• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.259-265
• /
• 2000

This study is a fundamental research for recycling waste vinyl in asphalt concrete mixture for roadway pavement. The mixing method and proper content of waste polyethylene(PE) film were determined through preliminary mix design. This study was performed mix designs using 2 type graduations of aggregate and used two types waste PE film. The asphalt concrete mixture was satisfied with the specification of the Ministry of Construction and Transportation. Its showed that dense grade asphalt concrete mixture containing waste vinyl were higher performance in comparision to other mixtures(common dense grade mixture and gap grade mixtures). From results of this study, it was confirmed that addition of waste vinyl improved on quality of asphalt concrete mixture.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.385-390
• /
• 1997

In the mixing proportion of high flowing concrete we have to use quantity of power such as cement and superplasticizer, and increase the proportion of fine aggregate more than that of plain concrete to increase flowability and segregation resistance. Therefore, the fresh state of high flowing concrete is largely affected by superplasticizer and change of grade the percentage of surface water. This study aims at development of self-filling up high flowing concrete without compaction, in case of using the fine aggregate of standard grade range, by examination on the influence of fresh state of high flowing concrete, and by understanding influence on various fluidity such as flowability, reinforcement passibility, fillingability, segregation resistance.

• 한국안전학회지
• /
• 제29권6호
• /
• pp.87-93
• /
• 2014

In this study, the reinforced concrete rahmen bridge damaged by the chloride attack was investigated. According to the investigation, the degraded concretes on cantilever kerb and end part were intensively observed. Thus, the chloride content test and half-cell method were performed to evaluate the degraded parts. As a result, the contents of chloride on degraded parts were C and D grade. On the other hand, the half-cell potential values of rebar in degraded concrete were measured with the minor corrosion. This rebar corrosion is expected to progressing. Chloride content D grade is due to expansion pressure by corrosion of rebar and freeze-thaw by permeate water, could see progresses rapidly degradation. In order to prevent chloride attack to concrete deck caused by deicing salts, corresponding to the chloride critical concentration must maintain grade b or at least grade c. Chloride condition evaluation standard apply to evaluation of marine structure chloride attack with chloride attack by deicing salts.

• Advances in concrete construction
• /
• 제10권6호
• /
• pp.547-557
• /
• 2020

This paper presents one of the demonstration projects undertaken during the FP7 EU-funded Anagennisi project (Innovative reuse of all tyre components in concrete-2014-2017) on a full-scale (30 m×40 m, thickness: 0.2 m) Steel Fibre Reinforced Concrete (SFRC) slab-on-grade using a blend of manufactured steel fibres (MSF) and Recycled Tyre Steel Fibres (RTSF). The aim of the project was to assess the use of RTSF in everyday construction practice. The Anagennisi partners, Dulex Ltd in collaboration with Gradmont-Gradacac Ltd and University of Zagreb, designed, cast and monitored the long-term shrinkage deformations of the indoor slab-on-grade slab at Gradmont's precast concrete factory in Gradacac, Bosnia and Herzegovina. A hybrid RTSF mix (20 kg/㎥ of MSF+10 kg/㎥ of RTSF) was used to comply with the design criteria which included a maximum load capacity of 20 kN/㎡. The slab was monitored for one year using surveying equipment and visual inspection of cracks. During the monitoring period, the slab exhibited reasonable deformations (a maximum displacement of 3.3 mm for both, horizontal and vertical displacements) whilst after five years in use, the owners did not report any issues and were satisfied with the construction methodology and materials used. This work confirms that RSTF is a viable and sustainable solution for slab-on-grade applications.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권4호
• /
• pp.96-102
• /
• 2019

