• Smart Structures and Systems
• /
• v.10 no.2
• /
• pp.131-154
• /
• 2012

In this paper, it is aimed to determine the seismic behaviour of highway bridges by nondestructive testing using ambient vibration measurements. Eynel Highway Bridge which has arch type structural system with a total length of 216 m and located in the Ayvaclk county of Samsun, Turkey is selected as an application. The bridge connects the villages which are separated with Suat U$\breve{g}$urlu Dam Lake. A three dimensional finite element model is first established for a highway bridge using project drawings and an analytical modal analysis is then performed to generate natural frequencies and mode shapes in the three orthogonal directions. The ambient vibration measurements are carried out on the bridge deck under natural excitation such as traffic, human walking and wind loads using Operational Modal Analysis. Sensitive seismic accelerometers are used to collect signals obtained from the experimental tests. To obtain experimental dynamic characteristics, two output-only system identification techniques are employed namely, Enhanced Frequency Domain Decomposition technique in the frequency domain and Stochastic Subspace Identification technique in time domain. Analytical and experimental dynamic characteristic are compared with each other and finite element model of the bridge is updated by changing of boundary conditions to reduce the differences between the results. It is demonstrated that the ambient vibration measurements are enough to identify the most significant modes of highway bridges. After finite element model updating, maximum differences between the natural frequencies are reduced averagely from 23% to 3%. The updated finite element model reflects the dynamic characteristics of the bridge better, and it can be used to predict the dynamic response under complex external forces. It is also helpful for further damage identification and health condition monitoring. Analytical model of the bridge before and after model updating is analyzed using 1992 Erzincan earthquake record to determine the seismic behaviour. It can be seen from the analysis results that displacements increase by the height of bridge columns and along to middle point of the deck and main arches. Bending moments have an increasing trend along to first and last 50 m and have a decreasing trend long to the middle of the main arches.

• The Journal of Society for e-Business Studies
• /
• v.23 no.2
• /
• pp.111-121
• /
• 2018

Many problems in rotating machinery such as aircraft engines, wind turbines and motors are caused by bearing defects. The abnormalities of the bearing can be detected by analyzing signal data such as vibration or noise, proper pre-processing through a few signal processing techniques is required to analyze their frequencies. In this paper, we introduce the condition monitoring method for diagnosing the failure of the rotating machines by analyzing the vibration signal of the bearing. From the collected signal data, the normal states are trained, and then normal or abnormal state data are classified based on the trained normal state. For preprocessing, a Hamming window is applied to eliminate leakage generated in this process, and the cepstrum analysis is performed to obtain the original signal of the signal data, called the formant. From the vibration data of the IMS bearing dataset, we have extracted 6 statistic indicators using the cepstral coefficients and showed that the application of the Mahalanobis distance classifier can monitor the bearing status and detect the failure in advance.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.2
• /
• pp.64-70
• /
• 2011

Portable artificial electronic nose (E-nose) system suffers from noisy fluctuation in surroundings such as temperature, vapor concentration, and gas flow, because its measuring condition is not controled precisely as in the laboratory. It is important to develop a simple and robust vapor recognition technique applicable to this uncontrolled measurement, especially for the portable measuring and diagnostic system which are expanding its area with the improvements in micro bio sensor technology. This study used a PDA-based portable E-nose to collect the uncontrolled vapor measurement signals, and applied the image matching algorithm developed in the previous study on the measured signal to verify its robustness and improved accuracy in portable vapor recognition. The results showed not only its consistent performance under noisy fluctuation in the portable measurement signal, but also an advanced recognition accuracy for 2 similar vapor species which have been hard to discriminate with the conventional maximum sensitivity feature extraction method. The proposed method can be easily applied to the data processing of the ubiquitous sensor network (USN) which are usually exposed to various operating conditions. Furthermore, it will greatly help to realize portable medical diagnostic and environment monitoring system with its robust performance and high accuracy.

• Food Science and Preservation
• /
• v.13 no.4
• /
• pp.506-512
• /
• 2006

Gastrodia elata Blume (GEB) is a traditional herbal plant that has been used in Asian countries for centuries as an anticonvulsant analgesic, and a sedative for treating general paralysis, epilepsy, vertigo, and tetanus. This study was designed to optimize conditions for ethanol extracts or GEB by analyzing and monitoring the extraction characteristics with response surface methodology. The extract was used for analysis of the effective components of GEB. The estimated optimal conditions were 63.62% in ethanol of 5.06 mL/g in solvent per sample, and 6.25 hr in extract time. The optimal extraction conditions for $ \gamma-aminobutyric$ acid, were 45.52%, 5.67 mL/g, and 6.04 hr, while those for $\rho-hydroxybenzyl$ alcohol were 62.73%, 5.02 mL/g, and 5.95 hr. Regression equation was generated for each variables and then superimposed them, such as soluble solid, $ \gamma-aminobutyric$ acid and $\rho-hydroxybenzyl$ alcohol content thereby resulting in superimposed values of extinction conditions like $45\sim65%,\;5\sim7mL/g$ and $5\sim7$ hr, respectively.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.4
• /
• pp.207-216
• /
• 2014

