• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.12 no.1
• /
• pp.5-10
• /
• 2001

Glottal incompetence is one of the causative condition of hoarseness. There have been various methods to improve the glottal conditions. Vocal fold augmentation by injection under direct visual control is a quick and simple operation. Various vocal fold augmentation procedures have developed in recent years. Phonosurgical vocal fold injection can be classified as superficial or deep, by the location of the injection. The choice of material fir vocal fold injection is critical and should be determined by the injection location, technique, and the pathologic condition. There are multiple approaches or methods for vocal f31d injection ; the most widely used are presented in detail in this article.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.11
• /
• pp.1885-1891
• /
• 2007

This paper presents a distance relaying algorithm for phase-to-ground faults in transmission lines under Multi-Agent protection environment. In normal condition, a distance relay agent stores the latest states, e.g., voltage of source side, voltage of the opposite side and the loading conditions, etc., through communication between the agents. Once a fault occurs, the relay calculates the fault location using the knowledge about the states just before the fault happens. This stand-alone operation is to improve reliability under the fault condition at which the accuracy or time required for communication may not be guaranteed. The mathematical expression of fault location is derived through loop analysis, before hand, in the manner that both fault current from the opposite end and fault resistance are included implicitly so that their effects are minimized. The suggested algorithm is applied to a typical transmission system with two power sources on both ends to show its effectiveness.

• The Mathematical Education
• /
• v.55 no.2
• /
• pp.233-249
• /
• 2016

In this study, we extracted the background meaning of the condition that four points lie on a circle, analyzed textbooks critically and proposed the orientation to improve the content in the textbook. As results, the condition has a realistic background meaning which is 'mathematical modeling of finding a fair location'. The condition has a mathematical background meanings which are 'a first complex situation distinguished from two points and three points', 'the condition described in the perspective of side and angle in order to overcome the disadvantages of the perpendicular bisectors context' and 'being possible to transfer more than five points'. However it is difficult to understand the reason why the condition is on four points in the current textbook. In addition, it is difficult to recognize the connectivity of a circumcenter of triangle. To overcome these problems, we proposed five orientations to improve the content in the textbook.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.97-108
• /
• 2013

Recently, mobile devices were increased and there was a sharp rise in demand. To exploit the location information of each device, many researcher was studying locating systems. The favorite locating or positioning systems were a GPS using satellites and a RTLS using wireless communication between devices. If some obstacle existed nearby the target device, The system have difference of performance. The obstacles near targets were caused signal disconnection and reflection because of NLOS condition. As the result, the NLOS condition degrade the locating performance. In this paper, we propose a locating system which is cooperated two systems using information reliability estimates from LOS/NLOS condition. We developed proposed system. In addition, we performed fields test and simulation tests at various environment for performance evaluation. As the result, the test showed 97% success rate to estimate NLOS condition. Furthermore, the simulation result of our locating system was increased to 89% compared with a single system.

• Geomechanics and Engineering
• /
• v.19 no.1
• /
• pp.93-104
• /
• 2019

Anomalies and/or fractured grounds not detected by the surface geophysical and geological survey performed during design stage may cause significant problems during tunnel excavation. Many studies on prediction methods of the ground condition ahead of the tunnel face have been conducted and applied in tunneling construction sites, such as tunnel seismic profiling and probe drilling. However, most such applications have focused on the drill and blast tunneling method. Few studies have been conducted for mechanized tunneling because of the limitation in the available space to perform prediction tests. This study aims to predict the ground condition ahead of the tunnel face in TBM tunneling by using an electrical resistivity tomography survey. It compared the characteristics of each electrode array and performed an investigation on in-situ tunnel boring machine TBM construction site environments. Numerical simulations for each electrode array were performed, to determine the proper electrode array to predict anomalies ahead of the tunnel face. The results showed that the modified dipole-dipole array is, compared to other arrays, the best for predicting the location and condition of an anomaly. As the borehole becomes longer, the measured data increase accordingly. Therefore, longer boreholes allow a more accurate prediction of the location and status of anomalies and complex grounds.