고분말도 슬래그를 사용할 경우 초기재령에서의 강도발현은 우수하나 수화열 및 품질관리에 따른 문제가 발생하기 쉽다. 본 연구에서는 3000급 저분말도의 고로슬래그 미분말을 혼입한 콘크리트의 강도특성 및 내구특성을 분석하였다. 작업성을 기준으로 3가지 배합을 고려하였으며, 압축강도와 내구특성시험이 수행되었다. 강도특성 결과 3000급 슬래그를 혼입한 콘크리트는 28일 재령에서 OPC(Ordinary Portland Cement) 배합 대비 강도가 떨어지지만 장기재령에서는 잠재수경성의 촉진으로 인하여 큰 차이가 나타나지 않았다. 탄산화 및 동결융해 실험에서는 4200급 슬래그 배합 대비 약간 우수한 저항성능이 나타났는데, 이는 동일 슬럼프를 목표로 배합을 진행하여 3000급 슬래그 배합에 단위수량을 적게 고려하였기 때문이다. 장기재령의 경우, 3000급 슬래그 배합의 염화물확산계수는 OPC 배합 대비20% 수준으로 감소하여 우수한 내염해특성이 평가되었다. 단위수량을 조정하고 3000급 저분말도의 고로슬래그 미분말을 혼입하여 사용할 경우, 기존 분말도의 슬래그가 사용된 콘크리트 및 OPC 콘크리트와 비교시 우수한 작업성능과 내구특성을 확보할 수 있을 것으로 판단된다.

• 콘크리트학회논문집
• /
• 제12권1호
• /
• pp.45-52
• /
• 2000

The quality of cement mortar products largely depends on various work conditions, specially on the grading and grade shape of aggregates. However, the effect of grading and grade shape on the quality is not considered by both KS codes and production processes, resulting in the increase of the possibility of quality degradation. The objective of this study was to investigate the effect of grading and grade shape on the strength and absorption characteristics of cement mortar products. Flexural and compressive strength increased with the increase of fineness modulus and W/C. The strength increase was measured larger with river sand than with crushed sand. Absorption tended to decrease with the increase of fineness modulus and W/C, but did not affected by the source of sand.

• 한국건설순환자원학회논문집
• /
• 제8권1호
• /
• pp.1-7
• /
• 2020

고로슬래그 미분말은 뛰어난 장기 강도와 염해 저항성 등을 바탕으로 활발히 사용되는 혼화재들 중 하나이다. 국내 규격(KSF 2563)은 저분말도 GGBFS를 가지고 있는 일본 및 영국의 규격과는 다르게 3종의 GGBFS가 모두 고분말도에 포함된다. 본 연구에서는 4,000급 고로슬래그 미분말와 플라이애시를 혼입한 수화열 저감용 삼성분계 배합과 3,000급 GGBFS를 혼입한 배합의 굳지 않은 콘크리트 특성, 압축 강도, 수축 특성을 분석하였다. 수화열 저감용 삼성분계 배합과 저분말도 고로슬래그 미분말을 혼입한 배합 간에 공기량과 슬럼프는 동일한 값을 나타내었으며 초결 및 종결 시간의 경우 20분 내외의 결과를 나타내어 큰 차이가 나타나지 않았다. 압축 강도와 수축 특성 분석에서 삼성분계 배합은 저분말도 GGBFS를 혼입한 배합보다 더 낮은 장기 강도와 높은 수축량을 나타내었다.

• Structural Engineering and Mechanics
• /
• 제12권5호
• /
• pp.459-474
• /
• 2001

The complete moment-curvature curves of doubly reinforced concrete beams made of normal- or high-strength concrete have been evaluated using a newly developed analytical method that takes into account the stress-path dependence of the constitutive properties of the materials. From the moment-curvature curves and the strain distribution results obtained, the post-peak behavior and flexural ductility of doubly reinforced normal- and high-strength concrete beam sections are studied. It is found that the major factors affecting the flexural ductility of reinforced concrete beam sections are the tension steel ratio, compression steel ratio and concrete grade. Generally, the flexural ductility decreases as the amount of tension reinforcement increases, but increases as the amount of compression reinforcement increases. However, the effect of the concrete grade on flexural ductility is fairly complicated, as will be explained in the paper. Quantitative analysis of such effects has been carried out and a formula for direct evaluation of the flexural ductility of doubly reinforced concrete sections developed. The formula should be useful for the ductility design of doubly reinforced normal- and high-strength concrete beams.

• 콘크리트학회지
• /
• 제18권5호
• /
• pp.10-13
• /
• 2006

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.73-74
• /
• 2017

Below-grade concrete structure in residential buildings are exposed to various cracking conditions in between installation, construction and usage. Leakage follows the cracks along the exterior wall and floor slabs, and leakage occurring in this conditioning brings about discomfort to the users inside the building. This study analyzes a survey on the causes of leakage in below-grade concrete structure and proposes a solution method.