• 한국대기환경학회지
• /
• 제34권5호
• /
• pp.697-707
• /
• 2018

A fast running model comprising the climate change effects is proposed for urban heat environment simulations so as to be used in urban heat island studies and/or the urban planning practices. By combining Hot City Model, a high resolution urban temperature prediction model utilizing the Lagrangian particle tracing technique, and the numerical weather simulation data which are constructed up to year of 2100 under the climate change scenarios, an efficient model is constructed for simulating the future urban heat environments. It is applicable to whole city as well as to a small block area of an urban region, with the computation time being relatively short, requiring the practically manageable amount of the computational resources. The heat environments of the entire metropolitan Seoul area in South Korea are investigated with the aid of the model for the present time and for the future. The results showed that the urban temperature gradually increase up to a significant level in the future. The possible effects of green roofs on the buildings are also studied, and we observe that green roofs don't lower the urban temperature efficiently while making the temperature fields become more homogeneous.

• 한국통신학회논문지
• /
• 제30권9C호
• /
• pp.907-912
• /
• 2005

H/W에 구현되는 음성인식 시스템에서 인식속도의 향상을 위한 새로운 알고리즘이 본 논문에서 제안되었다. 제안된 고속 관측확률 계산(Fast Computation of Observation Probability : FCOP) 알고리즘은 관측확률식을 근사화시키는 방법으로, CDHMM에서 상태(state)로 주어지는 확률분포함수들 중에서 일부를 효과적으로 제거하여 계산량을 최소화시키는 방법이다. 실제 H/W 환경의 음성인식에 응용한 실험 결과, 기존의 방법에 비해 인식률의 저하를 최소로 유지하며, 명령어 사이클을 $20\%\~32\%$ 감소시킬 수 있었으며, 인식속도를 약 $30\%$향상시킬 수 있었다. 제안된 알고리즘을 제한된 자원을 가지는 실제의 휴대폰에 탑재하여. 인식속도 및 인식률을 측정한 결과 인식률의 저하를 $0.2\%$ 이하로 유지하면서, 인식속도를 $30\%$ 이상 증가시킬 수 있었다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권1호
• /
• pp.34-38
• /
• 2005

The finite element method is very flexible for new shapes and provides flux distribution, magnetomotive force, eddy currents, and torques. However, it requires lengthy computational time in order to achieve desired accuracy. The magnetic equivalent circuit method takes less computation time than the finite element method. Therefore, the finite element method is mainly used to confirm the completed design. The magnetic equivalent circuit method is convenient for complicated analysis of the transient state of the induction motor. The magnetic equivalent circuit method is restricted to only one direction of magnetic flux. In this paper, the construction elements (that is, stator iron, rotor iron, yoke, air gap, etc.) of the squirrel cage induction motor were represented by a flux tube and the air gap magnetomotive force was calculated by the magnetic equivalent circuit method. Starting transient torque and phase current of the squirrel cage induction motor were verified by the theoretical calculation and the experiment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.201-201
• /
• 2006

영구자석은 크게 Hard ferrite와 희토류계 자석, 그리고 Alnico 주조자석으로 구별되어진다. 그동안 Hard ferrite는 산업적으로 전자기 응용제품 또는 각종 구동 모터에 응용되어 왔지만, 최근 Nd계 희토류 자것이 고성능 모터의 소재로 급격히 대체되고 있다. 하지만, 희토류계 원료에 비해 동일 중량 대비 40~60배 가량 저렴한 Hard ferrite의 사용은 현재까지도 꾸준히 유지되고 있으며, 최근 자동차 고성능 모터용 Sr ferrite의 개발이 연구 중이다.[2] 본 연구에서는 제일원리 전산모사를 통하여 HCP 구조의 기본 Unit Cell 64개 원자를 가진 Sr-ferrite의 격자상수를 계산하여 기존 연구결과와 비교하였으며, 자화에너지와 자기모멘트를 계산하였다. 또한 향후 각종 첨가물의 영향에 대한 연구를 위해 기본 구조 및 치환 구조에 대해 고찰하였다. 그 결과 가장 안정한 에너지를 갖는 격자상수는 a=5.88, b=23.03으로 계산되어 Kimura et al의 측정 결과와 유사한 결과를 얻을 수 있었으며, $E_F$가 3.9171, $M_B$는 46.6481로 계산되었다. 항후 Sr-ferrite의 구조에서 Fe atom의 일부를 동일주기 원소인 Cr, Mn, Co, Ni, Cu로 치환하여 자기적 특성을 계산하여 본 연구결과와 비교하고자 한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권4호
• /
• pp.513-528
• /
• 2013

A floating Oscillating Water Column (OWC) wave energy converter, a Backward Bent Duct Buoy (BBDB), was simulated using a state-of-the-art, two-dimensional, fully-nonlinear Numerical Wave Tank (NWT) technique. The hydrodynamic performance of the floating OWC device was evaluated in the time domain. The acceleration potential method, with a full-updated kernel matrix calculation associated with a mode decomposition scheme, was implemented to obtain accurate estimates of the hydrodynamic force and displacement of a freely floating BBDB. The developed NWT was based on the potential theory and the boundary element method with constant panels on the boundaries. The mixed Eulerian-Lagrangian (MEL) approach was employed to capture the nonlinear free surfaces inside the chamber that interacted with a pneumatic pressure, induced by the time-varying airflow velocity at the air duct. A special viscous damping was applied to the chamber free surface to represent the viscous energy loss due to the BBDB's shape and motions. The viscous damping coefficient was properly selected using a comparison of the experimental data. The calculated surface elevation, inside and outside the chamber, with a tuned viscous damping correlated reasonably well with the experimental data for various incident wave conditions. The conservation of the total wave energy in the computational domain was confirmed over the entire range of wave frequencies.

