• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권3호
• /
• pp.471-489
• /
• 2013

Data compression at the transport layer could both reduce transmitted bytes over network links and increase the transmitted application data (TCP PDU) in one RTT at the same network conditions. Therefore, it is able to improve transmission efficiency on Internet, especially on the networks with limited bandwidth or long delay links. In this paper, we propose an on-the-fly TCP data compression scheme, i.e., the TCPComp, to enhance TCP performance. This scheme is primarily composed of the compression decision mechanism and the compression ratio estimation algorithm. When the application data arrives at the transport layer, the compression decision mechanism is applied to determine which data block could be compressed. The compression ratio estimation algorithm is employed to predict compression ratios of upcoming application data for determining the proper size of the next data block so as to maximize compression efficiency. Furthermore, the assessment criteria for TCP data compression scheme are systematically developed. Experimental results show that the scheme can effectively reduce transmitted TCP segments and bytes, leading to greater transmission efficiency compared with the standard TCP and other TCP compression schemes.

• Geomechanics and Engineering
• /
• 제37권4호
• /
• pp.371-382
• /
• 2024

Measurement or prediction of compression index (C_c) of soils is essential for assessment of total and differential settlement of structures. It is a well-known fact that this parameter is controlled by several index identifiers of soil including initial void ratio, Atterberg limits, overconsolidation ratio, specific gravity, etc. Many studies in the past proposed relationships for prediction of C_c based on different index properties. Therefore, this study aims to present a comparison of previously proposed equations for estimation of C_c. Data from literature was compiled, and a total of 90 and 623 test results on remolded and undisturbed specimens were used to question the validity of previously proposed equations. Nevertheless, the modeling ability of 7 and 12 equations for estimation of C_c of remolded and undisturbed soils were questioned by use of compiled data. Moreover, new empirical relationships based on initial void ratio and toughness limit for prediction of C_c was proposed by use of nonlinear multivariable regression and evolutionary based regression analyses. The results are promising-the performances of models established are quite acceptable, which are verified by statistical analyses.

• Journal of the Korean Wood Science and Technology
• /
• 제48권4호
• /
• pp.450-457
• /
• 2020

Single pellet press technology allows for fast, low-cost, and small-scale tests to investigate pelletizing characteristics. We estimated proper compression ratios for five Korean domestic wood species through predicted relationships between pelletizing pressure P_x and compression ratio based on experimental data obtained from a single pellet press unit. The pressures required to obtain a 6-mm-diam pellet of density 1200 kg/㎥ were estimated as 111 MPa for Populus davidiana, 133 MPa for Robinia pseudoacacia, 136 MPa for Quercus mongolica, 97 MPa for Pinus densiflora, and 127 MPa for Pinus rigida. On the basis of these pressures, we estimated proper compression ratios to be within the range 7.676-8.410 for these species, and we found the compression ratios needed for hardwood species to be somewhat higher than those needed for softwood species to obtain the pellet density of 1200 kg/㎥.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1098-1101
• /
• 2004

The ordinary stereo image of an object consists of data of left and right views. Therefore, the left and right image pairs have to be transmitted simultaneously in order to display 3-dimentional video at the remote site. However, due to the twice data in comparing with a monoscopic image of the same object, it needs to be compressed for fast transmission and resource saving. Hence, it needs an effective coding algorithm for compressing stereo image. It was found previously that compressing left and right frames independently will achieve the compression ratio lower than compressing by utilizing the spatial redundancy between both frames. Therefore, in this paper, we study the stereo image compression technique based on the multiresolution wavelet transform using varied disparity-block size for estimation and compensation. The size of disparity-block in the stereo pair subbands are scaling on a coarse-to-fine wavelet coefficients strategy. Finally, the reference left image and residual right image after disparity estimation and compensation are coded by using SPIHT coding. The considered method demonstrates good performance in both PSNR measures and visual quality for stereo image.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.1020-1026
• /
• 2016

Motion estimation (ME) algorithms supporting quarter-pixel accuracy have been recently introduced to retain detailed motion information for high quality of video in the state-of-the-art video compression standard of H.264/AVC. Conventional sub-pixel ME algorithms in the spatial domain are faced with a common problem of computational complexity because of embedded interpolation schemes. This paper proposes a low-complexity sub-pixel motion estimation algorithm in the transform domain utilizing shifting matrix. Simulations are performed to compare the performances of spatial-domain ME algorithms and transform-domain ME algorithms in terms of peak signal-to-noise ratio (PSNR) and the number of bits per frame. Simulation results confirm that the transform-domain approach not only improves the video quality and the compression efficiency, but also remarkably alleviates the computational complexity, compared to the spatial-domain approach.

