• 한국해양환경ㆍ에너지학회지
• /
• 제17권1호
• /
• pp.8-12
• /
• 2014

감압증발장치는 압력을 감소시켜 물의 끓는점을 낮춰주는 원리를 이용한 것으로 온도를 높이는데 필요한 에너지 소모량을 줄일 수 있는 원리로 사용되고 있다. 즉, 온도와 압력의 상관관계 원리를 이용한 것이다. 감압증발장치를 이용하여 해수의 온도별 포화증기압을 적용하여 증발량 실험을 한 결과 $80^{\circ}C$, -40 cmHg의 경우가 가장 많은 증발량을 나타내었으며, 해수의 농도에 따른 인자 실험의 결과에서는 농도가 짙을수록 증발량이 많이 발생하는 것을 알 수 있었다. 또한 압력에 따른 인자 실험의 결과 낮은 압력에서 증발량이 증가하는 것을 알 수 있었다. 결과적으로 증발량의 중요인자는 농도가 큰 부분으로 작용하였으며 다음 요인은 온도로 나타났으며 마지막 요인으로 압력을 들 수 있었다. 본 실험을 통하여 감압증발장치를 이용한 담수화 조건을 확인 할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권4호
• /
• pp.551-559
• /
• 1998

Evaporation and ignition characteristics of fuel droplet have major influences on the efficiency and performance of engine. In the present study the experiment of evaporation and self-ignition of single fuel was performed under the various ambient conditions. An individually suspended droplet of n-heptane n-hexadecane ethyl-alcohol and light oil were employed as a liquid droplet. Evaporation and ignition characteristics were measured by using the video-camera and image processing technique under the various ambient temperatures (up to 1000310 OC)and partial pressure of oxigen(up to 60%) The evaporation curve shows that the droplet life time ignition delay time decreases as the ambient temperature and partial pressure of oxigen increase, The temperature variations of droplet were also reported for various fuel and ambient temperatures. The numerical simulations were carried out to predict droplet diameter and temperature with favorable agreement.

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.19-22
• /
• 2020

The thermal evaporation source is used to prepare thin films by physical vapor deposition. Materials of metals, organic materials, were tested and explained for thermal evaporation experiments. The developed effusion cell performance depends on the type of deposition material, the size of the crucible, the performance of the reflector, etc. and the proper conditions were found by producing, comparing and analyzing several sets of effusion cell to quantitatively evaluate the performance of the cell. The effusion cell for thermal evaporation source is used to prepare thin films of Ag, Cu, Mg.

• Transactions on Electrical and Electronic Materials
• /
• 제7권1호
• /
• pp.21-25
• /
• 2006

In this study, liquid crystal (LC) aligning properties for homeotropic alignment on the $SiO_x$ thin film by electron beam evaporation method with electron beam system in accordance with the evaporation angles were investigated. Also, the control of pretilt angles homeotropic aligned LC on $SiO_x$ thin film as the function of the evaporation angles were studied. The uniform vertical LC alignment on the $SiO_x$ thin film surfaces with electron beam evaporation was achieved with all of the thin film angle conditions. It is considerated that the LC alignment on the $SiO_x$ thin film by electron beam evaporation is attributed to elastic interaction between LC molecules and micro-grooves at the $SiO_x$ thin film surface created by evaporation. The values of the pretilt angles according to the evaporation angle were from about $0.7^{\circ}$ to about $3.4^{\circ}$. The highest pretilt angles of about $3.4^{\circ}$ in aligned NLC on the $SiO_x$ thin film surfaces by electron beam evaporation were measured under the condition of $45^{\circ}$. Also, good LC alignment states on the treated $SiO_x$ thin film layer by electron beam evaporation were observed at annealing temperature of $250^{\circ}C$. Consequently, the high pretilt angle and the good thermal stability of LC alignment on the $SiO_x$ thin film by electron beam evaporation can be achieved.

• 콘크리트학회지
• /
• 제8권1호
• /
• pp.111-120
• /
• 1996

콘크리트의 건조수축 특성은 콘크리트 구조물의 내구성을 결정하는 대단히 중요한 특성으로서 환경적인 요인에 영향을 많이 받는다. 이 환경적 요인은 온도, 습도, 풍속 등으로 구성되어 있는데 이들 개별적인 인자들은 변화폭이 크로, 콘크리트의 건조에 미치는 영향이 복합적이기 때문에 이들의 영향을 개별적으로 평가하는 것은 큰 의의가 없다. 본 연구에서는 건조수축에 영향을 미치는 환경적인 요인들을 통합하고자 증발속도라는 변수를 도입하였다. 적절한 온도와 습도, 풍속, 콘크리트 온도 등을 선정하여 선정된 환경하에서의 증발속도를 증발속도계로 측정하였으며, 이 결과를 기존의 PCA 도표와 비교 평가하였고, 설정된 조건하에서의 실험을 통하여 콘크리트의 건조수축과 증발속도간의 관계를 규명하였다. 또한 건조수축 실험결과와 이 변수 사이의 관계를 정량화하여 건조수축의 예측에 이용될 수 있는 예측모델식과 도표를 개발하였다.