• Structural Monitoring and Maintenance
• /
• v.2 no.4
• /
• pp.399-418
• /
• 2015

Automated damage detection through Structural Health Monitoring (SHM) techniques has become an active area of research in the bridge engineering community but widespread implementation on in-service infrastructure still presents some challenges. In the meantime, visual inspection remains as the most common method for condition assessment even though collected information is highly subjective and certain types of damage can be overlooked by the inspector. In this article, a Frequency Response Functions-based model updating algorithm is evaluated using experimentally collected data from the University of Central Florida (UCF)-Benchmark Structure. A protocol for measurement selection and a regularization technique are presented in this work in order to provide the most well-conditioned model updating scenario for the target structure. The proposed technique is composed of two main stages. First, the initial finite element model (FEM) is calibrated through model updating so that it captures the dynamic signature of the UCF Benchmark Structure in its healthy condition. Second, based upon collected data from the damaged condition, the updating process is repeated on the baseline (healthy) FEM. The difference between the updated parameters from subsequent stages revealed both location and extent of damage in a "blind" scenario, without any previous information about type and location of damage.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.218-219
• /
• 2006

This paper is about modeling on 1500V DC electric railroad system. Electric railroad systems have peculiar characteristics against other electric system. The characteristics arc that the railroad systems have electric vehicle loads which are power-varying and location-varying with time. Because of this load characteristic, the electric railroad system modeling which reflects its own characteristics on EMTDC simulation could not be achieved. However, to reflect load characteristic on EMTDC, this paper suggests electric railroad system modeling by using TPS (Train Performance Simulator) that was developed in Korea Railroad Research Institute. A TPS program has various kinds of input data, such as operation condition, vehicle condition, and power system condition. By these data, TPS calculates mechanical power consumption and location, especially it decide electric power consumption on the basis of the fact that consumed electric and mechanical power are equal. Moreover, on this paper, movement of vehicle is reflected on EMTDC simulation as variation of feeder impedance. Also, an electric vehicle load is modeled as time-varying constant power load model.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1207-1212
• /
• 2008

The purpose of this study is to evaluate the location of the outlets in the mechanical ventilation system installed in apartment. We performed the numerical analysis to estimate the ventilation effectiveness and the indoor $CO_2$ concentration considering the occupants and the condition with inlet and outlet in each room. From the numerical results, modified location of the outlets is about 10% high than designed one with respect to the ventilation effectiveness when the occupants are not considered. But designed location of inlet and outlet in living room and kitchen is better than modified one with respect to the reduction of $CO_2$ concentration in the living room and kitchen with occupants. In case of our model, Air change per hour (0.7) is not enough to sustain the acceptable criteria of $CO_2$ concentration (1000ppm) in the room with the occupants

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.30.3-30.3
• /
• 2008

In this study, we investigate the magnetic latitude of phase reversal on the sudden commencement (SC)-associated preliminary impulse with 267 SC events using the ground magnetometer data of the IMAGE from 1997 to 2005. During SC event, geomagnetic fields are affected by various currents flowing in the magnetosphere and/or ionosphere. In particular, high-latitude geomagnetic field variations are significantly dominated by the change of SC-associated field aligned current (FAC). Until now, however, there are few studies to examine where the location of the FAC in the ionosphere is and what determines the location of the FAC. The location of the SC-associated FAC can be examined by using magnetometer data obtained from high-latitude stations distributed along the same magnetic meridian. The phase reversal locations are concentrated two regions, ~62 deg (L~4.5) and ~70 deg (L~8.5) in magnetic latitude. If FAC is a result of a mode conversion from fast mode to Alfven mode, then the FAC location could be determine by the duration time of the input energy. When we use the rise time, dT, as the input energy, there is no relationship between dT and the location where the first pulse of SC is reversed. We consider other factors such as local time and solar wind condition.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.5
• /
• pp.651-659
• /
• 2023

The effect of bio-logger tagging location on blood characteristics and bio-logger attachment efficiency in spotted sea bass (mean body weight 2356.7 g) was investigated. The fish were tagged at four different tagging locations: no-tag (control), operculum attachment (OA), dorsal muscle attachment (DA), and cauda peduncle muscle attachment (CA). The blood properties and bio-logger attachment efficiencies were examined on days 1, 7, 14, and 35 after tagging the bio-logger at each tagging location. During the experimental periods, the concentrations of hematocrit and hemoglobin in whole blood, and GOT (glutamic oxaloacetic transaminase), GPT (glutamic pyruvic transaminase), total protein (TP), glucose, total cholesterol, cortisol, and superoxide dismutase in plasma were not affected by the attachment location of the bio-logger, however, the TP concentration was significantly lower in OA than in the control group on day 7. After tagging for 35 days, the efficiencies of bio-logger attachment in the OA, DA, and CA after tagging for 35 days were 33.3%, 100.0%, and 33.3%, respectively. These results indicate that, in our experimental condition, the most appropriate bio-logger attachment location is DA, providing basic information on bio-logger utilization methods for ecological and biological biotelemetry surveys of the spotted sea bass.