• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.328-328
• /
• 2007

Large area matrix-addressed image detectors are a recent technology for x-ray imaging with medical diagnostic and other applications. The imaging properties of x-ray pixel detectors depend on the quantum efficiency of x-rays, the generated signal of each x-ray photon and the distribution of the generated signal between pixels. In a phosphor coated detector the light signal is generated by electrons captured in the phosphor screen. In our study we simulated the lateral spread distributions for phosphor coupled detector by Monte Carlo simulations. Most simulations of such detectors simplify the setup by only taking the conversion layer into account neglecting behind. The Monte Carlo code MCNPX has been used to simulate the complete interaction and subsequent charge transport of x-ray radiation. This has allowed the analysis of charge sharing between pixel elements as an important limited factor of digital x-ray imaging system. The parameters are determined by lateral distribution of x-ray photons and x-ray induced electrons. The primary purpose of this study was to develop a design tool for the evaluation of geometry factor in the phosphor coupled optical imaging detector. In order to evaluate the spatial resolution for different phosphor material, phosphor geometry we have developed a simulation code. The developed code calculates the energy absorption and spatial distribution based on both the signal from the scintillating layer and the signal from direct detection of x-ray in the detector. We show that internal scattering contributes to the so-called spatial resolution drop of the image detector. Results from the simulation of spatial distribution in a phosphor pixel detector are presented. The spatial resolution can be increased by optimizing pixel size and phosphor thickness.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.2
• /
• pp.233-245
• /
• 2007

Previous finite element studies have shown that AASHTO Standard load distribution factor (LDF) equations appear to be conservative for longer spans and larger girder spacing, but too permissible for short spans and girder spacing. AASHTO LRFD specification defines the distribution factor equation for girder spacing, span length, slab thickness, and longitudinal stiffness. However, this equation requires an iterative procedure to correctly determine the LDF value due to an initially unknown longitudinal stiffness parameter. This study presents a simplified LDF equation for interior and exterior girders of two-span continuous I-girder bridges that does not require an iterative design procedure. The finite element method was used to investigate the effect of girder spacing, span length, slab thickness, slab width, and spacing and size of bracing. The computer program, GTSTRUDL, was used to idealize the bridge superstructures as the eccentric beam model, the concrete slab by quadrilateral shell elements, steel girders by space frame members, and the composite action between these elements by rigid links. The distribution factors obtained from these analyses were compared with those from the AASHTO Standard and LRFD methods. It was observed through the parametric studies that girder spacing, span length, and slab thickness were the dominant parameters compared with others. The LRFD distribution factor for the interior girder was found to be conservative in most cases, whereas the factor for the exterior girder to be unconservative in longer spans. Furthermore, a regression analysis was performed to develop simplified LDF formulas. The formulas developed in this study produced LDF values that are always conservative to those from the finite element method and are generally smaller than the LDF values obtained from the AASHTO LRFD specification. The proposed simplified equation will assist bridge engineers in predicting the actual LDF in two-span continuous I-girder bridges.

• The Journal of Engineering Research
• /
• v.1 no.1
• /
• pp.5-14
• /
• 1997

The purpose of thesis is to analyze the radiation characteristics of an offset gregorian antenna in order to design the satellite-loaded antenna. In order to compute the radiation pattern of the sub-reflector, the reflected wave is obtained by GO(Geometric Optics) at an arbitrary shaped sub-reflector. Then the total radiation EM wave is obtained by summing the diffracted fields obtained by UTD(Uniform Geometrical Theory of Diffraction) and the GO fields. In order to calculate the far field radiation pattern of the main reflector, the radiation integral equation is derived from the induced current density on reflector surface using PO(Physical Optics). The kernel is expanded in terms of Jacobi-Bessel series for increasing the computational efficiency, then the modified radiation integral is represented as the double integral equation independent of observation points. When the incident fields are assumed to be x-or y-polarized field, the characteristics of radiation patterns in the gregorian antenna is analyzed in case of the main reflector having the focal length of 62.4$\lambda$, diameter of 100$\lambda$, and offset height of 75$\lambda$, and the sub-reflector having the eccentricity of 0.501, the inter focal length og 32.8$\lambda$, the horn axis angle of $9^{\circ}$ and the half aperture angle of $15.89^{\circ}$. The cross-polarized level and side lobe level in the offset geogorian reflector are reduced by 30dB and 10dB, respectively, in comparison with those of the offset parabolic antenna.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.89-94
• /
• 2008

