• 한국안전학회지
• /
• 제16권2호
• /
• pp.91-96
• /
• 2001

Theoretical definitions of mixed behavior of PE panel and connote should have preceded to cause a mixed behavior of connote and polyethylene which have different elastic module, one-line expansion coefficients, poison ratios, compressive strengths and tensile strengths. Consequently, changes are analyzed through experiment process to identify the effects on interpretation of mixed behavior on the basis of temperature change of structures, temperature rise of concrete other than PE panel due to hydration heat temperature rise of concrete other than PE panel due to drying and contraction, working of hydrostatic pressure by storage and temperature gradient From the results of interpretation of the analysis, it is concluded that PE panel have slight influences on the change of guess of structures and maintains structural stability compared with concrete structures without PE panel.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.55-56
• /
• 2016

In the recent concrete industry, when producing recycled aggregates, waste concrete powder is by-produced in large quantities; however, since it is not used properly but buried or discarded. This study is to apply the waste concrete powder to a cement extruding panel as filler. Flexural strength and microstructure characteristics of panel is tested in order to improve the economics of the extruding panel. As a results of this study, it was found that extruding panel replacing silica(No.8) as the waste concrete powder totally showed little difference in the strength and satisfied the target flexural strength of 14MPa, comparing with controlled panel. In addition, we can understand that rich Portlandite and Calcite contributed to develop the strength in all curing conditions from XRD pattern.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 봄 학술발표회 논문집
• /
• pp.95-98
• /
• 1992

In large panel structures, the design of joints which interconnect panels, is important deciding the load-bearing capacity of structures. Being various factors in the design of joints, it is difficult to develop a the critical system for the structural analysis of large concrete panel structures. Therefore there is a tendency to depend on the experiment. The purpose of this paper is to investigate the strength and the mechanical behavior of vertical joints in large concrete panel structures.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권3호
• /
• pp.253-260
• /
• 1999

Main objective of this study is to examine the hysteretic behaviors and to evaluate the capacity of precast concrete (PC) large panel structures simulated from the prototype of 15-story building, Two 1/2 scaled precast concrete wall specimens and one monolithic reinforced concrete specimen were designed and tested under the cyclic loading conditions. The main parameter of test specimens in PC large panel structure is the type of details for vertical continuity of vertical steel in horizontal joint. Also the behaviors of PC large panel structures are compared with that of monolithic reinforcement concrete wall structure. From the results, the stiffness and energy dissipation ratio of the precast concrete specimens are shown little bit lower than those of monolithic reinforced concrete specimen. In the PC large panel structures, the specimen connected vertically by welding (strong connection) showed higher strength than that of the specimen connected vertically by joint box. However the failure pattern of the former showed more brittle than that of the latter due to the diagonal compressive failure of wall panels.

• 대한건축학회논문집:구조계
• /
• 제35권10호
• /
• pp.155-162
• /
• 2019

Hybrid precast concrete panel is a wall element that is able to quickly construct the core wall structure for moderate-rise modular buildings. Hybrid precast concrete panel has unique characteristics which is a pair of C-shaped steel beams combined at the top and bottom of a concrete wall, In this study, an improved anchorage detail for vertical rebar is proposed to ensure the lateral force resistance performance of hybrid precast concrete panel emulating monolithic concrete wall. Also, the structural performance of horizontal connection is investigated experimentally with the bolt spacing parameter. And the behavior of hybrid precast concrete panel with the improved detail is compared with the monolithic concrete wall tested in a previous study. Finally, the required thickness of C-shaped steel beam to eliminate or minimize the deformation in horizontal connection is calculated by prying action equation.

• 한국도로학회논문집
• /
• 제16권3호
• /
• pp.1-8
• /
• 2014

PURPOSES : The purpose of this paper is to demonstrate to the practicing engineers, how to apply the advanced composite materials theory to the road structures. For general construction material used, there is certain theoretical limit in sizes. For super road structure construction, the reduction in panel weight is the first step to take in order to break such size limits. METHODS : For a typical road structures panel, both concrete and advanced composite sandwich panels are considered. The concrete panel is treated as a special orthotropic plate. RESULTS : All types of advanced composite sandwich panels are considered as a self-weights less than one tenth of that of concrete panel. The concrete panel is treated as a special orthotropic plate to obtain more accurate result. CONCLUSIONS : Advanced composite sandwich panels are considered as a self-weights less than one tenth (10%) of that of concrete panel, with deflections less than that of the concrete panel. This conclusion gives good guide line for design of the light weight of road structures.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 봄 학술발표회 논문집
• /
• pp.148-153
• /
• 1993