• Structural Engineering and Mechanics
• /
• 제23권6호
• /
• pp.675-689
• /
• 2006

In structural analysis of tall buildings the traditional primary loading analysis approach that assumes all the loads are simultaneously applied to the fully built structure has been shown to be unsuitable by many researches. The construction sequential analysis that reflects the fact of the level-by-level construction of tall buildings can provide more reliable results and has been used more and more. However, too much computational cost has prevented the construction sequential analysis from its application in CAD/CAE software for building structures, since such an approach needs to deal with systematic changing of resultant stiffness matrices following level-by-level construction. This paper firstly analyzes the characteristics of assembling and triangular factorization of the stiffness matrix in the finite element model of the construction sequential analysis, then presents a fast construction sequential analysis strategy and a corresponding step-by-step active column solver by means of improving the existing skyline solver. The new strategy avoids considerably repeated calculation by only working on the latest appended and modified part of resultant stiffness matrices in each construction level. Without any simplification, the strategy guarantees accuracy while efficiency is greatly enhanced. The numerical tests show that the proposed strategy can be implemented with high efficiency in practical engineering design.

• 설비공학논문집
• /
• 제28권5호
• /
• pp.186-194
• /
• 2016

As a turbulence-enhancing device, a mixing vane installed at a spacer grid of the fuel assembly plays a role in improving the convective heat transfer by generating either swirl flow in the subchannels or cross flow between fuel rod gaps. Therefore, both configuration and arrangement pattern of a mixing vane are important factors that determine the performance of a mixing vane. In this study, in order to examine the flow distribution features inside $5{\times}5$ fuel assembly with swirl-type mixing vanes used in benchmark calculation of OECD/NEA, simulations were conducted with commercial CFD software ANSYS CFX R.14. Predicted results were compared to data measured from MATiS-H (Measurement and Analysis of Turbulent Mixing in Subchannels-Horizontal) test facility. In addition, the effect of swirl-type mixing vanes on flow pattern inside the fuel assembly was described.

• 한국통신학회논문지
• /
• 제24권9B호
• /
• pp.1785-1794
• /
• 1999

Affine projection 알고리즘은 RLS보다 적은 계산량으로 LMS보다 우수한 수렴성능을 나타낸다. 그러나 affine projection 알고리즘은 역행렬 연산을 필요로 하기 때문에 여전히 LMS에 비해 과중한 계산을 필요로 한다. 본 논문에서는 affine projection 알고리즘을 분석하여 이 알고리즘이 Gram-Scheme 구조로 해석될 수 있음을 보이고 이를 이용하여 NLMS와 비슷한 계산량으로 affine projection 알고리즘을 근사적으로 구현할 수 있는 새로운 알고리즘을 제안하였다. 제안한 방법은 NLMS와 비슷한 계산량을 가지면서 기존의 affine projection 알고리즘과 비슷한 수렴성능을 나타내었다.

• 한국지능시스템학회논문지
• /
• 제14권7호
• /
• pp.807-815
• /
• 2004

본 논문은 고정 파라미터를 갖는 퍼지 PID제어기의 설계방법을 기술하고 컴퓨터 연산 시간을 줄일 수 있는 단순화된 퍼지 PID제어기를 제안하며 제안한 제어기의 안정도를 분석한다. 안정도 분석을 위해 사용한 소이득 정리로부터 전체 피드백 시스템의 BIBO 안정도의 실제적인 충분조건을 유도하고, 유도한 안정 조건으로부터 안정한 선형 PID제어기의 파라미터로부터 퍼지 PID제어기의 파라미터를 결정하는 방법을 고찰한다. 마지막으로 선형 시스템과 비선형 시스템에 대한 컴퓨터 시뮬레이션을 실시하고 비선형 퍼지 PID제어기의 시뮬레이션 결과를 선형 PID제어기의 시뮬레이션 결과와 비교하여 성능을 확인한다.

• 한국수소및신에너지학회논문집
• /
• 제26권2호
• /
• pp.184-191
• /
• 2015

As the power electronics system increases the frequency, the power loss and thermal management are paid more attention. This research presents a real time model of dissipation power with junction temperature response for 120kw IGBT inverter which is applied to the thermal management of high power IGBT inverter. Since the computational time is critical for real time simulation, look-up tables of IGBT module characteristic curve are implemented. The power loss from IGBT provides a clue to calculate the temperature of each module of IGBT. In this study, temperature of each layer in IGBT is predicted by lumped capacitance analysis of layers with convective heat transfer. The power loss and temperature of layers in IGBT is then communicated due to mutual dependence. In the dynamic model, PWM pulses are employed to calculation real time IGBT and diode power loss. Under Matlab/Simulink$^{(R)}$ environment, the dynamic model is validated with experiment. Results showed that the dynamic response of power loss is closely coupled with effective thermal management. The convective heat transfer is enough to achieve proper thermal management under guideline temperature.