• The Journal of the Acoustical Society of Korea
• /
• v.25 no.5
• /
• pp.207-212
• /
• 2006

The purpose of this study was to compare voice parameters in auditory conditions (normal/noise/music) between a teacher group and a control group. Results of statistical analysis showed that the teacher group had higher jitter (%) and shimmer (%) values than the control group. It indicated that the teacher group had larger variations in pitch and dynamic of their voice. In the teacher group, the voice under noisy condition showed a higher value of fundamental frequency than that under normal condition. though its fundamental frequency did not show any significant difference between the noisy condition and the musical condition. In the control group, however, although the voice under noisy condition also showed a higher value of fundamental frequency than that under normal condition, its fundamental frequency was significantly different between the noisy condition and the musical condition.

• Korean Journal of Cognitive Science
• /
• v.13 no.3
• /
• pp.47-60
• /
• 2002

The study investigated the effects of types of presentation and cognitive load on multimedia learning. In experiment 1, subject were 90 elementary school students. The subject were assigned in three conditions: Narration and Text (NT) condition, Animation and Narration(AN) condition, Animation and Text(AT) condition. The result showed that AN condition improved the learning performances in comparison with AT condition, NT condition. Experiment 2 was administrated to 87 undergraduate students. They were participated in three conditions, also. The conditions were Animation and Text (AT) condition, Animation and Narration (AN) condition, Animation, Narration and Text (ANT) condition. the results showed that AN condition was greater in AT, ANT condition. The results from a series of these experiments imply that varying the types of presentation of identical learning materials had influences on the performances. Multimedia presentation(animation and verbal conditions) improved the learning performances in comparison with monomedia presentation(verbal condition), and the advantage was raised when learners were provided the learning material in the multimodal and multimedia environment(AN condition). Also, it came out that redundant text identical to narration disrupted learning when learners were in the picture (either animation or illustration) and narration conditions. Likewise, also for adults, performances were improved in the multimodal conditions and redundant text identical to narration was not helpful for learning. These results are evidences for the dual-coding theory and the cognitive load theory.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.1
• /
• pp.20-27
• /
• 1996

Greenhouse experiment was carried out to investigate the specifics in growth, weed competition, and herbicide response of soybean(Glycine max) under foggy condition. Plant height and leaf stage of soybean under foggy condition were greatly increased through all growing stage comparing with non-foggy condition. At 100 days after seeding, plant height of soybean also was increased by 14％ while number of pods, number of grains per pod were reduced by 16, 24 and 23％, respectively comparing with non-foggy condition. On the other hand, plant height of soybean under foggy condition was reduced with increasing the duration of competition and this tendency was similar to non-foggy condition. Plant height was reduced by above 50-day competition. Number of pods per plant of soybean was reduced regardless of foggy condition. Among the herbicides treated, quizalofop caused slightly crop injury under foggy condition, but the other herbicides did not affect growth of soybean. Number of pods and 100-grain weight of soybean by treatment of herbicides were similar to that of the untreated control but those of soybean under foggy condition were significantly reduced. At 40 days after herbicide application, weeding efficacy (based on shoot fresh weight) of herbicides treated under foggy and non-foggy condition, released exellent data(above than 97％) in all regardless foggy condition.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.433-436
• /
• 2009

This study is concerned with an effect of frictional condition in a forward/backward combined extrusion process. Generally, the material flow of the billet is influenced by the corners of the die cavity, the ratio in reduction in area, and thickness ratio of backward can thickness to forward can thickness. In addition, the frictional condition in contact area between the billet and the punch/die also affect the material flow. This paper investigated the effect of frictional condition for variable friction factors. The FEM simulation has been carried out in order to examine the effect of frictional condition. Deformation patterns and flow characteristics were examined in terms of design parameters such as extruded length ratio etc. Die pressure exerted on the die-workpiece interface is calculated by the simulation results and analyzed for safe tooling. Therefore the numerical simulation works provide a combined extrusion process of stable cold forging process planning to avoid the severe damage on the tool.

