• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.2
• /
• pp.1-10
• /
• 2011

Six pine trees (Pinus densiflora S. et Z.) at the Euilimji Lake Park in Jecheon were collected to investigate tree ages, growth decline pattern and the years of death. Tree-ring measurement was carried out using the Lintab with a resolution of 0.01mm. Tree age were 80-176 years. Cross-dating between the tree-ring series of each tree and the local chronology from Worak Mountain resulted that four and two trees died in 1998 and 1999, respectively. Three dead trees had only formed earlywood in the outermost tree ring and the others had incomplete latewood. Therefore, it was proven that the former trees died between spring and early summer, whereas the later ones died during late summer and/or autumn. The simultaneous deaths of trees suggest the insect damage and/or drought may be the crucial reason of the death, but frequent reaction woods, which were formed by leaning stem, and scars formed by physical damage may also contribute to the death.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.327-338
• /
• 2014

Relationship between growth rate and wood quality was investigated by physical and mechanical properties with Quercus rubra (24 years old) from five different origin of apricot. In greenwood moisture content, sapwood had higher moisture content than heartwood, and there was difference among different origin of apricot. There were different specific gravity of wood among different origin of apricot. Compared with higher growth rate with higher specific gravity in sapwood, opposite trend was observed in heartwood. There were difference in shrinkage based on origin of apricot, and higher growth rate wood had higher shrinkage and T/R ratio. Compression Young's modulus, bending strength, bending Young's modulus, and compact strength was difference among different origin of apricot. Higher growth rate wood had higher tensile strength, and also there was difference amont different origin of apricot. In hardness, 3 different directions had all difference among different origin of apricot, and higher growth rate wood showed higher hardness than others. Based on overall physical and/or mechanical properties and growth rate, apricot from Bancroft was best quality in current.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.842-851
• /
• 2016

The objective of this study was to improve physical and mechanical properties of soft-inner part of oil palm trunk (S-OPT) after impregnation with phenol formaldehyde (PF) resin and densification by close system compression (CSC) method. Effect of different methods of PF resin impregnation (i.e., no vacuum-pressure, vacuum, and vacuum-pressure) was evaluated. The results showed that PF resin impregnation and CSC significantly improved the physical and mechanical properties of S-OPT up to: (1) 176% in density; (2) 309% in modulus of rupture (MOR); (3) 287% modulus of elasticity (MOE); and (4) 191% in the compressive strength. Physical and mechanical properties of S-OPT showed their best performances when PF resin impregnated with vacuum-pressure method as shown by higher weight gain, density, MOR, MOE, compressive strength, and lower recovery of set due to better penetration of PF resin into S-OPT. Combining PF resin impregnation and densification by CSC method could be a good method to improve physical and mechanical properties of S-OPT.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.3
• /
• pp.18-27
• /
• 1996

The feasibility of using stress-wave technique in the transverse direction for the assessment of early stages of decay was investigated using compression test specimens having different annual ring orientations subjected to decay by Tyromyces palustris for various time intervals. Decay detection, quantitative assessment of decay, and the prediction of residual strength of decayed wood with less than five percent weight loss can be feasible using stress-wave parameters (wave velocity, wave impedance, and stress-wave elasticity) and their percent reduction due to decay, measured by stress-wave technique in the transverse direction. The use of stress-wave technique in the transverse direction for the application of this technique to structural members in service is desirable, when considering the easiness of attachment of accelerometers of stress-wave measuring device on the surface of members and also accurate detection of localized decayed areas. In stress-wave technique in the transverse direction, stress-wave parameters measured were different according to the angles between wave propagation path and annual ring, due to the anisotropy of wood structure. Therefore, it is recommended to use percent reduction in stress-wave parameters instead of stress-wave parameters. This evaluation method using percent reduction in stress-wave parameters is ideal when it is impossible to observe annual ring orientation on the transverse surface of wood.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.659-665
• /
• 2014

Wood properties are affected by environmental factors such as soil and climate change. There were close relationships between mechanical properties and stand characteristics for Quercus serrata stands in Gyeongsangnam-do Province, Jeollanam-do Province and Je-ju island. Both compression and shear strengths of woods showed a negative correlation with diameter at breast height (DBH) and the number of tree per hector, while they are positively related with with tree age, altitude, and drainage. The annual ring width was also negatively correlated with tree age, altitude, drainage, DBH, and tree height. However, anatomical characteristics of wood did not show much variation depending on the provincial regions. These results brought a conclusion that Quercus serrata in southern region could be useful forest resources for the utilization of wood.