Purpose: To observe the high temperature creep test and the fracture surface of the samples of 9% Ni alloy steel generally used for all kinds of mahine parts and predict the durability of that by determining a constant of C with a Larson-Miller variable. Methods: The equipment of this test was made into lever-beam style designed by Andrade and F. Garofalo et al.. The condition of creep test was set under 16 kinds of conditions after fixing 4 kinds of temperature condition and 4 kinds of stress condition to check how it effects the samples. Results: The temperature of creep test was increased, the stress index (n) of creep deformation was gradually decreased from 3.97 to 3.55. The activation energy of creep deformation was decreased from 90.39 to 83.64 kcal/mol when the stress was increased. A constant of C value by calculation of larson-Miller variable was about 22 and if temperature for use is suggested, the durability could be calculated. Conclusions: By analyzing the fracture phenomenon and suggesting the observation result of the fracture surface of the samples and creep test of 9% Ni alloy steel, the basic design data for the practical use of accessories in the field of equipment could be constructed and used to predict the durability of the equipment.

• Journal of muscle and joint health
• /
• v.14 no.2
• /
• pp.127-136
• /
• 2007

Purpose: There has been a need to integrating the self-help program for arthritis with the TaiChi for arthritis patient. The purpose of this study was to develop and to examine the effect of the Self-help and Tai Chi for arthritis (SHTCA) program for arthritis. Method: This study was designed non equivalent control group pre-post test, quasi-experimental design. A total 40 participants were recruited in W-city, 29 participants(14-experimental group and 15-control group) completed post test. The experimental group participated in the SHTCA once a week for 8 weeks. SHTCA program was consisted of understanding of the arthritis, contracting of the promise, exercise for muscle strength and joint flexibility and 8 movements of Tai Chi exercise. Coloring plus program to cellular phone was used to encourage the exercise and participation by the KT-SHUT twice a week. Measures used to examine the effect of the SHTCA were EQ-5D standardized five dimensions(mobility, self-care, usual activities, pain & discomfort, and anxiety & depression), and health perception, joint flexibility, grasping power, and balance. Collected data was analyzed by SPSS WIN 14.0. Results: The experimental group had significantly increased the EQ-mobility(p=.033), health perception(p=.000), right shoulder flexibility(p=.007), and left shoulder flexibility(p=.002) compared to the control group. In addition, pain was decreased(p=.052) and right grip was increased(p=.052) after 8 weeks program in the experimental group. Conclusion: This SHTCA using coloring plus program was found partially effective and satisfactory. We recommended further research on the effect of this SHTCA effects.

• Journal of Internet Computing and Services
• /
• v.16 no.5
• /
• pp.99-105
• /
• 2015

Currently robots are widely used in schools for educational purpose. With wide spread of robot-based education, it is known that major advantage of robot-based education is to enhance creativity and logical thinking of students. Although robots can be very useful tools for assisting students' study activities, there have not been lots of teaching-learning models for robot-based education.In this paper, a teaching-learning model is presented for robot-based education. The proposed model is designed based on constructivism. The proposed model consists of 6 stages: preparation, design, assembling, demonstration run, evaluation, and application & extension. The proposed model has the following characteristics. First, the proposed model is designed to enhance creativity and logical thinking ability of learners. Learners are supposed to be involved in self-directed activities and required to provide results based on their own ideas. Teachers are supposed to mediate students only if necessary. Second, learners are encouraged to participate in activity via diverse interaction. The interaction in this model includes learner-to-learner interaction, learner-to-teacher interaction, and learner-to-expert interaction. The proposed model encourages learners to solve the problem with cooperating each other. Also, teachers are supposed to guide students if necessary and observe and monitor behavior of students all the time. Third, motivation is provided in the beginning stage of the instruction. Fourth, in the proposed model, both study results and study process are equally important. In the model, study process is reviewed at the final stage.