• New & Renewable Energy
• /
• v.5 no.3
• /
• pp.22-25
• /
• 2009

For increasing the output voltage, six SMD(surface mount device) type AlGaAs/GaAs solar cells were connected in series. The electrical properties of the array were measured and compared with one sun (100 mW/$cm^2$) and indoor light (480 lux) conditions. Under one sun condition, output power was 21.57 mW and it was $14.67\;{\mu}W$ under indoor light condition. Under the indoor light condition, the intensity of the light is very low compared to one sun condition. Thus the Voc(open circuit voltage) and Isc (short circuit current) of the sample under indoor light condition decreased very much compared to that of under the one sun condition. This kind of solar cell power supply can be used as a power source for ubiquitous sensor network (USN).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.342-346
• /
• 2012

This paper presents a loop impedance(inner loop impedance & external impedance) measurement method in TN system. When the measurement of a loop impedance then the measurement result have a some error by load condition. In this paper suggest the loop impedance measurement on actual loading condition by two experiment. one was laboratory condition and the other was the actual measurement on site. Analysis result, measuring error by load condition has not effect on measuring loop impedance.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.668-671
• /
• 2001

For the saving of energy consumption, it is necessary that the high efficient energy transfer machine. We found the optimum operating condition of screw water chiller during this performance test. The specifications of compressor for this performance test are as follows. Built-in volume ratio; Vi=2.4, using refrigerant; HCFC-22, nominal motor output; 60kW(80Hp). We found the test results on water cooled chiller standard test condition that the evaporating capacity is increased 8% maximum and 5.6% under same operating condition. and COP is increased 11 % max. and 8% under same operating condition with change of the evaporating inlet/outlet condition. For the results of these test, we can estimate the optimum operating condition of water cooled type screw chiller.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.10
• /
• pp.1508-1512
• /
• 2012

This paper presents a relaxed stability condition for continuous-time affine fuzzy system using fuzzy Lyapunov function. In the previous studies, stability conditions for the affine fuzzy system based on quadratic Lyapunov function have a conservativeness. The stability condition is considered by using the fuzzy Lyapunov function, which has membership functions in the traditional Lyapunov function. Based on Lyapunov-stability theory, the stability condition for affine fuzzy system is derived and represented to linear matrix inequalities(LMIs). And slack matrix is added to stability condition for the relaxed stability condition. Finally, simulation example is given to illustrate the merits of the proposed method.

• Journal of the Korean Society of Industry Convergence
• /
• v.14 no.2
• /
• pp.73-78
• /
• 2011

Power consumption for wire gauge impeller in cylindrical agitated vessel was measured over a wide range of Reynolds number from laminar to turbulent flow regions. The power correlation were obtained agitation power input of WM4 at gassing condition in turbulent region, at gassing condition in transient region and at gassing condition in laminar region. Also the compared with effect of impeller diameter and blade width on agitation power input at gassing condition in turbulent region, at gassing condition in transient region and at gassing condition in laminar region.

• Computers and Concrete
• /
• v.18 no.1
• /
• pp.69-97
• /
• 2016

Performance-based remaining life assessment of reinforced concrete bridge girders, subject to chloride-induced corrosion of reinforcement, is addressed in this paper. Towards this, a methodology that takes into consideration the human judgmental aspects in expert decision making regarding condition state assessment is proposed. The condition of the bridge girder is specified by the assignment of a condition state from a set of predefined condition states, considering both serviceability- and ultimate- limit states, and, the performance of the bridge girder is described using performability measure. A non-homogeneous Markov chain is used for modelling the stochastic evolution of condition state of the bridge girder with time. The thinking process of the expert in condition state assessment is modelled within a probabilistic framework using Brunswikian theory and probabilistic mental models. The remaining life is determined as the time over which the performance of the girder is above the required performance level. The usefulness of the methodology is illustrated through the remaining life assessment of a reinforced concrete T-beam bridge girder.