[KSCI] Korea Science Citation Index Service

http://dx.doi.org/10.4491/eer.2018.047

Application of zeolite/kaolin combination for replacement of partial cement clinker to manufacture environmentally sustainable cement in Oman

Abdul-Wahab, Sabah A. (Department of Mechanical and Industrial Engineering, Sultan Qaboos University)
Hassan, Edris M. (Department of Mechanical and Industrial Engineering, Sultan Qaboos University)
Al-Jabri, Khalifa S. (Department of Civil and Architectural Engineering)
Yetilmezsoy, Kaan (Department of Environmental Engineering, Faculty of Civil Engineering, Yildiz Technical University)

Publication Information

Environmental Engineering Research / v.24, no.2, 2019 , pp. 246-253 More about this Journal

Abstract

This study was conducted to explore the optimum proportion of zeolite and zeolite-kaolin as additives to cement clinker and gypsum samples, while maintaining the strength properties of produced environmentally sustainable cements. According to the British standard method, zeolite was added to cement clinker in proportions of 5-12% and 10-12% by weight, respectively, in the preparation of samples of zeolite-containing cement and zeolite-kaolin-based cement. Kaolin was used as a second additive as 10-20% of the total weight. The compressive strength tests were performed on base cement samples according to a standard procedure given in ASTM C109 Compressive Strength of Hydraulic Cement. These values were compared with those of the reference sample and the Omani allowable limits. The results indicated that the best compressive strength values were obtained with 88% cement clinker, 5% gypsum, and 7% zeolite for the zeolite-containing cement. Quantities of 70% cement clinker, 5% gypsum, 10% zeolite, and 15% kaolin gave the best results for zeolite-kaolin-based cement, resulting in a substitution of than 25% cement clinker. The study concluded that the partial cement clinker replacement using zeolite/kaolin combination may have a great influence on the reduction of $CO_2$ emission and energy saving in cement manufacturing.

Keywords

Compressive strength; Kaolin; Low cement clinker content; Low $CO_2$ emissions; Synthetic zeolite;

