• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.741-744
• /
• 2008

There are two ways to reduce cement content for a given quality level(strength, workability etc.) in concrete. First, reducing the required paste volume by varying the shape or the grading of aggregates. Secondly, holding the paste volume constant while replacing cement volume with mineral admixtures or mineral fillers. And It will also be proved that the required minimum paste volume is independent of the paste composition, provided the paste composition is in a reasonable range. In this study, therefore, we have an object to determine the required minimum paste volume for a given workability level. For this purpose, we tried the following experiments: vary the paste volume for the three different grading of aggregates and determine the minimum paste volume to achieve a certain level of workability with high-range water reducing admixture.

• Journal of the Korean Institute of Educational Facilities
• /
• v.26 no.4
• /
• pp.19-25
• /
• 2019

Concrete wedge anchor is one of structural components to transfer load of an object attached to a primary structure. Recently, as retrofitting concrete structure is becoming a main issue, mechanical capacity of the anchor should be secured enough. In spite of the structural safety of Cast-in-place anchor, Post-installed anchor is more widely used with ease of placement or change of construction method. However, the post-installed anchors domestically produced have excessive coefficient of variation over 15% of ultimate tensile strength, which yields deteriorated quality in tensile strength. In this research, tensile strength test of anchors, which have improved sleeve and header and produced by a domestic company, was conducted for two variables, concrete strength and effective embedment depth. As a result, enough coefficients of variations were secured in all specimens. Also, in comparison to foreign products, the domestic ones have equal or higher performance.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.192-200
• /
• 2017

With the acceleration of construction industrialization, the buildings that China has adopted the construction of industrialization technology are increasing day by day, and Precast Concrete (PC) Structure technology is one of the main technologies of construction industrialization. Compared with the traditional cast-in-place concrete structure, PC structure is more conducive to shorten the construction period, reduce the number of construction workers and the site construction waste. Nevertheless, PC structure improves the requirements of hoisting machinery in the construction site, and the lay-out and selection of hoisting machinery become an important factor influencing the construction cost. The paper regards the typical tower crane in China as the research object, and establishes the time optimization model for the lifting scheme. The influence of the different precast rate on the selection of the tower crane is analyzed. This paper obtains the time variation of the tower crane under different precast rate, provides a theoretical basis for the design of precast concrete structures under the influence of assembly construction, and lays the foundation for the selection of tower crane under the precast rate.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.777-780
• /
• 2008

There were some attempt to reuse water with sludge combinative water for ready mixed concrete. But recycling water consist of cement, aggregate and chemical admixture. So it caused deterioration of concrete. The object of this study was to search for recycling method of the recycling water sludge as mineral admixture. This experiment dealed with the effect of $2.5{\sim}12.5$% range of the recycling sludge which can be used for admixture binder(BFS, FA, BFS+FA) on properties of activated recycling water sludge for admixture of concrete. As a result, Although the slump levels reduced and air contents increased as sludge replacement levels increased, it didn't change highly. The compression strength of concrete slightly increased with an increasing amount of recycling water sludge replacement.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1243-1244
• /
• 2022

In recent years, the growing interest in off-site construction has led to factories scaling up their manufacturing and production processes in the construction sector. Consequently, continuous large-scale site monitoring in low-variability environments, such as prefabricated components production plants (precast concrete production), has gained increasing importance. Although many studies on computer vision-based site monitoring have been conducted, challenges for deploying this technology for large-scale field applications still remain. One of the issues is collecting and transmitting vast amounts of video data. Continuous site monitoring systems are based on real-time video data collection and analysis, which requires excessive computational resources and network traffic. In addition, it is difficult to integrate various object information with different sizes and scales into a single scene. Various sizes and types of objects (e.g., workers, heavy equipment, and materials) exist in a plant production environment, and these objects should be detected simultaneously for effective site monitoring. However, with the existing object detection algorithms, it is difficult to simultaneously detect objects with significant differences in size because collecting and training massive amounts of object image data with various scales is necessary. This study thus developed a large-scale site monitoring system using edge computing and a small-object detection system to solve these problems. Edge computing is a distributed information technology architecture wherein the image or video data is processed near the originating source, not on a centralized server or cloud. By inferring information from the AI computing module equipped with CCTVs and communicating only the processed information with the server, it is possible to reduce excessive network traffic. Small-object detection is an innovative method to detect different-sized objects by cropping the raw image and setting the appropriate number of rows and columns for image splitting based on the target object size. This enables the detection of small objects from cropped and magnified images. The detected small objects can then be expressed in the original image. In the inference process, this study used the YOLO-v5 algorithm, known for its fast processing speed and widely used for real-time object detection. This method could effectively detect large and even small objects that were difficult to detect with the existing object detection algorithms. When the large-scale site monitoring system was tested, it performed well in detecting small objects, such as workers in a large-scale view of construction sites, which were inaccurately detected by the existing algorithms. Our next goal is to incorporate various safety monitoring and risk analysis algorithms into this system, such as collision risk estimation, based on the time-to-collision concept, enabling the optimization of safety routes by accumulating workers' paths and inferring the risky areas based on workers' trajectory patterns. Through such developments, this continuous large-scale site monitoring system can guide a construction plant's safety management system more effectively.

