• 한국구조물진단유지관리공학회 논문집
• /
• 제23권5호
• /
• pp.75-83
• /
• 2019

파리기후협정에 따른 온실가스 자발적 감축 의무 이행을 위해 세계적으로 석탄발전과 원자력발전의 비중을 줄이고 태양광 발전을 비롯한 재생에너지의 보급에 국가적 노력을 기울이고 있다. 우리나라도 법령을 도입하여 2040년까지 재생에너지의 발전비중을 30~35%까지 늘리고자 하고 있다. 또한 국외에서는 태양광 발전을 보도 및 도로에 적용하고자 하고 노력하고 있으나 국내의 경우 관련 연구가 전무한 실정이다. 따라서 태양광발전 도로를 개발하기 위한 선행연구로서 보도 및 광장에 적용가능한 태양광 발전 콘크리트 블록을 개발하였으며 이를 현장에 시공하여 적용성을 평가하였다. 실내실험결과 압축강도는 25.5~35.7MPa이 측정되었고 휨강도는 5.1~10.5MPa이 측정되어 국내 기준은 모두 만족하는 것으로 나타났으나 단위시멘트량이 많을수록 부순잔골재의 혼입에 따라 강도가 낮게 측정되었다. 흡수율은 최대 5.7%로 나타나 국내 기준인 7%이하를 만족하였으며 동결융해시험 결과 100싸이클 후 압축강도 감소율은 최대 6.3%로 나타나 양호한 수준으로 측정되었다. 시공 후 침하량을 측정결과 최대 2.498mm가 측정되었으며 전면적에 대해 불규칙한 침하가 발생하였는데 이는 시공시 모래층의 다짐이 불량하였거나 우수에 의한 모래 유출로 인한 것으로 판단된다. 초기발전량의 경우 일사량을 고려하면 적정량이 측정되었다. 태양광 패널과 콘크리트 블록의 유지관리 기법은 추후 연구를 통하여 보다 효율적으로 확립할 필요가 있다.

• 한국건축시공학회지
• /
• 제7권2호통권24호
• /
• pp.85-92
• /
• 2007

In the past, recycled aggregate was used very limitedly in low value-added areas such as the base layer of roads. However, in response to the shortage of natural aggregate, high consciousness of resource saving and changed idea on environment, the quality of recycled aggregate has been improved considerably, and the percentage of recycled construction waste is increasing every year compared to simple landfill or incineration. Recently the Act on the Promotion of Construction Waste Recycling was enacted on December 2003 for the efficient use of recycled aggregate, and the Standards for the Quality of Recycled Aggregate for Concrete (Proposal) were announced in order to use and manage recycled aggregate according to quality. According to the Standards for the Quality of Recycled Aggregate for Concrete (Proposal), it is recommended to substitute recycled coarse aggregate and fine aggregate below 30% each. However, compared to the trend of recycling, the recycling rate of aggregate is still quite low. It is because of low performance of recycled aggregate, users' lack of understanding, etc. These problems basically come from the decrease of strength of recycled concrete resulting from the use of recycled aggregate, and recycled aggregate is still considered not reliable because there have been not many cases of actual application. If the basic problem of strength decrease is solved and data on recycled aggregate is provided through actual field placing, we may maximize the use of recycled aggregate. Thus, in order to maximize the use of recycled aggregate that satisfy the recycled aggregate quality standards, the present study made a mock-up similar to real structures, evaluated its performance and examined the field applicability of recycled aggregate concrete.

• 한국지반공학회논문집
• /
• 제37권3호
• /
• pp.43-50
• /
• 2021

우리나라는 산지가 많은 지형적인 특성으로 도로와 도시 개발에 따라 산지를 굴착하고 옹벽을 설치하는 공사가 매년 증가하고 있다. 특히 Panel식 옹벽은 안정성이 높기 때문에 사용빈도가 높으며, 일반적으로 Bottom-up방식을 사용하고 있다. 하지만 옹벽을 설치하기 위해 1:0.3정도의 기울기로 굴착 후 옹벽을 시공하는 방식인데 이러한 방식은 경사굴착으로 인해 추가 토공처리가 필요하며, 되메움과 다짐불량에 의한 안정성 저하 등의 문제점을 지니고 있다. Top-down방식의 경우 이러한 문제점을 보완할 수 있다. 하지만 Panel을 사면에 부착시키기 위해 사용되는 모르타르로 인해 옹벽과 사면 사이에 불투수층이 생긴다. 따라서 본 연구에서는 가상의 사면에 불투수층을 고려하여 배수시스템들의 역할이 우기시 사면의 안정성에 미치는 영향에 대하여 비교 분석하였다.

