• Biomolecules & Therapeutics
• /
• 제13권1호
• /
• pp.41-47
• /
• 2005

The study was conducted to determine whether oak wood vinegar extract influences blood alcohol concentration and hangover syndrome in healthy volunteers. 2% wood vinegar extract was effective to inhibit increase of blood alcohol concentration after alcohol intake and showed significantly different (P<0.1) compared to placebo. By result of questionnaire of volunteers, wood vinegar extract showed effects improving hangover syndrome. In comparative study about blood alcohol concentration and hangover syndrome of wood vinegar extract and other extract that hangover improvement effect was reported, average maximum blood alcohol concentration was lowered in those taking wood vinegar extract than those taking other extract. At drinking completion 210minutes (T210), blood alcohol concentration of those taking wood vinegar extract was the lowest by 0.063% compared with other extract but was not significantly different between in those taking wood vinegar extract and in those taking other extract. However, wood vinegar extract's experimental group was the highest by 0.462 in decrement rate of blood alcohol concentration and, when did P<0.1 by significance level, indicated difference that mean statistically compared to placebo group uniquely. At those taking wood vinegar extract, the improvement rate and the aggravation rate of hangover syndrome was each 87%, 2%. Thus it was concluded that wood vinegar extract showed excellent alcohol oxidation and was effective in hangover improvement.

• 한국재료학회지
• /
• 제19권3호
• /
• pp.174-178
• /
• 2009

The effects of post-CMP cleaning on the chemical and galvanic corrosion of copper (Cu) and titanium (Ti) were studied in patterned silicon (Si) wafers. First, variation of the corrosion rate was investigated as a function of the concentration of citric acid that was included in both the CMP slurry and the post-CMP solution. The open circuit potential (OCP) of Cu decreased as the citric acid concentration increased. In contrast with Cu, the OCP of titanium (Ti) increased as this concentration increased. The gap in the OCP between Cu and Ti increased as citric acid concentration increased, which increased the galvanic corrosion rate between Cu and Ti. The corrosion rates of Cu showed a linear relationship with the concentrations of citric acid. Second, the effect of Triton X-$100^{(R)}$, a nonionic surfactant, in a post-CMP solution on the electrochemical characteristics of the specimens was also investigated. The OCP of Cu decreased as the surfactant concentration increased. In contrast with Cu, the OCP of Ti increased greatly as this concentration increased. Given that Triton X-$100^{(R)}$ changes its micelle structure according to its concentration in the solution, the corrosion rate of each concentration was tested.

• 한국수정란이식학회지
• /
• 제10권3호
• /
• pp.251-256
• /
• 1995

This study was experimented that developmental effects of bovine in vitro fertilized embryos by coculture system and supplementation of energy materials into simple media. With the ovaries from slaughter house in vitro maturation by 24h, in vitro fertilization was performed with sperms collected by Percoll gradient method. Fertilized embryos were cocultured in 15% FCS+CZB medium with BOEC(bovine oviductal epithelial cell), GCM (granulosa cell monolayer) and MEFC(mouse embryonic fihrohlast cell). And also in this study, there was trying to improve the early developmental rate of embryos by addition of concentration-controlled Na-pyruvate, D-glucose which were used as energy sources into CZB medium. In vitro developmental rate was confirmed by the cleavage rate of 48h post-IVF and the embryo development rate at 240h culture. In the coculture system BOEC had 20.0% of blastocysts rate, which was higher than that of other coculture systems. To determine the optimum concentration for early embryo developmental rate rapidly, through the gradient of concentrations of Na-pyruvate and D-glucose, we focused on the cleavage rate at 48h and blastocysts rate at 240h. In case of Na-pyruvate, cleavage rate and developmental rate over 3-cell were lower at the concentration of 1.OOrnM than the other treatment concentrations, otherwise the blastocysts rate was higher as 23.2% than the others. That result showed that as like reported group which had higher develop-mental rate over 3-cell was also higher to the blastocysts rate. In case of D-glucose, there was no effects through the concentration changes. It was the result of this study for which the use of BOEC coculture system and 1.OOmM Na-pyruvate as an energy source had an effect upon embryo development.

• 한국수정란이식학회지
• /
• 제11권3호
• /
• pp.225-231
• /
• 1996

This study was conducted to investigate the effects of preincubation time, concentration and exposure time of sperm on in vitro fertilization of porcine follicular oocytes rnatured in in vitro. The results obtained are as follows ; 1. Effect of preincuhation time for porcine sperm capacitation on in vitro fertilization in medium with heparin was investigated. Normal fertilization rate was highest in 15 min(26.4%). However, there were no significant differences among preincuhation times of 5~90 min, 2. Normal fertilization rates of sperm concentrations were 17.0~26.5%, and normal fertilization rate from l$\times$ l05cell /ml concentration was also higher than those of other sperm concentration. 3. Normal fertilization rates of sperm exposure time of 4, 8, 12, 16 and 20 hours were 6.1, 20.8, 27.8, 25.0 and 26.7%, respectively. Normal fertilization rate from sperm exposure time of 12 hours was also higher than that of other sperm exposure times.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.71-76
• /
• 2012

The coflow velocity effect on the minimum extinguishing concentration(MEC) was investigated experimentally in heptane cup-burner flames. Various inert gases($N_2$, Ar, $CO_2$, He) were added into the oxidizer to find the critical concentration and the effectiveness of the agents on flame extinction. The experimental results showed that the MECs were increased with increasing coflow velocity for most inert gases except helium, but the higher coflow velocity induced the lower burning rates of heptane. This indicated that the increase of coflow velocity resulted in the decrease of fuel velocity evaporated from fuel surface, and hence the stain rate on the reaction zone was also decreased. In the case of helium as a additive, the extinguishing concentration was independent of the coflow velocity because the heat conductivity was ten times larger than the other inert gases and flow effect by a strain rate might be compensated for heat loss to the surroundings.