• Journal of Internet Computing and Services
• /
• v.10 no.2
• /
• pp.1-13
• /
• 2009

Intrusion detection is a process that identifies the attacks and responds to the malicious intrusion actions for the protection of the computer and the network resources. Due to the fast development of the Internet, the types of intrusions become more complex recently and need immediate and correct responses because the frequent occurrences of a new intrusion type rise rapidly. Therefore, to solve these problems of the intrusion detection systems, we propose a sequential pattern miner for analysis of the alert data in order to support intelligent and automatic detection of the intrusion. Sequential pattern mining is one of the methods to find the patterns among the extracted items that are frequent in the fixed sequences. We apply the prefixSpan algorithm to find out the alert sequences. This method can be used to predict the actions of the sequential patterns and to create the rules of the intrusions. In this paper, we propose an extended prefixSpan algorithm which is designed to consider the specific characteristics of the alert data. The extended sequential pattern miner will be used as a part of alert data analyzer of intrusion detection systems. By using the created rules from the sequential pattern miner, the HA(high-level alert analyzer) of PEP(policy enforcement point), usually called IDS, performs the prediction of the sequence behaviors and changing patterns that were not visibly checked.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.71-79
• /
• 2016

As computer technology continues to evolve, the Computational Sciences utilized in Physics, Chemistry, Materials Science, and Life Sciences have been attracting more attention. In Korea, to compensate for the drawbacks in Computational Science, students and researchers have been using the EDISON platform. The EDISON platform provides a web portal service for education and research and an environment for addressing complex issues involving five fields, e.g., Computational Fluid Dynamics (CFD), Nanophysics, Computational Chemistry, Structural Dynamics, and Computational Design. As the platform and user scale increase beyond service provision, the need for efficient operation of its currently running data management system is on the rise. In this study, we resolve the data synchronization issues between the existing EDISON platform and web portal. As the EDISON platform is integrated with the web portal, a file management service is implemented to integrate the management of user data and files, which ultimately improves the overall efficiency of file management.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.81-91
• /
• 2016

VANET is one of the most developed technologies many people have considered a technology for the next generation. It basically utilizes the wireless technology and it can be used for measuring the speed of the vehicle, the location and even traffic control. With sharing those information, VANET can offer Cooperative ITS which can make a solution for a variety of traffic issues. In this way, safety for drivers, efficiency and mobility can be increased with VANET but data between vehicles or between vehicle and infrastructure are included with private information. Therefore alternatives are necessary to secure privacy. If there is no alternative for privacy, it can not only cause some problems about identification information but also it allows attackers to get location tracking and makes a target. Besides, people's lives or property can be dangerous because of sending wrong information or forgery. In addition to this, it is possible to be information stealing by attacker's impersonation or private information exposure through eavesdropping in communication environment. Therefore, in this paper we propose Privacy Assurance Architecture for VANET to ensure privacy from these threats.

• Journal of KIISE:Software and Applications
• /
• v.30 no.11
• /
• pp.1080-1091
• /
• 2003

Recently, the distance education has been rapidly proliferated with the rapid growth of the Internet and high speed networks. There has been relatively much research with regard to online lecture (teaching and studying) tools for the distance education, compared to the virtual laboratory tools (for self-study and experiments). In this paper, we design and implement a web-based simulation tool, named as SimDraw, for the virtual laboratory in the distance education. To apply the web-based simulation technology into the distance education, some requirements should be met; firstly, the user interface of the simulation should be very easy for students. Secondly, the simulation should be very portable to be run on various computer systems of remote students. Finally, the simulation program on remote computers should be very thin so that students can easily install the program onto their computers. To meet these requirements, SimDraw adopts the client/server architecture; the client program contains only model development and animation functions so that no installation of a client program onto student's system is required, and it can be implemented by a Java applet in Web browsers. The server program supports client programs by offering the functions such as remote compiling, model storing, library management, and user management. For the evaluation of SimDraw, we show the simulation process using the example experimentation of the RIP(Routing Information Protocol) Internet routing protocol.