• 대한치과교정학회지
• /
• 제30권2호
• /
• pp.127-142
• /
• 2000

임상에서 다양하게 사용되는 Multiloop Edgewise Arch Wire(MEAW)는 구치부 치아의 치축 직립을 위해 II급 고무줄이나 수직고무줄과 함께 사용된다. 이때 tip back bend의 정도는 각 환자의 구치치축의 근심경사의 정도에 따라 가감이 결정되나 이 장치가 실제 치근막에서 어떤 효과를 나타내는지 정확히 알려진 바는 없다. 이에 저자는 MEAW의 역학적 효과를 알아보기 위해 tip back bend의 정도를 변화시킨 후 II급 고무줄, 수직고무줄을 적용시켜 유한요소법을 통해 치근막에서 발생되는 응력의 분포와 크기를 정량적으로 비교, 관찰하여 장치의 역계를 이해하고 치료효과를 예측해 보고자 실험을 고안하였다. 발치나 교정치료의 경험이 없는 25세 남자 정상교합자를 대상으로 컴퓨터 단층촬영을 시행하여 얻은 방사선필림을 기초로 하여 유한요소 상악치아모델과, 치근막모델을 제작하였으며 여기에 beam element로 제작된 MEAW의 tip back bend를 5도, 10도, 15도로 달리하여 II급 고무줄 및 수직고무줄을 적용시켜 각 치근막에서의 압축, 인장력의 분포와 응력의 크기를 상호 비교한 결과 다음과 같은 결론을 얻었다. 1. MEAW에 tip back bend를 5도, 10도, 15도로 부여하고 II급 고무줄이나 수직고무줄을 적용시켰을때 전체 치근막에 나타나는 압축, 인장의 분포는 II급 고무줄, 수직고무줄 각각의 경우에서 tip back bend의 정도에 상관없이 유사한 양상을 나타냈다. 2. 각 치아의 치근막에 나타난 압축, 인장력의 크기는 5도,10도의 경우보다 15도 tip back bend 부여시 더 크게 나타났다. 3. 제1, 2대구치 원심측 치근막에서는 압축력이 나타났으며 특히 제2대구치 치근막의 압축부위가 제1대구치 치근막 압축부위보다 더 넓고 압축력의 크기도 더 크게 나타났다. 또한 tip back bend 정도가 클수록 압축력도 크고 압축부위도 더 넓게 나타났다. 4. 대구치 치근막의 압축력은 소구치 치근막의 압축력보다 상대적으로 더 작게 나타났다. 5. II급고무줄과 수직고무줄 적용 시를 비교해 보면 수직고무줄 장착시 전치부 치근막에 인장력이 더 넓게, 그 크기는 더 작게 나타났다. 반면에 구치부 치근막에 나타나는 응력의 분포와 크기는 별 차이를 보이지 않았다. 5. 전치부 치근막 인장부위에서 인장력은 견치에서 제일 컸다.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.539-547
• /
• 2010

Laser shock peening is useful to improve fatigue characteristic of multiple number of metals and alloys. This process induces a compressive residual stress on the metal surface, and when tensile load is applied, growth of crack is delayed and which changes the characteristic of the metal surface. It is an innovative surface treatment technique for strengthening metals. Specimens of SM45C are used in this study. The effect of an inertial tamping layer on the residual stress field using laser shock peening setup and Nd:YAG laser power is evaluated. Residual stress distribution measured by X-ray diffraction. As a result of this study it can be presented that following condition of Nd:YAG laser power and inertial tamping layer parameters, compressive residual stress is generated on the surface of the SM45C. Results to experimental data indicate that laser shock peening has great potential as a means of improving the mechanical performance of the metal surface.

• 한국생산제조학회지
• /
• 제7권3호
• /
• pp.68-78
• /
• 1998

Welding structure contains residual stress due to thermal-plastic strain during welding process, and its magnitude and distribution depend on welding conditions. Cracks initiate from various defects of the weldment, propagate and lead to final fracture, The crack initiation and propagation processes are affected by the magnitude and distribution. Therefore, the magnitude and distribution of weldment residual stress should be considered for safety design and service of welding structures. Also it is very important that more accurate assessment method of fatigue crack growth must take into account the redistributing the residual stress quantitively. because the residual stress in weldment has characteristics of its redistribution with loading magnitude, number of cycles and fatigue crack propagation. In this study fatigue crack behavior of STS-304 weldment was investigated during crack propagation into tensile residual stress region or compressive residual stress region. Crack growth rates were predicted and compared with experimental results.

• 대한치과교정학회지
• /
• 제28권3호
• /
• pp.391-398
• /
• 1998

본 연구는 유한요소법을 사용하여 상악견치에 intrusion arch wire를 강제로 engage시켰을 때 상악 견치와 치근막에서 발생되는 압축력과 인장력의 분포의 양을 알아보고 어느 부분에 집중되는가를 분석하였다. 또한 각 부분에서의 압축력과 인장력의 비율을 비교하기 위해서 시행하여 다음과 같은 결과를 얻었다. 1. 상악 견치의 FA point와 백악법랑경계부분에서는 압축력과 인장력의 비율이 거의 비슷하게 나타났다. 2. 치근첨 부분에서는 압축력이 인장력의 거의 4배정도 크게 나타났다. Intrusion force적용시 치근흡수 정도가 치근첨에서 발생되는 것을 정량화시켜서 보여준 결과이다. 3. 백악법랑경계부분은 즉 FA point를 제외하고는 압축력과 인장력이 가장 큰 값을 보이고 있다. 즉 치아에 교정력이 직접 적용된 부분을 제외하고는 치아와 치주인대가 처음 접촉되는 백악법랑경계부에서 응력이 집중되는 것을 유추할 수 있다.

