• Journal of Digital Convergence
• /
• v.15 no.3
• /
• pp.211-219
• /
• 2017

Among government projects for reduction of coastal disaster, coastal maintenance project stage 1(2000~2009) and stage 2(2010~2019) to reduce coastal erosion and sedimentation are currently under process. In performing the coastal maintenance projects, it is necessary to install artificial concrete armor units for coastal protection. Presently in Korea, products manufactured in Japan are applied to the site, or blocks self-developed by the construction firms are installed. However, there is a lack of technical reviews such as verification of hydraulic characteristics, securing the stability and design techniques. This study is intended to develop waterfront shore protection blocks with good accessibility of people and excellent coastal disaster reduction and protection capability. Through this study, hydraulic characteristics and stability coefficients of shore protection blocks could be drawn.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.2
• /
• pp.131-138
• /
• 2013

This study was carried out to investigate the possibility of using basalt powder sludge instead of sand in a normal cement dry mortar as a way to recycle basalt powder sludge, which is a waste product from the manufacturing a process of basalt in Jeju. Basic performance evaluations of the dry mortar material included a compressive strength test, a flexural strength test, and SEM to observe the micro structure. The compressive and flexural strengths were increased to a replacement ratio of 21% of basalt powder sludge, whereby a strength enhancement of about 40% greater than that of normal dry mortar was shown. However, the creation of hydration products affected the replacement ratio of the basalt powder sludge. The possibility of using basalt powder sludge waste was identified in this study, and results showed that the basalt powder sludge waste could be used as a material for a secondary product of concrete.

• The Research Journal of the Costume Culture
• /
• v.26 no.2
• /
• pp.188-202
• /
• 2018

This study aimed to categorize women's body shapes by type after extracting prototypes of 25~34 year old Korean woman. The standardizing research service project conducted by the Ministry of Commerce, Industry and Energy in 2005, divided the age ranges of adult women into three groups: 18~24 years (young), 25~34 years (young-adult) and 35~49 years (adult). This study utilized this age division method to create a concrete body type categorization schema with the most marriageable period, 25 to 34 years old as target age the target age group. We used, measurement data from the 7th Korean Human Body Size Survey (Size Korea) for the body shape analysis. We completed a statistical analysis using the statistical program SPSS 21. After creating the body types using CLO 3D, which is based on the 7th Korean human body measurements, we input data for the average size for each type into the Avata. We then compared and analyzed the cross sections using the Rapidform XOR program. The results of the type-specific characteristics are as follows: big square body of obese body, small square body of plain flat body with tall, plain square body of plain flat with short, triangular body of lower body obesity there was. Significantly, the results of this study should facilitate the development of various apparel products using mass customization or easy-order systems.

• Hwankyungkyoyuk
• /
• v.12 no.1
• /
• pp.172-188
• /
• 1999

Mathematics has been usually recognized as value-neutral and anti-ideological subject, and as a result, it has not dealt with environmental problems clearly. Also, it is not easy to find any environment-related contents in the 7th mathematics curriculum. However, because mathematics is also precious human products and essence, in any ways there is a need to reflect the social issues in the mathematics subject which speak for human mental activities. If this need is admitted to change the mathematics contents to the direction of social issues, environmental problems can stand out and be dealt in the mathematics education. Among the 6 domains in the 7th mathematics curriculum, the environmental problems can be dealt with in the domains of ‘numbers and operation’, ‘letters and formulas’, ‘regularity and function’, ‘chances and statistics’, ‘measurement’ except in the domain of ‘diagrams’. Also, the '문장제들' which takes up a considerable part of mathematics textbooks needs the authentic situation, and thus it will be possible to take environmental situations as mathematical materials. Furthermore, one of the 7th mathematics curriculum is that it suggested further study in each level of each domain, the representative pattern of which is the application of the mathemantics contents to the daily life. With this kind of mathematics further study contents, environmental problems can provide a variety of contents for the further study. From this viewpoint, it can be expected that the contents of environmental education will be increased in the mathematics subject. Under the recognition that the mathematics subject cannot be an exception in considering environmental problems, this study has studied some concrete plans and examples for how the mathematics textbooks based on the 7th educational curriculum can deal with environmental Problems.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.165-171
• /
• 2016

The objective of this study is to evaluate the compressive strength development and ecological characteristics of mortars using expanded vermiculite absorbing bacteria as a fundamental investigation to develop precast eco-concrete products. For bacterial growth under the high-alkalinity and high-dried environments within hardened mortars and for creating plant growth function to mortars, Bacillus alcalophilus and Rhodoblastus acidophilus were separated and cultured. The cultured bacteria were absorbed into expanded vermiculite selected for bacteria shelter. The expanded vermiculite absorbing bacteria was then added into mortar mixture as a volumetric replacement of fine aggregate. Test results showed that the developed technology is very effective in enhancing the plant growth onto the hardened mortars and reducing the COD and T-N concentration in raw water. The optimum replacement level of expanded vermiculite absorbing bacteria can be recommended to be less than 10% considering the compressive strength development and cost of mortars along with the ecological effectiveness.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.71-74
• /
• 2007