Citations & Related Records

Reference

1	Ilic B, Radonjanin V, Malesev M, Zdujic M, Mitrovic A. Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions. Constr. Build. Mater. 2017;133:243-252. DOI
2	Inan Sezer G. Compressive strength and sulfate resistance of limestone and/or silica fume mortars. Constr. Build. Mater. 2012;26:613-618. DOI
3	Kamarudin H, Mustafa Al Bakri AM, Binhussain M, et al. Preliminary study on effect of NaOH concentration on early age compressive strength of kaolin-based green cement. In: International Conference on Chemistry and Chemical Process IPCBEE 2011 May. 2011;10:18-24.
4	Chen C, Habert G, Bouzidi Y, Jullien A. Environmental impact of cement production: Detail of the different processes and cement plant variability evaluation. J. Clean. Prod. 2010;18:478-485. DOI
5	Abdul-Wahab SA, Al-Rawas GA, Ali S, Al-Dhamri H. Impact of the addition of oil-based mud on carbon dioxide emissions in a cement plant. J. Clean. Prod. 2016;112:4214-4225. DOI
6	Chen IA, Juenger MCG. Incorporation of waste materials into portland cement clinker synthesized from natural raw materials. J. Mater. Sci. 2009;44:2617-2627. DOI
7	Benhelal E, Zahedi G, Shamsaei E, Bahadori A. Global strategies and potentials to curb $CO_2$ emissions in cement industry. J. Clean. Prod. 2013;51:142-161. DOI
8	Kaddatz KT, Rasul MG, Rahman A. Alternative fuels for use in cement kilns: Process impact modelling. Procedia Eng. 2013;56:413-420. DOI
9	Mokrzycki E, Uliasz-Bochenczyk A. Alternative fuels for the cement industry. Appl. Energ. 2003;74:95-100. DOI
10	Bernardo G, Marroccoli M, Nobili M, Telesca A, Valenti GL. The use of oil well-derived drilling waste and electric arc furnace slag as alternative raw materials in clinker production. Resour. Conserv. Recycl. 2007;52:95-102. DOI
11	Kula I, Olgun A, Erdogan Y, Sevinc V. Effects of colemanite waste, cool bottom ash, and fly ash on the properties of cement. Cement Concrete Res. 2001;31:491-494. DOI
12	Vizcaino-Andres LM, Sanchez-Berriel S, Damas-Carrera S, Perez-Hernandez A, Scrivener KL, Martirena-Hernandez JF. Industrial trial to produce a low clinker, low carbon cement. Mater. De Constr. 2015;65:1-11.
13	Erdem TK, Meral C, Tokyay M, Erdogan TY. Use of perlite as a pozzolanic addition in producing blended cements. Cement Concrete Compos. 2007;29:13-21. DOI
14	Dong-xu L, Lin C, Zhong-zi X, Zhi-min L. A blended cement containing blast furnace slag and phosphorous slag. J. Wuhan Univ. Technol.-Mater. Sci. Ed. 2002;17:62-65.
15	Beddar M, Meddah A, Boubakria M, Haddad N. A study of the effects of partial replacement of clinker by limestone in the cement manufacture. Cement Wapno Beton 2014;81: 185-193.
16	Al-Swaidani AM, Aliyan SD. Effect of adding scoria as cement replacement on durability-related properties. Int. J. Concr. Struct. Mater. 2015;9:241-254. DOI
17	Al-Swaidani AM, Aliyan SD, Adarnaly N. Production of more sustainable mortar using finer volcanic scoria-based blended cements. J. Sust. Archit. Civil Eng. 2015;4:49-61.
18	Marroccoli M, Pace ML, Telesca A, Valenti GL, Montagnaro F. Utilization of coal combustion ashes for the synthesis of ordinary and special cements. Combust. Sci. Technol. 2010;182:588-599. DOI
19	Al-Dhamri H, Melghit K. Use of alumina spent catalyst and RFCC wastes from petroleum refinery to substitute bauxite in the preparation of Portland clinker. J. Hazard. Mater. 2010;179: 852-859. DOI
20	Cassagnabere F, Mouret M, Escadeillas G, Broilliard P, Bertrand A. Metakaolin, a solution for the precast industry to limit the clinker content in concrete: Mechanical aspects. Constr. Build. Mater. 2010;24:1109-1118. DOI
21	Canpolat F, Yilmaz K, Köse MM, Sümer M, Yurdusev MA. Use of zeolite, coal bottom ash and fly ash as replacement materials in cement production. Cement Concrete Res. 2004;34:731-735. DOI
22	Luhowiak W, Kadri EH, Lefevre A, Petruk MP, Sobol K. Use of municipal solid waste incineration (MSWI) fly ash for manufacturing ecological and energy saving cements. International Concrete Abstracts Portal: American Concrete Institute (ACI). Special Publication 2004;221:443-456.
23	Sobolev K, Türker P, Soboleva S, Iscioglu G. Utilization of waste glass in ECO-cement: Strength properties and microstructural observations. Waste Manage. 2007;27:971-976. DOI
24	Liu X, Zhang N. Utilization of red mud in cement production: A review. Waste Manage. Res. 2011;29:1053-1063. DOI
25	Bilodeau A, Mohan Malhotra V. High-volume fly ash system: Concrete solution for sustainable development. ACI Struct. J. 2000;97:41-48.
26	Berra M, Mangialardi T, Paolini AE. Reuse of woody biomass fly ash in cement-based materials. Constr. Build. Mater. 2015;76:286-296. DOI
27	Demirbas A. Optimizing the physical and technological properties of cement additives in concrete mixtures. Cement Concrete Res. 1996;26:1737-1744. DOI
28	Zhdanov SP, Khvoshchev SS, Feoktistova NN. Synthetic zeolites. Vol. 1: Crystallization. New York: Gordon and Breach Science Publishers; 1990.
29	Stoitchkov V, Abadjiev P, Lilkov V, Vasileva V. Effect of the "pozzolit" active mineral admixture on the properties of cement mortars and concretes part 1: Physical and mechanical properties. Cement Concrete Res. 1996;26:1065-1071. DOI
30	McCusker LB, Olson DH, Baerlocher C. Atlas of zeolite framework types (book). 2007.
31	ASTM C109. Compressive strength of hydraulic cement. West Conshohocken, PA, USA: ASTM International; 2009.
32	Ozvan A, Tapan M, Erik O, Efe T, Depci T. Compressive strength of scoria added Portland cement concretes. Gazi Univ. J. Sci. 2012;25:769-775.
33	Zaharaki D, Komnitsas K. Effect of additives on the compressive strength of slag-based inorganic polymers. Global Nest J. 2009;11:137-146. DOI
34	Komnitsas K, Zaharaki D, Perdikatsis V. Effect of synthesis parameters on the compressive strength of low-calcium ferronickel slag inorganic polymers. J. Hazard. Mater. 2009;161: 760-768. DOI
35	Yip CK, Lukey GC, Provis JL, Van Deventer JSJ. Effect of calcium silicate sources on geopolymerisation. Cement Concrete Res. 2008;38:554-564. DOI