• Journal of The Korean Association of Information Education
• /
• v.12 no.4
• /
• pp.395-404
• /
• 2008

The shape learning of elementary mathematics should required a variety of activities to help student based on intuitive understanding. Learning three-dimensional shapes, it is effectively take advantage of actual object, but difficult to check a development figure or various forms of actual object, it is effectively utilizing computers semi-actual object. In addition, the computer to take advantage of even after school resources, the limits of learning something concrete to take advantage complement. This research developed the three-dimensional shapes application of elementary students shape learning to use of Flex and Flash. This application to take advantage of the free observation and causing an interesting and effective learning.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.291-294
• /
• 2001

This Current research for software architecture views and models a software system as a set of components and connectors. Components are ions of system level computational entities, connectors are ions of component interrelationships. In his paper, we focus attention on connectors for the Java Beans-based systems that are built using object integration technologies like CORBA. We present connector model in lava Beans-based system for object-oriented component integration. We start with a discussion of related work of software architecture research and of Object-Oriented modeling that focuses on the description of component collaborations. We propose connectors as transferable ions of system level component interconnection and inter-operation. Connectors are architectural ions of component coordination in the architecture of a system only. Connectors describe a collaboration rationale for component adaptations, which are then modeled in the concrete architecture of a system.

• Journal of KIISE:Software and Applications
• /
• v.26 no.10
• /
• pp.1167-1167
• /
• 1999

Although spatial databases support an efficient spatial management on objects in the real world, they have a characteristic that process only spatial information valid at current time, So in case of change in the spatial domain, it is very hard to support an efficient historical management for time-varying spatial information because they delete an old value and then replace with new value that is valid at current time. To solve these problems, there are rapidly increasing of interest for spatiotemporal databases, which serve historical functions for spatial information as well as spatial management functions for an object. However most of them presented in an abstract time-varying spatial phenomenon, but have not presented a concrete policy in spatiotemporal databases. In this paper, we propose a spatiotemporal data model that supports bitemporal time concepts in three dimensional architecture. In the proposed model, not only data types and their operation for object of spatiotemporal databases have been classified, but also mathematical expressions using formal semantics for them have been given. Then, the data structures and their operations based on relational database model as well as object-oriented database model are presented.

• Journal of KIISE
• /
• v.44 no.5
• /
• pp.510-521
• /
• 2017

The software development process (SDP) plays an important basic role in software engineering education. Every software is developed in accordance with a specific SDP which contains all phases of software development. SDP education helps students to understand the overall techniques and the process of software engineering. This paper introduces a software development methodology (i.e., process) - 'OOPT (Object Oriented Process with Traceability),' which was proposed for use in university software engineering classes. The OOPT is based on object-oriented software development, and it defines concrete requirements as well as outputs of each process/phases. It also contains the unit/system testing and a traceability analysis. We have used the OOPT in software engineering classes at Konkuk university for eight years. This paper conveys our experience as well as future extension and improvement plans.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.5
• /
• pp.595-610
• /
• 1999

This paper presents a visual simulation tool for verification and validation(V&V) of design implications of the Object Behavior Chart developed in accordance with the existing real-time object's behavior design method. This tool can simulates the dynamic interactions using the executable simulation machine, that is EFSM(Extended Finite State Machine) and can detect various logical and temporal errors in the visual object behavior charts before a concrete implementation is made. For this, a LOTOS prototype specification is automatically generated from the visual Object Behavior Chart, and is translated into an EFSM. This system is implemented in Visual C++ version 4.2 and currently runs on PC Windows 95 environment. For simulation purpose, LOTOS was chosen because of it's excellence in specifying communication protocols. Our research contributes to the support tools for seamlessly integrating methodology-based graphical models and formal-based simulation techniques, and also contributes to the automated V&V of the Visual Models.