위하여 3차원 MT 모델링이 수행되었다. 관측된 실수 유도 지시자는 주변 해양의 영향만으로 설명되지 않았으며, 이 차이를 설명할 수 있는 2개의 전도성 구조를 제시하였다. 첫 번째는 Quiling-Dabie-sulu 대륙 충돌대의 연장성이라 생각되는 임진강 벨트이며, YIN과 ICHN에서 그 영향을 명확히 확인할 수 있었다. 두 번째는 한반도 남해안과 큐슈 섬 사이에 존재할 것으로 추정되는 맨틀 용승에 의한 고전도성층(HCL; Highly Conductive Layer)로서, 주로 한반도 동남부에 위치하는 KZU, KMT101, 107에서 그 존재를 확인할 수 있었다.

• 한국정밀공학회지
• /
• 제29권8호
• /
• pp.873-878
• /
• 2012

Putting a conductive rod between rotating axial electrodynamic wheels composed of repetitive permanent magnets, three-axial magnetic forces generate on the conductive rod. It is possible to levitate and transfer the rod on space with the forces. However, the forces vary in direction and magnitude for a position of the rod between the electrodynamic wheels. Thus, the position influences the stability of the rod also. To guarantee the stability of a levitated object, the force acting on the object should have negative stiffness like a spring. So, we analyze the stable operating range of the conductive rod levitated by the axial wheels with the commercial finite element tool in this paper. Specially, as the pole number and the radial width of permanent magnets has much influence on the generated force and thereby the stable region, their sensitivities are analyzed also. The analytic result is compared with experimental result.