• Atmosphere
• /
• v.34 no.3
• /
• pp.233-255
• /
• 2024

This study analyzed the distribution of Aerosol Robotic Network (AERONET) Version 3 Level 2.0 data, spanning over two decades, across South Korea and its six administrative regions (Seoul metropolitan area, Chungcheong, Jeolla, Gangwon, Gyeongsang, and Jeju). The research assessed long-term trends in aerosol optical depth (AOD) and mass concentration of particulate matter (i.e., PM₁₀ and PM_2.5), using data from the AERONET direct sun product and AirKorea, respectively. Additionally, eight aerosol types were identified using the scattering Ångström exponent and absorption Ångström exponent from the AERONET inversion product. The study further explored their domestic and regional distributions. Findings indicated that AERONET data were predominantly concentrated in the western regions of South Korea, including the Seoul metropolitan area, Chungcheong, and Jeolla, with a higher frequency of data in spring, thus demonstrating spatial and temporal heterogeneity. The annual average AOD exhibited a declining trend of -0.006 yr^-1. Similarly, PM₁₀ and PM_2.5 mass concentrations decreased by -1.324 ㎍ m^-3 yr^-1 and -1.335 ㎍ m^-3 yr^-1, respectively. These trends in AOD and PM₁₀ (PM_2.5) demonstrated positive correlations, with correlation coefficients of 0.674 (0.753) and statistically significant low p-values of 0.00058 (0.03), respectively. The analysis also revealed that aerosols in South Korea predominantly consisted of black carbon (BC) or BC-mixed types (84.09%), with a notable presence of smaller, less absorbent aerosol types (13.11%).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.4
• /
• pp.339-344
• /
• 2010

Oxygen depleted water mass can damage aquatic animals not only in direct way but also in indirect way by generating toxic substances including occurrence of hydrogen sulfide and ammonia which are also highly detrimental to animal life in the water mass. An oxygen dissolution device was developed, which makes turnover of the oxygen rich (over 20 mg/L) surface water down to the bottom where hypoxia is evident and tested the device in terms of oxygen recovery in the oxygen depleted bottom water. the device with turnover rates of $3.6\;m^2$/min at the liquid oxygen injection rate of 48~26.3 L/min could recover dissolved oxygen level to 7~25 mg/L at depth 7 m to lead to the dissolution level of over 90% by the supply of liquid oxygen. The running advantage of the device is that it does not require any auxiliary tank and higher energy for operation. Therefore, it can be highly useful device to relieve damages to the farmed animals in the oxygen depleted waters.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.28.2-28.2
• /
• 2015

High redshift quasars (z > 5) hold keys to understanding the evolution of the universe in its early stage. Yet, the number of high redshift quasars uncovered from previous studies is relatively small (70 or so), and are concentrated mostly in a limited redshift range (z ~ 6). To understand the early mass growth of supermassive black holes and the final stage of the cosmic reionization, it is important to find a statistically meaningful sample of quasars with various physical properties. Here we present a survey for high redshift quasars at 5 < z < 7. Through color selection techniques using multi-wavelength data, we found quasar candidates and carried out imaging follow-up observations to reduce contaminants. After optical spectroscopy, we discovered eight new quasars. We obtained near-infrared spectra for 3 of these 8 quasars, measured their physical properties such as black hole masses and Eddington ratios, and found that the high redshift quasars we discovered are growing via accretion more vigorous than those of their lower redshift counterparts. We estimated the quasar number densities from our discoveries and compared them to those expected from the quasar luminosity functions in literature. In contrast to the observed number density of quasars at z ~ 5, which agrees with literature, the observed number density at z ~ 7 shows values lower than what is expected, even after considering an extrapolated number density evolution. We conclude that the quasar number density at z ~ 7 declines toward higher redshift, more steeply than the empirically expected evolution.

• Food Science and Biotechnology
• /
• v.17 no.5
• /
• pp.1032-1037
• /
• 2008

Lowly volatile heterocyclic sulfur compounds generated in autoclaved garlic extract were isolated and identified, and their antimicrobial activity was determined. Two kinds of unusual volatile sulfur compounds were separated from heated garlic by preparative recycling high performance liquid chromatography (HPLC), and identified by gas chromatography (GC)-mass spectrometry (MS) and $^1H$-nuclear magnetic resonance (NMR). They had heterocyclic structures with 4 to 5 sulfur atoms in the molecules. 4-Methyl-1,2,3-trithiolane (MTTT) is highly volatile and was not able to be concentrated, and was identified by GCMS only. MTTT and 6-methyl-1,2,3,4,5-pentathiepane (MPTP) are lowly volatile and were obtained in pure states to be positively identified for the first time. All 3 heterocyclic sulfur compounds began to appear by the time when the early-formed diallyl sulfides started to disappear. The minimum inhibitory concentration range of MTTT and MPTP was determined to be between 1 and 6 ppm against all yeasts tested. MTTT and MPTP were lowly volatile and sparingly soluble in water.

• Korean Journal of Food Science and Technology
• /
• v.36 no.4
• /
• pp.643-647
• /
• 2004

Natural antimicrobial substance from peanut (Arachis hypogaea) shells was isolated and structurally elucidated. Peanut shells were extracted with methanol (MeOH) and concentrated in vacuo, MeOH extract was solvent-fractionated with ethyl acetate (EtOAc) and various buffer to obtain EtOAc acidic, neutral, and phenolic fractions. EtOAc neutral fraction, which showed antimicrobial activity, was purified through silica gel adsorption column, Sephadex LH-20 column, ODS column, and high performance liquid chromatographies, and its active substance was isolated and identified as pratensein (3',5,7-trihydroxy-4'-methoxyisoflavone) by spectroscopic methods of proton-nuclear magnetic resonance, mass spectrometry, and nuclear overhauser enhancement spectroscopy.