The paper presents the results of shaking table test conducted on the 1/3.3 scaled large concrete panel model. The behaviors of large concrete panel structures subjected to seismic excitations are controlled by capacity of horizontal and vertical joints. To Study the seismic capacity of the large concrete panel structures, experimental researches for joints and structural assemblage are needed. Especially, since the magnitude of seismic loads are depended on the variation of time, period and accelerations, dynamic test is needed for estimating the seismic resistance of large concrete panel structures. The objective of this paper is to study the behaviors of large concrete panel structures on seismic excitations and to estimate the safety. Test results are as follows : 1) Test model was critically damaged in the first floor horizontal joint by rocking. 2) Elastic limit(0.12kg) of test model was 5times higher than that of korean seismic design code. 3) Maxium base shear of test model at the ground acceleration of 0.12g was 3.5 times higher than the result of equivalent static analysis. 4) Damping ratio of test model turned out 3.9~5.3% and the period at 0.12g was 0.065sec.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.49-52
• /
• 2006

Extrusion concrete panel is made by extrusion of high viscosity paste. The high viscosity paste is made by mix of cement, silica, reinforced fiber and thickening agent in the dry mixer and wet mixer subsequently, extrusion in the extruder, and curing in the normal steam curer and high pressure steam curer subsequently. To increase a flexural strength of the panel, it is used inorganic fiber as like asbestos. But it was known that the asbestos was harmful to human being lately, in the domestic area it is restricted usage in the construction materials. So, it is demanded the alternative material for asbestos in the extrusion concrete panel. This study is to investigate that the sepiolite is possible to be the alternative of asbestos. The 3 types of sepiolite is applied to the extrusion concrete panel. To investigate the properties of the panel with sepiolite, it is compared the control with asbestos in the flexural strength, the specific density and the spot compressive strength. From the test results, it was found that the panel with sepiolite B is higher than the control with asbestos in the flexural strength and in the density.

• 한국건설순환자원학회논문집
• /
• 제8권3호
• /
• pp.269-275
• /
• 2020

본 연구에서는 초고성능 콘크리트를 적용한 경량 프리캐스트 패널 개발의 일환으로 단면 두께와 철근 배근 유무에 따른 패널의 휨 재하 실험을 수행하였다. 일반 콘크리트 패널 1개와 초고성능 콘크리트를 사용한 경량 프리캐스트 패널 3개로서 총 4개의 패널을 제작하였다. 초고성능 콘크리트를 사용하고 철근을 보강하지 않은 패널은 단면 크기와 상관없이 일반 콘크리트 패널에 비해 휨 성능이 저하되는 것으로 나타났다. 초고성능 콘크리트를 적용한 속빈 단면에 콘크리트 양을 감소시킨 패널은 일반 콘크리트 패널에 비해 휨 성능이 150% 향상되었다. 이는 초고성능 콘크리트를 사용한 프리캐스트 패널의 단면 최적화 설계를 통해 더욱 경량화가 가능할 것으로 판단된다. 초고성능 콘크리트를 사용한 경량 프리캐스트 패널을 실제 구조물에 적용하기 위해서는 전단 성능과 연결 상세에 대한 추가 검토가 필요할 것으로 판단된다.

• 콘크리트학회논문집
• /
• 제28권5호
• /
• pp.545-553
• /
• 2016

이 논문에는 교량바닥판의 지간장이 짧은 단지간용 프리캐스트 콘크리트패널에 대해 수행한 정적하중 재하실험 결과들을 나타내었다. 단지간용 콘크리트패널은 콘크리트패널 하면에 콘크리트리브가 부착되어 있으며, 기존 LB-DECK과 달리 콘크리트패널 상면에 Top bar가 없는 단면이다. 콘크리트패널에 부착되는 콘크리트리브의 개수와 단면 상세는 교량바닥판의 지간장과 철근콘크리트바닥판 두께 변화에 따른 설계하중에 대해 변수해석 결과를 토대로 결정하였다. 콘크리트패널 상면에는 현장타설되는 콘크리트와 합성거동을 위해 전단철근을 배치하였다. 변수해석을 통해 산정된 콘크리트패널이 설계하중에 대해 사용성과 안전성을 만족하는 가를 확인하기 위해 정적하중 재하실험을 수행하였다. 지간장 1.6 m인 단지간 콘크리트패널 실험체 3개 제작한 후 정적하중 재하하면서 각 실험체의 처짐, 균열, 그리고 최종 파괴양상을 살펴보았다. 설계하중이 작용할 때 각 실험체의 처짐, 균열하중, 그리고 균열폭을 토대로 사용성을 평가하였다. 또한 각 실험체의 최종 파괴양상과 극한강도를 토대로 계수설계하중에 대한 안전성을 평가하였다. 실험 결과 단지간용 콘크리트패널이 사용성과 안전성을 만족하는 것을 확인할 수 있었다. 추가적으로 단지간용 콘크리트패널을 적용할 수 있는 교량바닥판의 지간장 범위를 검토하였다.