• Advances in concrete construction
• /
• v.14 no.2
• /
• pp.115-130
• /
• 2022

This paper presents an application of the maturation effect on the strength of high-strength concrete which is produced with different origin aggregates. While investigating the maturation effect on HSC 384 specimens were prepared with 22 different origin aggregates. These prepared specimens were subjected to the standard compressive tests which were applied after curing for 2, 7, 28, and 56 days under appropriate conditions. The test results revealed that bright surface-low adherence behavior is valid in normal strength concretes, but is not as effective as expected in high-strength concretes. The application of artificial neural networks (ANNs) to predict 2, 7, 28, and 56 day compressive strength of HSC is also investigated in this paper. An ANN model is built, trained, and tested using the available test data gathered from experimental studies. The ANN model is found to predict 2, 7, 28, and 56 days of compressive strength of high-strength concrete well within the ranges of the input parameters considered. These comparisons show that ANNs have strong potential as a feasible tool for predicting the compressive strength of high-strength concrete within the range of the input parameters considered.

• The Monthly Technology and Standards
• /
• s.12
• /
• pp.67-78
• /
• 2003

In order to keep a characteristic corrugated fibreboard of fruits and flowers, temperature and humidity change of corrugated fibreboard are analyzed. According to relative humidity rises at fixed temperature, bursting strength of corrugated fibreboard was fallen and double wall corrugated fibreboard appeared greatly the bursting strength decline rate than double faced corrugated fibreboard and edgewise compressive strength of paper more than humidity 80% in rapidly fall. A column crush test of paper became decrease in the high temperature and ordinary temperature strength did over humidity 70% rapidly fallen and strength decrease happened by low temperature 80% slowly fallen and later rapidly. According to ISO standard temperature humidity conditioning (23$\pm$2 , 50$\pm$2%) change, pulp composition difference as to the ring crush strength of a physical strength and generally compare to KS standard increased 5∼8% for the compressive strength, and wet strength reagent was increased 4% inside and out.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.246-253
• /
• 2019

This study was conducted to explore the optimum proportion of zeolite and zeolite-kaolin as additives to cement clinker and gypsum samples, while maintaining the strength properties of produced environmentally sustainable cements. According to the British standard method, zeolite was added to cement clinker in proportions of 5-12% and 10-12% by weight, respectively, in the preparation of samples of zeolite-containing cement and zeolite-kaolin-based cement. Kaolin was used as a second additive as 10-20% of the total weight. The compressive strength tests were performed on base cement samples according to a standard procedure given in ASTM C109 Compressive Strength of Hydraulic Cement. These values were compared with those of the reference sample and the Omani allowable limits. The results indicated that the best compressive strength values were obtained with 88% cement clinker, 5% gypsum, and 7% zeolite for the zeolite-containing cement. Quantities of 70% cement clinker, 5% gypsum, 10% zeolite, and 15% kaolin gave the best results for zeolite-kaolin-based cement, resulting in a substitution of than 25% cement clinker. The study concluded that the partial cement clinker replacement using zeolite/kaolin combination may have a great influence on the reduction of $CO_2$ emission and energy saving in cement manufacturing.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.7
• /
• pp.19-26
• /
• 2018

This study tested 25 lightweight aggregate concrete (LWAC) mixtures using the expanded bottom ash and dredged soil granules to examine the compressive strength gain of such concrete with different ages. The test parameters investigated were water-to-cement ratios and the natural sand content for the replacement of lightweight fine aggregate. The compressive strength gain rate in the basic equation specified in fib model code was experimentally determined in each mixture and then empirically formulated as a function of the water-to-cement ratio and oven-dried density of concrete. When compared with 28-day compressive strength, the tested LWAC mixtures exhibited relatively low gain ratios (0.49~0.82) at an age of 3 days whereas the gain ratios (1.16~1.41) at 91 days were higher than that (1.05~1.15) of the conventional normal-weight concrete. Thus, the fib model equations tend to overestimate the early strength gain of LWAC but underestimate the long-term strength gain. The proposed equations are in good agreement with the measured compressive strength development of LWAC at different ages, indicating that the mean and standard deviation of the normalized root mean square errors determined in each mixture are 0.101 and 0.053, respectively.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.1
• /
• pp.29-43
• /
• 1998