• Structural Engineering and Mechanics
• /
• 제84권2호
• /
• pp.143-154
• /
• 2022

Corrosion of steel reinforcement is considered as the main cause of concrete structures deterioration, especially those under humid environmental conditions. Hence, fiber reinforced polymer (FRP) bars are being increasingly used as a replacement for conventional steel owing to their non-corrodible characteristics. However, predicting the shear strength of beams reinforced with FRP bars still challenging due to the lack of robust shear theory. Thus, this paper aims to develop an explicit data driven based model to predict the shear strength of FRP reinforced beams using multi-objective evolutionary polynomial regression analysis (MOGA-EPR) as data driven models learn the behavior from the input data without the need to employee a theory that aid the derivation, and thus they have an enhanced accuracy. This study also evaluates the accuracy of predictive models of shear strength of FRP reinforced concrete beams employed by different design codes by calculating and comparing the values of the mean absolute error (MAE), root mean square error (RMSE), mean (𝜇), standard deviation of the mean (𝜎), coefficient of determination (R²), and percentage of prediction within error range of ±20% (a20-index). Experimental database has been developed and employed in the model learning, validation, and accuracy examination. The statistical analysis illustrated the robustness of the developed model with MAE, RMSE, 𝜇, 𝜎, R², and a20-index of 14.6, 20.8, 1.05, 0.27, 0.85, and 0.61, respectively for training data and 10.4, 14.1, 0.98, 0.25, 0.94, and 0.60, respectively for validation data. Furthermore, the developed model achieved much better predictions than the standard predictive models as it scored lower MAE, RMSE, and 𝜎, and higher R² and a20-index. The new model can be used in future with confidence in optimized designs as its accuracy is higher than standard predictive models.

• Geomechanics and Engineering
• /
• 제36권1호
• /
• pp.39-50
• /
• 2024

Bitumen and high-quality subangular aggregates, the two principal materials used for asphalt concrete construction, are finite and expensive materials. The general availability of crumb rubber and naturally occurring aggregates of different shapes, especially flat and elongated shapes, indicates that they are feasible alternative materials for expanding the volume of bitumen and utilizing a wider range of aggregate shapes for the development of asphalt concrete, with an associated environmental benefit. The study investigated the effect of adding up to 15% crumb rubber and aggregates sorted into different groups, i.e., rounded, elongated, flat, and their combinations, on the rheological and mechanical properties and durability of 50/70 of hot-mix asphalt pavement. The addition of crumb rubber decreased ductility and penetration but increased the softening point. For a 5.5% bitumen content, asphalt concrete briquettes consisting of 7% crumb rubber and three types of aggregate shapes, i.e., 100% rounded, a mix of 75% rounded and 25% elongated, and a mix of 75% rounded, 15% elongated and 10% flat, were associated with high Marshall stability and indirect tensile strength as well as low lateral deformation due to their high solidity and moderate angularity ratio. Also, the addition of 7% crumb rubber resulted in a significant improvement in the tensile strength ratio and rebound strain of briquettes consisting of 75% rounded and 25% elongated aggregates and those with 75% rounded, 15% elongated and 10% flat aggregates. In relation to the parameters investigated, the three groups of briquettes met some of the local (South Africa) requirements for the surface course and base course of low traffic volume roads.

• 한국산학기술학회논문지
• /
• 제21권2호
• /
• pp.503-510
• /
• 2020

친환경 산악철도는 산악지역 환경보전을 위해 기존 급곡선·급경사 도로 위에 매립된 콘크리트 톱니 궤도에서 운행하게 된다. 폭이 좁은 도로 특성상 단선 구간이 많아지고, 교행에 따른 분기부가 많이 존재한다. 분기부에서 기존 선로전환기와 히팅장치는 중앙 톱니 궤도의 이동 공간 확보, 두터운 결빙의 신속히 제거 등이 불가하여 산악철도에 적용하기 곤란하다. 이런 문제 해결을 위해 궤도 블록 이동 선로전환기와 고주파유도 히팅장치를 개발하였다. 개발 선로전환기는 콘크리트 톱니궤도 블록을 유압 액튜에이터를 이용하여 이동시킴으로 선로를 전환할 수 있고, 크로싱의 결선부가 없어져서 탈선의 위험이 감소되며, 쇄정도 간편해진다. 히팅장치는 고주파 유도가열을 이용하여 발열 효율을 높임으로 톱니궤도의 두터운 결빙을 신속히 제거할 수 있다. 선로전환기와 히팅장치의 시작품을 제작하여 동작시험을 실시함으로 성능을 입증하였다. 히팅장치는 기존 방식에 비해 10배 이상 발열 효율이 있음을 확인하였다. 개발된 선로전환기와 히팅장치는 동절기 산악트램의 운행을 위한 필수 핵심기술로서, 산악철도의 안전성 및 효율을 높임으로 국내외 산악관광지의 산악철도 도입 확산에 기여할 수 있다. 또한 산악철도는 동절기 교통이 두절되는 지역주민들에게 교통기본권을 제공하고, 관광 활성화와 지역경제 발전 효과를 가져올 수 있다.