Total organic carbon (TOC) is an important indicator used as an direct biological index in the research field of the marine carbon cycle. It is possible to produce the sufficient TOC estimation data by using the Chemical Oxygen Demand(COD) data because the available TOC data is relatively poor than the COD data. The outlier detection and treatment (removal) should be carried out reasonably and objectively because the equation for a COD-TOC conversion is directly affected the TOC estimation. In this study, it aims to suggest the optimal regression model using the available salinity, COD, and TOC data observed in the Korean coastal zone. The optimal regression model is selected by the comparison and analysis on the changes of data numbers before and after removal, variation coefficients and root mean square (RMS) error of the diverse detection methods of the outlier and influential observations. According to research result, it is shown that a diagnostic case combining SIQR (Semi - Inter-Quartile Range) boxplot and Cook's distance method is most suitable for the outlier detection. The optimal regression function is estimated as the TOC(mg/L) = $0.44{\cdot}COD(mg/L)+1.53$, then determination coefficient is showed a value of 0.47 and RMS error is 0.85 mg/L. The RMS error and the variation coefficients of the leverage values are greatly reduced to the 31% and 80% of the value before the outlier removal condition. The method suggested in this study can provide more appropriate regression curve because the excessive impacts of the outlier frequently included in the COD and TOC monitoring data is removed.

• Economic and Environmental Geology
• /
• v.40 no.1 s.182
• /
• pp.29-45
• /
• 2007

Biogeochemical characteristics involving redox processes in groundwater from a riverine alluvial aquifer was investigated using multi-level monitoring wells (up to 30m in depth). Anaerobic conditions were predominant and high Fe ($14{\sim}37mg/L$) and Mn ($1{\sim}4mg/L$) concentrations were observed at 10 to 20 m in depth. Below 20 m depth, dissolved sulfide was detected. Presumably, these high Fe and Mn concentrations were derived from the reduction of Fe- and Mn-oxides because dissolved oxygen and nitrate were nearly absent and Fe and Mn contents were considerable in the sediments. The depth range of high Mn concentration is wider than that of high Fe concentration. Dissolved organics may be derived from the upper layers. Sulfate reduction is more active than Fe and Mn reduction below 20 m in depth. Disparity of calculated redox potential from the various redox couples indicates that redox states are in disequilibrium condition in groundwater. Carbonate minerals such as siderite and rhodochrosite may control the dissolved concentrations of Fe(II) and Mn(II), and iron sulfide minerals control for Fe(II) where sulfide is detected because these minerals are near saturation from the calculation of solubility equilibria.

• The Plant Pathology Journal
• /
• v.21 no.1
• /
• pp.33-38
• /
• 2005

Changes of control efficacy of chemical to potato late blight caused by Phytophthora infestans in potato fields from 2001 to 2004 were examined. Control efficacy of metalaxyl was suddenly decreased from 100% in 2002 to 50% in 2004 and that of dimethomorph also was similar to those of metalaxyl. However, the control efficacy of ethaboxam no great change. Both A1 and A2 mating type isolates were isolated from 2001 to 2004 in several areas in Korea. The majority of the P. infestans isolates were A1 mating type. Total 939 isolates of P. infestans obtained from several areas in Korea from 2001 to 2004 were examined for changes of sensitivity to metalaxyl. Frequencies of metalaxyl resistance isolates were gradually increased from 17% in 2001 to 84.2% in 2004, but isolation frequencies of metalaxyl sensitive and intermediate resistant isolate were decreased. Cause of decreasing control efficacy of metalaxyl was thought by increase of resistance isolates in A1 mating type population according to increasing metalaxyl use. Most isolates were grown at 0.5 ${\mu}g/ml of dimethomorph and isolates grown at 1 ${\mu}g/ml of dimethomorph were approximately 10.2-22.9%. However, no isolate was able to grow at 5.0 ${\mu}g/ml. Based on these results, minimum inhibitory concentrations (MIC) of dimethomorph to P. infestans were determined to be 0.5-1.0 ${\mu}g/ml. Our results indicated that the reason decreasing control efficacy of dimethomorph was not caused by occurrence of resistant isolates. About 5% and 12.1% isolates among the total isolates collected in 2003 and 2004 were grown on V-8 juice rye agar containing 1.0 ${\mu}g/ml ethaboxam. The 2.1 and 25.4% isolates had MICs of 0.2-0.4 ${\mu}g/ml, and MIC values of 87.9% and 74.3% isolates were less than 0.2 ${\mu}g/ml concentrations of ethaboxam. Therefore, resistance development by P. infestans to ethaboxam is not likely to occur in the natural condition.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.9 no.4
• /
• pp.179-195
• /
• 2004