This study was to investigate the effect of .compressive load and cyclic humidity(2$0^{\circ}C$, 65% and 90% RH) on the physical and mechanical properties of corrugated board. Corrugated boards in the study were under compressive load and under cyclic humidity, and their properties were compared to those without load. Results were summarized as follows ; 1 Statistically significant correlation was shown between the ring crush of the boards and the compressive strength of cylinder specimen made from the boards. So we could study the compressive behavior of board with cylinder specimen. 2. The boards under the compressive load increased their moisture content and thickness much more than those without load both in constant and in cyclic RH. 3. The compressive and tensile strength of board samples were inversely and closely proportional to the sheet moisture content regardless of their load and humidity history. 4. The moisture content did not show any significant proportionality to the change of burst strength of boards within this experiment. 5. Board reconditioning in standard condition led to the recovery of the strength loss that had occurred under various load and humidity condition. 6. The handsheets prepared from the boards that had experienced compressive load and cyclic humidity, and those with no-load and 65% RH did not show any significant difference in strength properties. No physical damage or load-carrying properties of the wood fiber were observed by the compressive load and cyclic humidity history.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.93-94
• /
• 2012

In this study, prediction of later-age compressive strength of ultra-high strength concrete, based on the accelerated strength of concrete cured in 80℃ warm water was investigated. As a result, the nature of ultra-high strength concrete showed a rapid early strength enhancement, compressive strength using warm water method of 80℃ at 2days is same compressive at 28days using standard curing.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.89-92
• /
• 2001

Because the grading of aggregate is major factor affecting on compressive strength and durability of concrete, the standard specification of concrete has proposed that the standard grading should be used to make ordinary concrete having good quality. But, it is not suitable for making product having low W/C because of difference between them in manufacturing processes and demanded efficiencies. This study investigated if the grading of the fine aggregate affects on tamping efficiency and compressive strength of concrete-based product. The results of this study showed that the suitable grading for making concrete-based product ranged from C type(FM:2.77) to D type(FM:3.38).

• Journal of the Korean Geotechnical Society
• /
• v.26 no.1
• /
• pp.75-83
• /
• 2010

Controlled low strength material (CLSM) is a flowable mixture and does not need to be compacted. It is produced by mixing portland cement, fly ash, fine aggregates, water and chemical admixtures. Sand is the most commonly used fine aggregates in the conventional CLSM, but it is getting more and more difficult to obtain sand in Korea. In this study, the characteristics of unconfined compressive strength, flow and applicability of a new CLSM that is produced by mixing of pond ash, fly ash, water, cement are examined. An unconfined compressive strength satisfies the standard unconfined compressive strength (0.5~1.0 MPa) were obtained when the mixture ratio of pond ash and fly ash is 30:70~70:30, cement ratio is 3.0~5.0%, and water content is 31~34%. The results of flow test indicate that the mixture ratio of pond ash and fly ash which satisfy the standard How value (0.2 m) is 30:70~70:30.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.124-129
• /
• 2003

In case that the mixing weight ratio of waste form between boric acid and paraffin was 3.3/l, which had been adopted in the concentrate waste drying system (CWDS) of domestic nuclear power plants. Using several specimens with different diameters and heights, 50/100mm specimens. compressive strength were measured. The experiment result showed that the small diameter specimens of compressive strength are increased more than large diameter specimens. (d=50＞75＞100mm) The average compressive strength of specimens showed that the range from 22.43 $\kg/textrm{cm}^2$ to 38.57$\kg/textrm{cm}^2$ (NRC standard$\geq$4.1 $\kg/textrm{cm}^2$). NRC standard is recommended that the compressive strength test specimens be right circular cylinders, 2 to 3 inches in diameter, with a height-to-diameter(H/D) ratio of approximately two. and compressive strength were increased more than large loading rate. As test result, this conditions are a good agreement, and estimated.

• Computers and Concrete
• /
• v.26 no.5
• /
• pp.385-395
• /
• 2020

The influence of combination of nano silica and silica fume, as partial cement replacement materials, on the properties of concrete has been studied through the measurement of compressive strength. The compressive strength of concrete in terms of mean, standard deviation and with-in-test coefficient of variation related to the variation in the nominated parameters have also been developed. The compressive strength data developed experimentally has been analyzed using normal-probability distribution and partial safety factors of composite concretes have been evaluated by using first order second moment approach with Hasofer Lind's method. The use of Nano silica and silica fume in concrete decreases the partial safety factor of concrete i.e., increase the reliability of concrete. The experimental results show that the properties of concrete having nano silica and silica fume in combination were better than that of a plain concrete. The SEM test results showing the level of Ca(OH)₂ in plain concrete and consumption level Ca(OH)₂ of concrete containing nano silica & silica fume have also been presented.