• 한국환경과학회지
• /
• 제16권3호
• /
• pp.385-392
• /
• 2007

Currently, portable equipment for recycling of waste asphalt concrete (ASCON) has been used. However, any air pollution control devices are not attached in the simple portable one. Thus, a lot of air pollutants have been produced from recycling processes of waste ASCON which resulted from aging of paved roads or repavement of roads. This study deals with a preliminary result of concentration analysis of air pollutants obtained from a pilot and a real recycling processes of waste ASCON using simple portable recycling equipment. Air pollutants were taken from 4 steps of the pilot recycling process including an initial heating by liquid petroleum gas (LPG), intermediate heating and melting (H&M) process, final H&M process, and pavement processes using recycled ASCON at the recycling site. Also, air pollutants were taken front 4 steps of the real recycling processes including an initial H&M, final H&M and mixing, loading of recycled ASCON to dump trucks, and at the recycling site after leaving the loaded dump trucks for real pavement sites. The air pollutants measured in this study include volatile organic compounds (VOCs), aldehydes, particulate matter (PM: PM1, PM2.5, PM7, PM10, TSP (total suspended particulate)). The identified concentrations of VOCs increased with increasing time or degree for H&M of waste ASCON. In particular, very high concentrations of the VOCs at the status of complete melting, which is exposed to the air, of the waste ASCON just before paving tv the recycled ASCON at the recycling site. Also, considerable amount of VOCs were identified from the recycling equipment after the dump trucks leaded by recycled ASCON leaved the recycling site for the pavement sites. The relative level of formaldehyde exceeded 80% of the aldehydes Identified in the recycling processes. This is because the waste ASCON is exposed to direct flame of LPG during H&M processes. The PM concentrations measured in the winter recycling processes, such as the loading and rotation processes of waste ASCON into/in the recycling equipment for H&M, were much higher than those in the summer ones. In particular, the concentrations of coarse particles such as PM7 and PM10 during the winter recycling were very high as compared those during the summer one.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.93-99
• /
• 2008

The SeoulMerto, operating subway line No.$1{\sim}4$, was constructed in the metropolitan Seoul with the highest population. When it was built, the design was challenged to sharp curved tracks considering the protection of buildings, cultural assets, the connection to ground roads and rivers as well as to elevated railway in some parts. Lots of residential apartments and business complex have gradually increased in the area around subway stations and railway lines according to the urban development. Consequently, Requirements of better quality of life and comfortable environment caused the citizen complain for the noise. It has become one of serious social issues. In this paper, Noise level was analyzed using noise map measured in the running train of all routes. The analysis on the noise level was conducted according to railway type, track components type, seasonal type, retirement degree of the vehicle and subway station. Especially, Noise characteristics were analyzed by noise level data measured in the inside and outside of the train with geometry types of the concrete track. This study will contribute fundamental data for the "The Development of Sound-Absorbing Block on Concrete Track" promoted on The National R&D Project.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.873-882
• /
• 2021

In this study, a study was conducted to develop a system for predicting/responding to black ice occurring on roads in winter. Tests conditions were studied by making models of cement concrete pavement and asphalt concrete pavement. In order to freeze water on the manufactured model package, an tests was conducted at a temperature below zero using a freezer, and the freezing process was photographed using a thermal imaging camera. Black ice is generated when water is present on the road surface and the temperature is below freezing or the road surface temperature is below the dew point temperature. Under sub-zero conditions, the pavement, water, and ice were classified with a thermal imaging camera. As a result of the tests, it was possible to distinguish with a thermal imaging camera at a temperature below freezing in the same freezer due to the difference in the emissivity of the packaging, water, and ice. In the process of changing from water to ice during the tests, it was analyzed that ice and water were clearly distinguished by the thermal imaging camera due to the difference in emissivity and reflectance, so black ice could be predicted using the thermal imaging camera.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.204-205
• /
• 2022

Recently, the application of BIM has been continuously expanded according to various government policies, and the application performance is being analyzed in BIM projects such as roads and railways. In line with this trend, the government is making additional efforts to introduce full-scale design BIM. The BIM design in the public sector is directly related to the estimated price. However, looking at the current status of BIM introduction, there is no support system in place for calculating the estimated price. Therefore, this study intends to analyze the priority activity that is easy to develop BIM unit price among the construction standard unit Price of construction work. In this study, in order to derive the BIM-based priority activity, BIM application statements and application guidelines were analyzed. As a result of the analysis, cast-in-place concrete construction (civil engineering) and reinforced concrete construction (architecture) were deduced as suitable construction activities for the preferential application of BIM. Since the results presented in this study are a rough analysis, it is judged that additional detailed analysis is necessary for the future.