• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1715-1716
• /
• 2006

전력 계통에서 과전류가 발생하게 되면 이것을 차단하기 위해 차단기가 동작한다. 차단기가 동작하게 되면 기계적으로 전기의 흐름을 단절시키므로 아크 현상이 발생한다. 이때 차단기의 차단 절차를 이해하기 위해서는 아크 현상의 모델링이 필요하다. 특히 포스트 아크 현상에 관한 정밀한 모델링이 이루어질 경우 차단기에서의 소호 특성을 파악하기 용이하다. 우리는 이 논문에서 전력 계통의 과도현상 분석 수치해석 프로그램인 EMTP(Electro-Magnetic Transient Program)를 이용하여 아크 현상에서 발견되는 포스트 아크 전류(Post-Arc Current) 및 TRV(Transient Recovery Voltage)를 반영하는 아크 모델을 설계하였다.

• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.54-59
• /
• 2019

CNC(Computer Numerical Control) machine tools are being used in various industrial fields such as aircraft and automobiles. The machining conditions used in the mold industry are used, and the simulation and the experiment are compared. The tool used in the experiment was carried out to increase the reliability of the simulation of the cutting machining. The program used in the 3D-FEM (finite element method) was the AdvantEdge and predicted by down-milling. The tool model is used 3D-FEM simulation by using the cutting force, temperature prediction. In this study, we carried out the verification of cutting force by using a 3-axis tool dynamometer (Kistler 9257B) system when machining the plastic mold Steel machining of NAK-80. The cutting force experiment data using on the charge amplifier (5070A) is amplified, and the 3-axis cutting force data are saved as a TDMS file using the Lab-View based program using on NI-PXIe-1062Q. The machining condition 7 was the most similar to the simulation and the experimental results. The material properties of the NAK-80 material and the simulation trends reflected in the reverse design of the tool were derived similarly to the experimental results.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.2
• /
• pp.167-173
• /
• 2017

In this paper, the characterization of the vertical position of trapped charges in the charge-trap flash (CTF) memory is performed in the novel CTF memory cell with gate-all-around structure using technology computer-aided design (TCAD) simulation. In the CTF memories, injected charges are not stored in the conductive poly-crystalline silicon layer in the trapping layer such as silicon nitride. Thus, a reliable technique for exactly locating the trapped charges is required for making up an accurate macro-models for CTF memory cells. When a programming operation is performed initially, the injected charges are trapped near the interface between tunneling oxide and trapping nitride layers. However, as the program voltage gets higher and a larger threshold voltage shift is resulted, additional charges are trapped near the blocking oxide interface. Intrinsic properties of nitride including trap density and effective capture cross-sectional area substantially affect the position of charge centroid. By exactly locating the charge centroid from the charge distribution in programmed cells under various operation conditions, the relation between charge centroid and program operation condition is closely investigated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.18-25
• /
• 2016

Enhanced tubes are used widely in the evaporators of large tonnage compression-type refrigerators. The evaporators consist of tube bundles, and the refrigerant properties are dependent on the locations in the tube bundles. In particular, the saturation temperatures of low pressure refrigerants (R-11, R-123) are strongly dependent on the locations due to the saturation temperature-pressure curve characteristics. Therefore, for the proper design of evaporators, local property predictions of the refrigerants are necessary. In this study, a computer program that simulates the flooded refrigerant evaporators was developed. The program incorporated theoretical models to predict the refrigerant shell-side boiling heat transfer coefficients and pressure drops across the tube bundle. The program adopted an incremental iterative procedure to perform row-by-row calculations over the specified incremental tube lengths for each water-side pass. The program was used to simulate the flooded refrigerant evaporator of the "T" company operating with R-123, which yielded satisfactory results. The program was extended to predict the performance of the flooded refrigerant evaporator operating with R-11, R-123, and R-134a. The effects of bundle aspect ratio are investigated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.205-215
• /
• 1996

In this paper, the performance analysis of the vehicle with the Ravigneaux type automatic transmission has been carried out using information of engine and drivetrain. It is necessary to understand the overall system including engine, torque converter, clutch, planetary gears, and road load. The equations of motion are derived from dynamic model. The GUI computer simulation program has been developed to analyze the powertrain performance of the vehicle with the Ravigneaux type automatic transmission.

• Journal of the korean Society of Automotive Engineers
• /
• v.7 no.3
• /
• pp.74-82
• /
• 1985

Using single-zone heat release model and quasi-steady model, computer program for calculating the compression ignition engine cycle was composed. The properties in the cylinder were calculated in terms of crank angle and the effects of various operating conditions on rate of heat release and on engine performance were studied. The predicted values for the engine under consideration have shown good agreement with published data.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.161-166
• /
• 1999

Virtual Manufacturing System(VMS) is a computer model that represents the precise and whole structure of manufacturing systems and simulates their physical and logical behavior in operation. In this paper, a real time simulation for the virtual factory is proposed to integrate a process planning with scheduling under distributed environments. In order to communicate the information under distributed environments, we use a server/client concept using socket program and internet.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2001.11a
• /
• pp.173-180
• /
• 2001

Electric power facilities must have effective grounding to provide means to carry electric current into the earth under fault conditions and to prevent damage of equipment, Ignition, and electrocution of presonnel. nuts paper present an algorithm called the Pattern Search method for the optimal parameters selection of the grounding system. Computer simulation results used the CDEGS grounding analysis program verifying the effects of the grounding system design parameters obtained from this method show that the grounding systems are adequately designed.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.78-81
• /
• 2000

The backlight inverter used in a laptop computer is investigated in this paper. It has been difficult for the electromagnetic transformer in the inverter to have a high efficiency and compact profile. In this study the piezoelectric transformer(PT) is used to reduce the loss and volume compared to the standard electromagnetic transformer. Comparison with the experimental inverter with the PT has been shown to validated the simulation program using the equivalent circuit model of the PT. A simple dimming control circuit was experimentally demonstrated and shown to have broad control.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2001.11a
• /
• pp.17-22
• /
• 2001

This paper gave a review of form factor computations in the luminous flux transfer method and practical application of DiLaura's recently developed form factor computation. A systematic analysis of how the results of a contour integration solution differ from those of existing numeric solutions were undertaken with a developed computer simulation program. Various situations between sending and receiving surfaces were considered, including the facing, size, and distance between surfaces.