• Polymer(Korea)
• /
• v.35 no.2
• /
• pp.124-129
• /
• 2011

Wood plastic composites (WPCs) are attracting a lot of interest recently. In this study, wood flour/polyethylene (PE) composites panels comprised of a coupling agent and nanoclay were prepared by melt-blending followed by compression molding. Five maleic anhydride grafted polyethylene (MAPE) coupling agents were tested, and the best choice and its optimum content were determined. The mechanical properties of the WPCs were measured by UTM, and the thermal properties were measured by TGA, DMA, DSC, and TMA. Adding just a small amount (1 phr) of organoclay made the tensile and flexural strength and the crystallinity of the WPC somewhat increase and the storage modulus and dimensional stability of the WPC largely increase. SEM images showed that the coupling agent drastically improved wood flour/PE interfacial bonding. Selecting the best coupling agent optimized content and adding a small amount of organoclay resulted in a high performance wood flour/PE composite.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.1
• /
• pp.1-9
• /
• 2012

Densified fuels from biomass are widely used in North America and Europe as a regenerable and clean bioenergy. In this study, the fuel characteristics and densification characteristics of Japanese larch and Hyunsasi poplar were studied using a piston-type briquetting machine. The effects of pressure, pressure holding time, species, and particle size on briquette characteristics were studied. At room temperature, the highly densified briquettes of Japanese larch and Hyunsasi poplar can be produced at a compression pressure of 110~170 MPa. The produced briquettes have densities between 0.66 and 0.94 g/$cm^3$ after 28 days of storage at room temperature. The optimum pressure holding time was found to be 12 seconds. There is a linear increase in pressure with increase in density. The densities of briquettes from Japanese larch were higher than those of briquettes from Hyunsasi poplar. Also, the coarser particle size resulted in higher densities in briquettes than the finer particle size.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.2
• /
• pp.88-99
• /
• 1997