The trophic state of the coastal waters of the southern part of Korea was assessed using biogeochemical data obtained from the National Marine Environmental Monitoring Program conducted by the National Fisheries Research and Development Institute for six years. The trophic state of different areas, analyzed by non-metric multi-dimensional scaling (MDS) analysis, could divide the areas into three groups. Masan Bay, with suboxic water masses and/or the highest concentrations of dissolved inorganic nitrogen and phosphorus occurred, was assessed as being in a hypertrophic state. Ulsan Bay, Onsan Bay, Busan and Jinhae Bay, located near strong point sources, were in a eutrophic state. Other areas, including Tongyong, Yosu, Mokpo and Jeju island, were evaluated as being in a mesotrophic state. During 1997 to 2002, the average values of excess nitrogen, which is the difference between the measured dissolved inorganic nitrogen (DIN) and the corrected DIN using the Redfield ratio, were positive at Ulsan, Onsan, and Busan, where there were inflows from polluted rivers. In contrast, those were negative values in Haengam Bay, Gwangyang Bay and nearby Yosu. This suggests that the limiting element for phytoplankton growth differed among sites. The time series data of excess nitrogen showed gradual decrease over time in the hypertrophic waters, but the opposite trend in the mesotrophic waters. This indicated that the ratio of nitrogen to phosphate varied according to the trophic state of the coastal waters. The enrichment of organic matter in sediment in eutrophic waters would disturb the normal pattern of biogeochemical cycling of nitrogen and phosphate. In order to assess the condition of the coastal environment, the benthic boundary layer should be considered.

• Journal of environmental and Sanitary engineering
• /
• v.7 no.2
• /
• pp.1-10
• /
• 1992

Since 1960's along with industrialization and urbanization, economic growth has been . achieved, however, at the same time, environmental condition has been seriously deteriorated. . Currently, volume of wastewater has been increasing at annual rate of 7% in sewage and 20% in industrial wastewater. However, the nation's sewage treatment serves only 33% of the municipal wastewater as of 1991. Major portion of air pollutants comes from combustion of oil and coal which comprise 81% of total energy use and emission gases from motor vehicles increasing at an accelerated rate. It is known that Korea generates the highest amount of waste per capta. Nevertheless, it is not sufficient to reduce the volume of waste by means of resources recovery and recycling. Recognizing the importance of global environmental problems such as ozone layer depletion, global warming and acid rain, international society has been making various efforts since the 1972 Stockholm conference. In particular, it is expected that the Rio conference which has adopted the Rio declaration and Agenda 21 will form a crucial turning point of the emerging new world order after the Cold War confrontation. To cope with such issues as domestic pollution and global environmental problems, the fundamental national policy aims at harmonizing "environmental protection and sustainable development". The Ministry of Environment has recently set up a mid-term comprehensive plan which includes annual targets for environmental protection. According to the government plan, gradual improvement of various environmental conditions and specific measures to achieve them is planned in time frame. Additional sewage treatment plants will be constructed in urban areas with the target to treat 65% of the nation's municipal sewage by 1996. Supply of clean fuels such as LNG will also be expanded starting from large cities as a cleaner substitute energy for coal and oil. In parallel with expansion of LNG, emphasis will be placed on installation of stack monitoring system. Due to the relatively limited land, government's basic policy for solid waste treatment is to develop large scale landfill facilities rather than small sized ones. Thirty three regional areas have been designated for the purpose of waste management. For each of these regions, big scale landfill site is going to be developed. To increase the rate of waste recycling the government is planning to reinforce separate collection system and to provide industries with economic incentives. As a part of meeting the changing situation on global environmental problems after UNCED, and accommodation regulatory measures stipulated in the global environmental conventions and protocols, national policy will try to alter industrial and economic structure so as to mitigate the increasing trends of energy consumption, by encouraging energy conservation and efficiency. In this regard, more attention will be given to the policy on the development of the cleaner technology. Ultimately, these policies and programs will contribute greatly to improving the current state of national public health.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.3
• /
• pp.155-161
• /
• 1998

Retardation effect of heavy metals in soils caused by adsorption onto the surfaces of solids particles is well known phenomenon. In this study, we investigated the retardation effect on the mobility of a Zn in a sandy soil by conducting batch and column tests. The column test consisted of monitoring the concentrations of effluent versus time known as a breakthrough curve (BTC). We used NaCl and ZnCl$_2$ solutions with the concentration of 10 g/L as a tracer, and injected them respectively into the inlet boundary of the soil sample as a square pulse type, and monitored the effluent concentrations at the exit boundary under a steady state condition using an EC-meter and ICP-AES. The batch test was conducted based on the standard procedure of equilibrating fine fractions collected from the soil with various initial ZnCl$_2$ concentrations, and analysis of Zn ions in the equilibrated solutions using ICP-AES. The results of column test showed that i) the peak concentration of ZnCl$_2$analyzed by ICP was far less than that of either NaCl or bulk electrical conductivity and ⅱ) travel times of peak concentrations for two tracers were more less identical. The relatively low concentration of Zn can be explained by ion exchange between Zn and other cations, and possible precipitation of Zn in the form of Zn(OH)$_2$due to high pH range (7.0∼7.9) of the effluent. The identical result of travel times of peak concentrations indicates that the retardation effect is not present in the soil. The only way to describe the prominent decrease of Zn ion was to introduce decay or sink coefficient in the CDE model to account for irreversible decrease of Zn ions in the aqueous phase.