• 한국정밀공학회지
• /
• 제25권3호
• /
• pp.165-175
• /
• 2008

An ankle-foot orthosis(AFO) is a brace for persons with gait disabilities to support or replace the function of ankle joint. Ankle-foot orthoses(AFO's) are usually prescribed to alleviate the drop-foot by constraining the excessive plantar flexion. The shape and the strength of the AFO are often based on 'trial and error' due to a lack of knowledge of the stress distribution in the AFO. In this study, an improved stress-freezing method was proposed to measure the stress distribution characteristics in the AFO. As a result, a photoelastic material with low freezing temperature was developed to measure the stresses under a person's direct contact loading condition. The three-dimensional stress-1rozen photoelastic models of AFO's for five stages of stance phase such as heel contact, foot flat, mid stance, heel off, and toe off were produced. The results of photoelastic analysis revealed that the stresses developed in the AFO were varied considerably from tensile to compressive or vice versa, during walking. At the posterior part of ankle joint in the AFO, the maximum compressive stress of 1.81MPa was observed in the mid stance, and the maximum tensile stress of 0.74MPa was observed during heel contact. The overall stress levels in the AFO's were low in the toe off phase. The results suggested that the posterior part of ankle joint might be the most fragile part in the AFO.

• 대한치과보철학회지
• /
• 제30권2호
• /
• pp.203-224
• /
• 1992

The purpose of this study was to evaluate the stress distribution developed in supporting structures by distal extension removable partial denture with 4-types of direct retainer. The direct retainers examined were Akers clasp, RPI clasp, RPA clasp and RPL clasp in bilateral & unilateral free end case. 3-dimensional photoelastic stress analysis was used to record the isochromatic fringe patterns and to calculate the compressive stress at measuring points. The results were as follows. 1. In bilateral free end case, RPI clasp exhibited the similar stress distribution on distal and mesial alveolar crest but Akers clasp exhibited higher stress concentration on distal alveolar crest than mesial alveolar crest. 2. In bilateral free end case, RPA clasp and RPL clasp exhibited the similar stress distribution on distal and mesial alveolar crest and RPL clasp exhibited higher stress concentration on buccal alveolar crest than lingual alveolar crest. 3. Akers clasp produced high stress concentration on residual alveolar ridge distally, but RPI clasp, RPA clasp and RPL clasp produced even stress distribution on residual alveolar ridge. 4. Removable partial denture in unilateral free end case exerted higher stress on abutment tooth root apex than bilateral distal extension removable partial denture.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.202-212
• /
• 2000

This study investigates the ductility capacity of slender-wide reinforced concrete walls under predominant flexural moment loading. The experimental work for this study aims to provide design guidelines for bar detailing in critical regions under compressive stress in particular in case of slender-wide RC walls. According to the experimental observation the Bernoulli hypothesis of linear strain distribution is no longer valid and the ultimate compressive strain of concrete is significantly reduced, It is postulated that the nonlinear strain distribution causes the concentrated compressive stressed region and hence the premature crushing failure at the toe of walls. The reduced ultimate strain and nonlinear strain distribution need transverse reinforcement for confinement and more realistic models for the strength and displacement estimation of slender-wide RC wall.

• 대한기계학회논문집
• /
• 제15권2호
• /
• pp.436-444
• /
• 1991

A computational method has been developed to analyze the bone-remodeling induced by external fixator. The method was based on the Finite Element Method (FEM) in combination with numerical formulation of adaptive bone-remodeling theories. As a feed-back control variable, compressive strain and effective stress were used to determine the surface remodeling and internal (density) remodeling respectively. Surface remodeling and internal remodeling were combined at each time step to predict the rel situation. A noticeable shape and density change were detected at the region between two pins and density change was decreased with time increment. At final time step, the shape and density distribution were converged closely to its original intact bone model. Similar change was detected in stress distribution. The altered stress distribution due to the pin and external fixator converged to the intact stress distribution with time.

• 한국세라믹학회지
• /
• 제43권7호
• /
• pp.415-420
• /
• 2006

The residual stresses in the interface region of the Thermal Barrier Coating (TBC)/Thermally Grown Oxide (TGO)/Bond Coat (BC) were calculated on the TBC-coated superalloy samples using a Finite Element Method (FEM). It was found that the stress distribution of the interface boundary was dependent upon mainly the geometrical shape or its aspect ratio and the thickness of TGO layer, which was formed by growth and swelling behavior of oxide layer. Maximum compressive residual stress in the TBC/TGO interface is higher than that of the TGO/bond coat interface, and the tensile stress had nothing to do with change of an aspect ratio. The compressive residual stresses in the TBC/TGO and TGO/bond coat interface region increased gradually with the TGO growth.

• Geomechanics and Engineering
• /
• 제11권2호
• /
• pp.269-288
• /
• 2016

The jointed rock mass behavior often plays a major role in the design of underground excavation, and their failures during excavation and in operation, are usually closely related to joints. This research attempts to evaluate the effects of two basic geometric factors influencing tunnel behavior in a jointed rock mass; joints spacing and joints orientation. A hybridized indirect boundary element code known as TFSDDM (Two-dimensional Fictitious Stress Displacement Discontinuity Method) is used to study the stress distribution around the tunnels excavated in jointed rock masses. This numerical analysis revealed that both the dip angle and spacing of joints have important influences on stress distribution on tunnel walls. For example the tensile and compressive tangential stresses at the boundary of the circular tunnel increase by reduction in the joint spacing, and by increase the dip joint angle the tensile stress in the tunnel roof decreases.