With the changes of times the building materials tend to extend the demand for application under the special environment. Since high-ductile mortar is developed, the building materials show excellent performance like toughness, compression, tensile, and bending, etc. in the general concrete from the existing brittle point. And, recently they are widely used as repairing and reinforcing materials both at home and abroad because they are recognized as excellence like durability and fire-resistance. However, it is in a situation of creating problems in durability because it frequently happened deterioration of buildings that have already repaired and reinforced at a time when it requires reconstruction of recently deteriorated construction structure recently. Therefore, in this study improved with a more repair Material development and reinforcement of the second high-ductile mortar products for a variety of basic materials were presented want, research plans used include traditional repair materials and the newly developed PCM (polymer cement mortar) structural reinforcement type indicated that comparison. PCM analysis in order to present a rate depending on the types fiber 0, 1.2 and 2.0(%) at three levels and mixture water according to ratios of weight to Plain in the 2.0 and 1.85(kg) at two levels is set, the results were as follows. 1) This study has shown that PCM had excellent strain hardening behavior at the same time that the bending stress increased according to the fiber contents. 2) This study has shown that it had the durability performance due to the high substance transmission according to the fiber contents.

• Journal of Haehwa Medicine
• /
• v.9 no.1
• /
• pp.711-724
• /
• 2000

I reached following conclusion through a bibliographic study about the drug dependence. 1. The drug dependence is the case that taking drugs continually in order to get around discomfort and get mental drug efficacy. that is also the state of poisoning that shows compulsions that using all means to get drugs. the drug dependence is coincident with alcolism in Oriental Medicine. 2 Medicinal matters that causes the drug dependence consist of two field. one is licit drugs, including a tranquilizer, a sleeping pill, anti-anxiety drug, alcohol, caffeine, tobacco, etc. the other is illict drugs, including opium products, psychostimulant, a hallucinogen, aromatic agent(adhesives, LSD, etc.) 3. Drugs that causes dependences has the habit which causing mental dependences and the medicinal poisining which causing physical dependences. 4. A syndrome of abstain from the drug which rides on all kinds of drugs is analogous to depressive psychosis, epilepsy, insanity, depressive syndromes, disorder of internal organs, histery, dizziness, etc. 5. The drug dependence causes visceral dysfunction, that is chiefly inflammatory lesion of brain, heart lung etc. (inflammatory lesions os mainly due to infect.) and injuries liver which removes toxic agents and kidney which is an excretory organ. 6. The treatment of the drug dependence, which needs at first check the medical record and the syndrome, is consist of the expectant treatment and isolating treatment as a rule and sometimes mental therapeutics is going on at the same time. 7. The oriental medical cure of the drug dependence needs more concrete study.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.45-57
• /
• 1992

In this paper, the trends for the standardization of the product model was surveyed, and the product model can be used as concrete means to realize the communication of information between the CAD/CAM softwares, which are used for the design and manufacturing of the complex products such as ships. We have proposed the newly developed methodology for the representation and definition of the ship model on a basis of the product model. And also we have studied the product modeling technology for the aspect of an application, and the object-oriented system technology have been surveyed for the system implementation issues. We would like to verify the consistency and correctness of our proposed representation methodology by using the prototype application model, which is applied to design work of ship compartmentation model. For this purpose we have developed the "OO_COMDEF"(which means the Object-Oriented System for the Compartmentation Definition of ship) program that is applied to the compartmentation model which can be considered as a submodel of the general ship models. The results of research work have been proved that the representation methodology for the ship model based on the product model is an efficient and appropriate scheme for the ship model definitions. Consequently, this methodology can be proposed as a fundamental framework for the development of the shipbuilding CAD/CAM system.

• The KIPS Transactions:PartD
• /
• v.14D no.7
• /
• pp.773-782
• /
• 2007

Software produce line engineering is a method that prepares for future reuse and supports seamless reuse in the application development process. Analyzing the commonality and variability between products in a product line is one of the essential concerns that must be considered when building a product line. In this paper, we suggest to combine a product line engineering approach with RFID applications technology. More concretely, common activities are identified among the RFID-enable applications and the variability in the common activities is analyzed in detail. Then, we suggest reusable product line architecture as a product line asset. In addition, as a tool for supporting this research, a framework which provides both reusable product line architecture for REID applications and the components that implement concrete realization of the architecture is developed. Sharing a common architecture and reusing assets to deploy recurrent services may be considered an advantage in terms of economic significance and overall quality.

• Resources Recycling
• /
• v.23 no.4
• /
• pp.37-46
• /
• 2014

Carbon dioxide generated from construction materials and construction material industry among the fields of construction is approximately 67 million tons. It is about 30% of the carbon dioxide generated in the fields of construction. In order to reduce carbon dioxide in the fields of construction, it is necessary to control the use of fossil fuel consumed and decrease carbon emission by reducing the secondary and tertiary curing generating carbon dioxide in construction material industry. Therefore, this study manufactured mortar by having cement as the Plain and substituting three binding materials up to 50% and then adopted different curing methods to analyze congelation and strength characteristics. Test results for strength property by changing binding materials showed that specimens with blast furnace slag, CSA 15% and CAMC 5% resulted in positive effect for strength.