뉴질랜드산(産) 라디아타소나무의 수간(樹幹) 및 지재(枝材)에 발달(發達)되어 있는 압축이상재(壓縮異常材), 대응재(對應材) 및 측면재(側面材)의 해부학적(解剖學的) 특성(特性)을 광학현미경(光學顯微鏡), 주사전자현미경(走射電子顯微鏡) 그리고 투과전자현미경(透過電子顯微鏡)을 이용하여 조직학적(組織學的) 및 구성요소(構成要素)의 수량적(數量的) 측면(側面)에서 비교(比較), 검토(檢討) 하였다. 조직학적(組織學的)인 면(面)에서 볼 때 춘재(春材)로부터 추재(秋材)로의 가도관(假導管) 이행(移行)은 대응재(對應材)나 측면재(側面材)보다 압축이상재(壓縮異常材)가 훨씬 더 점진적(漸進的)이었다. 편심생장(偏心生長)으로 인해 연륜폭(年輪幅)은 압축이상재(壓縮異常材)가 가장 컸고 그 다음이 측면재(側面材) 및 대응재(對應材)의 순이었으며 추재솔(秋材率) 역시 압축이상재(壓縮異常材)가 대응재(對應材) 및 측면재(側面材)보다 컸다. 횡단면상(橫斷面上) 가도관(假導管) 형상면(形狀面)에서 압축이상재(壓縮異常材)가 원형(圓形)을 나타내는 반면 대응재(對應材)와 측면재(側面材)는 각형(角形)을 띠고 있었다. 또한 압축이상재(壓縮異常材)에서만 가도관(假導管)의 세포벽(細胞壁)에 나선강(螺旋腔)과 나선열(螺旋裂) (helical cavity and check), 슬릿(slit)형(形) 벽공구(壁孔口)가 존재(存在)하였으나 $S_3$층(層)이 결여(缺如)되어 있었으며 굴곡(屈曲)된 선단(先端)과 불규칙(不規則)한 형상(形狀)의 가도관(假導管) 및 세포간극(細胞間隙)이 자주 관찰(觀察)되었다. 직교분야(直交分野) 벽공(壁孔)은 압축이상재(壓縮異常材)가 가문비나무형(型) 그리고 대응재(對應材) 및 측면재(側面材)는 소나무형(型) 벽공(壁孔)을 나타냈다. 수량적(數量的) 특성(特性) 면에서 볼 때 가도관(假導管)의 길이는 압축이상재(壓縮異常材)가 가장 짧고 측면재(側面材)가 가장 길었으며 가도관(假導管)의 벽(壁) 두께는 압축이상재(壓縮異常材)가 대응재(對應材)나 측면재(側面材)보다 두꺼웠다. 수직수지구(垂直樹脂溝)는 대응재(對應材)가 그리고 수평수지구(水平樹脂溝)(방추형(紡錐形) 방사조직(放射祖織))는 압축이상재(壓縮異常材)의 쪽이 많았다. 결론적(結論的)으로 보면 라디아타소나무의 압축이상재(壓縮異常材)는 근본적으로 대응재(對應材)나 측면재(側面材)와는 상이(相異)한 특성(特性)을 지녔으나 대응재(對應材)와 측면재(側面材)는 거의 유사(類似)한 특성(特性)을 공유(共有)하는 것으로 밝혀졌다.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.310-317
• /
• 2013

This research has been carried out to evaluate the durability characterization of larch wood used for woody erosion control dam. Wood deterioration and strength properties were analyzed according to installed position and duration. Optical and scanning electron microscope were used for examining wood deterioration, and an universal testing machine was applied for compression and shearing strength. As a result, deposited wood in water was maintained almost similar anatomical and physical properties compare to normal wood, even though it was used for seven years. In non-deposited wood which was installed on the side of the dam, heartwood did not show any significant change during seven years, while sapwood was significantly deteriorated in five years. Also, strength properties of sapwood were significantly decreased according to installed duration whereas, degree of decrease in heartwood were relatively smaller than that in sapwood.

• Mycobiology
• /
• v.46 no.2
• /
• pp.138-146
• /
• 2018

Two-hundred and fifty-five strains of actinomycetes isolated from soil samples were screened for their antagonistic activities against four well-known wood decay fungi (WDF), including a brown rot fungus, Gloeophyllum trabeum and three white rot fungi Donkioporia expansa, Trametes versicolor, and Schizophyllum commune. A dual culture assay using culture media supplemented with heated or unheated culture filtrates of selected bacterial strains was used for the detection of their antimicrobial activity against four WDF. It was shown that Streptomyces atratus, S. tsukiyonensis, and Streptomyces sp. greatly inhibited the mycelial growth of the WDF tested compared with the control. To evaluate the biocontrol efficacy of S. atratus, S. tsukiyonensis, and Streptomyces sp., wood blocks of Pinus densiflora inoculated with three selected Streptomyces isolates were tested for weight loss, compression strength (perpendicular or parallel to the grain), bending strength, and chemical component changes. Of these three isolates used, Streptomyces sp. exhibited higher inhibitory activity against WDF, especially G. trabeum, as observed in mechanical and chemical change analyses. Scanning electron microscopy showed that cell walls of the wood block treated with Streptomyces strains were thicker and collapsed to a lesser extent than those of the non-treated control. Taken together, our findings indicate that Streptomyces sp. exhibits the potential to be used as a biocontrol agent for wood decay brown rot fungus that causes severe damage to coniferous woods.