• 물과 미래
• /
• 제6권1호
• /
• pp.5-12
• /
• 1973

A simple regression formula for estimating the lake evaporation rate from the copper-plated pan (diameter 20cm, height 10cm) is derived. A comparison with other formulae indicates that the formula is more accurate than others. An annual map of man evaporation in Korean peninsula has been prepared using the relation. It demonstrates the areal average distribution of mean annual evaporation from a free water surface with no heat storage effect and avected energy owing to differences in the temperature of in-and outflow. The mean annual ratio of the lake to the copper-plated pan evaporation is found to be 0.64. The ratio varies with local conditions from 0.62 to 0.66, and hence it can be considered fairly uniform. However the seasonal variation of the ratio appears to be rather significant. It changes from the lowest of 0.61 to the highest of 0.75.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.101-104
• /
• 2003

저준위 방사성액체폐기물 처리방법으로 에너지 소모가 적은 경제적이고 효율적인 처리방법을 제시하기 위하여 면 과 Polyester 가 함유된 합성섬유를 증발매체로 하여 자연기상 상태의 건조한 공기를 유입하여 방사성 액체폐기물과 접촉시켜 증발하는 연구를 하였다. 본 연구에서는 자연상태의 공기를 강제 유입시켜 액체의 증발현상, 증발매체표면에서의 물질전달 등 이론을 토대로 방사성액체폐기물을 처리하는 연구를 수행하였다. 실험은 방사성폐액을 직접 사용하였으며, 증발에 영향을 미치는 변수에 따라 증발 단위 면적당 방사성 폐액의 증발량측정 및 제염계수를 조사하였다. 증발효과는 유입공기의 습도가 낮고 공기의 유속과 공급액의 유량이 증가하고 폐액의 온도가 높아질수록 증발량이 증가하였다. 실험결과 습도는 70% 이하, 공급폐액의 유량이 $3.4{\ell}/hr\cdotm^2$ 이상, 공기유속은 1.14~l.47 m/sec 범위가 조업조건이며, 이때 제염계수는 $5.1{\times}10^3$, 배출공기의 방사능 농도는 $4.7{\times}10^{-13}{\mu}Ci/\textrm{m}{\ell}{\cdot}air$로 측정되었다. 공급유량이 $4.6{\ell}/hr\cdotm^2$와 공기유속이 1.47 m/sec일때 최대 증발조건으로 확인되었으며 대기의 온.습도 및 풍속에 따른 실험을 통하여 달톤형의 증발식 Air factor $[\textit{Eh}=(0.018 + 0.0141\textitv) {\delta}textitH]$를 도출하였다.

• Macromolecular Research
• /
• 제8권2호
• /
• pp.80-88
• /
• 2000

Biodegradable microspheres were prepared with poly(L-lactide-co-glycolide) (PLGA, 75 : 25 by mole ratio) by an oil/oil solvent evaporation method for the sustained release of anti-AIDS virus agent, AZT The microspheres of relatively narrow size distribution (7.6$\pm$ 3.8 ㎛) were obtained by controlling the fabrication conditions. The shape of microspheres prepared was smooth and spherical. The efficiency of AZT loading into the PLGA microsphere was over 93% compared to that below 15% for microspheres by a conventional water/oil/water method. The effects of Preparation conditions on the morphology and in vitro AZT release pattern were investigated. in vitro release studies showed that different release pattern and release rates could be achieved by simply modifying factors in the fabrication conditions such as the type and amount of surfactant, initial amount of loaded drug, the temperature of solvent evaporation, and so on. PLCA microspheres prepared by 5% of initial drug loading, 1.0% (w/w) of surfactant concentration, and 25$\^{C}$ of solvent evaporation temperature were free from initial burst effect and a near-zero order sustained release was observed. Possible mechanisms of the near-zero order sustained release for our system have been proposed.

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.104-111
• /
• 1992

본 연구에서는 외부 열입력(external heat input)의 조건하에서 증발분출냉각 시스템에서 나타나는 3개의 영역, 즉 증기, 증발 및 액체영역을 고려한 이론해석을 행 함으로써 증발분출냉각 시스템의 열전달 특성을 정성적으로 조사하고자 하였다.

• International Journal of Automotive Technology
• /
• 제2권3호
• /
• pp.109-115
• /
• 2001

A study has been conducted to clarify the effect of watery vapor concentration in hot ambient on droplet evaporation. Droplets of water, ethanol, n-hexadecaneand n-heptane were used in this experimental study. Ambient conditions are fixed at 470 K in temperature, 0.1 MPa in pressure and 2 m/s in velocity of ambient air. Watery vapor concentration was changed 0%～40% by 10% by add water to air. To obtain the time histories of droplet diameter after exposed in ambient, a suspended droplet in hot and humid ambient stream was synchronized with a back flash light, and enlarged droplet images were taken by a CCD camera. The evaporation rate constant of water droplet decreases slightly with the vapor concentration because diffusion velocity reduction of droplet vapor occurs on the surface. The values of ethanol and n-heptane droplet actively increase by effect that water from condensation of vapor flows into the droplet. The evaporation rate constant of n-hexadecane which has higher boiling point than water increases within around 30% of the concentration.