• Journal of Korean Society on Water Environment
• /
• v.28 no.1
• /
• pp.109-114
• /
• 2012

In this study, both sedimentation and thickening experiments were conducted for residuals produced from an advanced water treatment plant for more accurate and practical design of residual treatment train. In order to design a backwashed residual sedimentation basin (SRSB) in the filter backwash water recycle system, two kinds of backwash waters, one from sand filter (SFBW) and the other from GAC adsorption bed (GACBW), were separately collected and their surface loading rate measured. In addition, in order to design a gravity thickener, batch thickening tests were conducted for concentrated residuals taken from sedimentation basin and their limiting solid flux ($SF_{L}$) measured. From the experimental results and consideration of the seasonal characteristics of the residual, surface loading rate of $70m^{3}/m^{2}{\cdot}d$ was proposed as a design parameter for SRSB and solid loading rate of 20 kg $TS/m^{2}{\cdot}d$ was proposed as a design parameter for gravity thickeners. Finally, the material mass-balance was made for the design of each unit process in the residual treatment train.

• Microbiology and Biotechnology Letters
• /
• v.46 no.3
• /
• pp.269-276
• /
• 2018

Rabies virus (RABV)-specific antibodies in animals and humans are measured using standard methods such as fluorescent antibody virus neutralization (FAVN) tests and rapid fluorescent focus inhibition tests, which are based on cell culture systems. An alternative assay that is safe and easy to perform is required for rapid sero-surveillance following mass vaccination of animals. Two purified monoclonal antibodies (4G36 and B2H17) against RABV were selected as capture and detection antibodies, respectively. A genetically modified RABV, the ERAGS strain, was propagated and concentrated by polyethylene glycol precipitation. Optimal conditions for the RABV antigen, antibodies, and serum dilution for a blocking enzymelinked immune sorbent assay (B-ELISA) were established. We evaluated the sensitivity, specificity, and accuracy of the B-ELISA using serum samples from 138 dogs, 71 raccoon dogs, and 25 cats. The B-ELISA showed a diagnostic sensitivity of 95.8-96.3%, specificity of 91.3-100%, and accuracy of 96.0-97.2% compared to the FAVN test. These results suggest that the B-ELISA is useful for sero-surveillance of RABV in dogs, raccoon dogs, and cats.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.5
• /
• pp.45-51
• /
• 2002

The characteristics of nonlinear seismic behavior and failure mechanism of RC space frame in railroad viaducts have been studied by the numerical analysis in time domain. The structure concerned is modeled in 3 dimensional extent and the RC frame elements consisting of fibers are employed for the columns. The fibers are characterized as RC zone and PC one to distinguish the different energy release after cracking resulted from the bond characteristic between concrete and re-bar. Due to the deviation of the mass center and the stiffness center of the entire structure the complex behavior is shown under seismic actions. The excessive shear force is concentrated on the column beside flexible one relatively, which leads to the failure of bridge concerned.

• Journal of Electrochemical Science and Technology
• /
• v.5 no.4
• /
• pp.115-127
• /
• 2014

Cd-Pb thin films were electrodeposited from a diluted chloride solution using stainless steel rotating disc electrode. The linear sweep voltammograms of the single metallic ions show that electrodeposition of these ions was mass transfer control due to the plateau observed for different rotations at concentration (50 and 200 ppm). The voltammograms of binary system elucidate that electrodeposition process always start at cathodic potential located between the potential of individual metals. Currents transients measurements, anodic linear sweep voltammetry (ALSV) and atomic force microscopy (AFM) were used to characterize the electrocryatalization process and morphology of thin films. ALSV profiles show a differentiation for the dissolution process of individual metals and binary system. Two peaks of dissolution Cd-Pb film were observed for the binary system with different metal ion concentration ratios. The model of Scharifker and Hills was used to analyze the current transients and it revealed that Cd-Pb electrocrystalization processes at low concentration is governed by three-dimensional progressive nucleation controlled by diffusion, while at higher concentration starts as a progressive nucleation then switch to instantaneous nucleation process. AFM images reveal that Cd-Pb film electrodeposited at low concentration is more roughness than Cd-Pb film electrodeposited at high concentrated solution.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.2
• /
• pp.298-309
• /
• 1990

In this paper, a new method is suggested to analyze impulsive stresses at loading poing of concentrated impact load under certain impact conditions determined by impact velocity, stiffness of plate and mass of impact body, etc. The impulsive stresses are analyzed by using the three dimensional dynamic theory of elasticity so as to analytically clarify the generation phenomenon of cone crack at the impact fracture of fragile materials (to be discussed if the second paper). The Lagrange's plate theory and Hertz's law of contact theory are used for the analysis of impact load, and the approximate equation of impact load is suggested to analyze the impulsive stresses at the impact point to decide the ranage of impact load factor. When impact load factors are over and under 0.263, approximate equations are suggested to be F(t)=Aexp(-Bt)sinCt and F(t)=Aexp(-bt) {1-exp(Ct)} respectively. Also, the inverse Laplace transformation is done by using the F.F.T.(fast fourier transform) algorithm. And in order to clarity the validity of stress analysis method, experiments on strain fluctuation at impact point are performed on a supported square glass plate. Finally, these analytical results are shown to be in close agreement with experimental results.