• 상하수도학회지
• /
• 제19권1호
• /
• pp.68-77
• /
• 2005

This study was performed to evaluate the application of corrosion inhibitor and to examine the correlation between corrosion rate and red water in a series of batch tests and a test using auto corrosion monitoring system at A water treatment plant in Gyeonggido. The corrosion study in the auto corrosion monitoring system indicated that Fe concentration decreased by 30~50% and corrosion rate also reduced remarkably with corrosion inhibitor at $1.8mg\;PO_4/L$. After addition of corrosion inhibitor, it was indicated the effective adsorption of the inhibitor on the surface of the pipe line forming a protective film. The corrosion rate increases with the increase in Fe concentration. With $1.8mg\;PO_4/L$ of corrosion inhibitor, the corrosion rate decreased remarkably. Fe concentration had correlation to not only red water problems but also the corrosion rate that actually dissolved into the water, primarily due to the deposition of oxidized iron or other compounds as a scale, which serves as a large reservoir of corrosion by-product. Therefore, corrosion rate can be estimated by Fe concentration. For these reasons, an effective corrosion inhibitor is also an effective red water control reagent. The effect of the corrosion inhibition can last for some time even the application the corrosion inhibitor is discontinued. For the cost effective and efficient corrosion control, the concentration and timing of corrosion inhibitor addition must be determined properly.

• The Korean Journal of Ecology
• /
• 제26권6호
• /
• pp.313-319
• /
• 2003

Dry weight loss and nutrient release from leaf litter for six tree species were studied using litter bag methods. The litter bags were incubated for f6 months on the forest floor in temperate deciduous forest in Mt. Cheonma, located at the middle part of Korean Peninsula. The changes in nutrient content and the rate of dry weight loss in leaf litter varied with litter types. The litter of Pinus densiflora showed the lowest rate of mass loss (k=0.33), nitrogen concentration (0.89%) and ash concentration (2.50%), while showed the highest C/N ratio (63.40). On the other hand, the litter of Acer pseudo-sieboldianum showed the fastest rate of mass loss (k=0.82), the highest nitrogen concentration (1.11%), and the lowest C/N ratio (49.40). During the decomposition, nitrogen, phosphorus and calcium in the leaf litters showed relatively slow decreasing pattern compared to other elements (carbon, potassium, magnesium, manganese and sodium), but potassium and sodium decreased at early stage of the decomposition for all leaf litters. Differences in annual decomposition rates of litter among species were consistent with the particular chemical characteristics of their leaf litters. The initial concentration of nitrogen was positively correlated with litter decomposition rate for six species, while litter decomposition rate of six species was negatively correlated with C:N ratio of initial leaf litters.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.21-26
• /
• 2005

We performed the numerical analysis on the characteristics of indoor air quality and local supply index with a variation of supply · exhaust airflow rate. We analyzed the local supply index and carbon dioxide concentration at the room and breathing zone with respect to the variation of the supply · exhaust airflow rate. From the numerical results, we found that local supply index was affected but carbon dioxide concentration was hardly affected by the variation of the airflow rate in the room. And we also knew that carbon dioxide concentration was raised in despite of the increment of the supply airflow rate in the breathing zone. After this study it is necessary to analyze the local exhaust index when we evaluate the state of the ventilation in the room.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1493-1495
• /
• 1994

Study on the effect of hydrogen flow rate and $CH_4$ concentration in deposition of the diamond thin films by MWPECVD diamond thin films were deposited on Si substrate from $CH_4-H_2-O_2$ system by MWPE CVD, and identified by SEM, XRD and Raman spectroscopy. The flow rate of hydrogen didn't affect the surface morphology and crystallity of diamond thin films, but did slightly affect growth rate. When the concentration of oxygen was fixed at 40%, the growth rate and crystallity of diamond thin films were gradually improved according to increasment of concentration of $CH_4$ but growth rate of the thin films showed peak at 7% and the crystallity showed peak at 6%.

• 도시과학
• /
• 제8권2호
• /
• pp.29-34
• /
• 2019

Benzene pollution is becoming increasingly serious, and the treatment technology of benzene has attracted much attention. In this paper, a self-made photocatalytic reactor was used to explore the removal rate of benzene under the ultraviolet light with the wavelength of 253.7nm. The results showed that the degradation rate of benzene decreased from 64.29% to 16.26% when the concentration increased from 43mg/㎥ to 256mg/㎥ under the condition of 28W UV light intensity and 50s residence time. Under the condition of 28W UV light intensity and 103mg/㎥ concentration, the residence time increased from 16.5s to 50s, and the benzene removal rate increased from 13.23% to 42.72%.Under the condition of benzene concentration 103mg/㎥ and residence time of 50s, the removal rate of benzene increased from 29.34% to 52.58% in the process of UV light intensity rising from 28W to 48W.It is concluded that decreasing the concentration and increasing the residence time of gas were beneficial to the removal of benzene and increasing the light intensity can improve the removal rate of benzene.