• 한국강구조학회 논문집
• /
• 제13권3호
• /
• pp.223-232
• /
• 2001

본 연구에서는 높은 축력을 받는 기둥재에 사용 가능성이 큰 고장력 용접구조용 압연강재인 SM570의 압축좌굴내력을 평가하기 위해서 중심압축실험을 실시하였다. 단 주압축 실험결과 강구조 계산규준이 정하고 있는 판폭두께비의 제한치를 만족시키는 기둥부재의 최대내력은 국부좌굴에 의해 결정되며, 판폭두께비의 제한치를 만족시키지는 못하는 경우에는 최대내력이 도달하기 전에 국부좌굴에 의해서 급격히 저하하였다. 또한 압축 좌굴내력이 SM570 강재의 설계기준값인 $4.1tonf/cm^2$보다 높게 나타났다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제2B권3호
• /
• pp.125-132
• /
• 2002

PMSMS (permanent magnet synchronous motors) are widely used in industrial applications and home appliances because of their high torque to inertia ratio, superior power density, and high efficiency. For high performance control, accurate informations about the rotor position is essential. Sensorless algorithms have lately been studied extensively due to the high cost of position sensors and their low reliability in harsh environments. A novel position sensorless speed control for PMSMs uses indirect flux estimation and is presented in this paper. Rotor position and angular velocity are estimated by the proposed indirect flux estimation. Linkage flux and magnetic field flux are calculated by the voltage equations and the measured phase current without any integration. Instead of linkage flux calculation with integral operation, indirect flux and differential magnetic field are used for the estimation of rotor position. A proper rejection technique fur current noise effect in the calculation of differential linkage flux is introduced. The proposed indirect flux detecting method is free from the integral rounding error and linkage flux drift problem, because differential linkage flux can be calculated without any integral operation. Furthermore, electrical parameters of the PMSM can be measured by the proposed TCM (time compression method) for soft starting and precise estimation of rotor position. The position estimator uses accurate electrical parameters that are obtained from the proposed TCM at starting strategy. In the operating region, a proper compensation method fur temperature effect can compensate fir the estimation error from the variation of electrical parameters. The proposed novel position sensorless speed control scheme is verified by the experimental results.

• 한국인쇄학회지
• /
• 제20권1호
• /
• pp.28-44
• /
• 2002

Wavelet transformation in image compression is to offer higher image compressibility and high-quality by quantization and entropy encoding. More image quality is good that reconstructed image by wavelet calculation than acquire cosine transform. Therefore, wavelet itself is function if it is wavelet's feature, in this function, do processing applying difference scale and resolution. That is, this is not that fixed resolution has been decided like existent compression way, when it regulated scale, damage goes in pixel and picture looks like break without giving damage entirely in reflex even if magnify or curtail Decoding. Therefore, this paper is in Image that using new wavelet application compression way research that see applies comparing In each image noted this time compressing step by step with circle image compression efficiency recognize. Also, estimated quality pass through by printing of compressed image, investigated compression ratio of most suitable that get print of high quality and elevation of transmission speed.

• Geomechanics and Engineering
• /
• 제19권4호
• /
• pp.353-360
• /
• 2019

The elastic modulus is an important parameter to characterize the property of rock. It is common knowledge that the strengths of rocks are significantly different under tension and compression. However, little attention has been paid to the bi-modularity of rock. To validate whether the rock elastic moduli in tension and compression are the same, Brazilian disc, direct tension and compression tests were conducted. A horizontal laser displacement meter and a pair of vertical and transverse strain gauges were applied. Four types of materials were tested, including three types of rock materials and one type of steel material. A comprehensive comparison of the elastic moduli based on different experimental results was presented, and a tension-compression anisotropy model was proposed to explain the experimental results. The results from this study indicate that the rock elastic modulus is different under tension and compression. The ratio of the rock elastic moduli under compression and tension ranges from 2 to 4. The rock tensile moduli from the strain data and displacement data are approximate. The elastic moduli from the Brazilian disc test are consistent with those from the uniaxial tension and compression tests. The Brazilian disc test is a convenient method for estimating the tensile and compressive moduli of rock materials.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.519-528
• /
• 2016

In order to achieve fast computational speed with good visual quality of output video, we propose a frequency domain based new fractal video compression scheme. Normalized cross correlation is used to find the structural self similar domain block for the input range block. To increase the searching speed, cross correlation is implemented in the frequency domain using FFT with one computational operation for all the domain blocks instead of individual block wise calculations. The encoding time is further minimized by applying rotation and reflection DFT properties to the IFFT of zero padded range blocks. The energy of overlap small size domain blocks is pre-computed for the entire reference frame and retaining the energies of the overlapped search window portion of previous adjacent block. Quadtree decompositions are obtained by using domain block motion compensated prediction error as a threshold to control the further partitions of the block. It provides a better level of adaption to the scene contents than fixed block size approach. The result shows that, on average, the proposed method can raise the encoding speed by 48.8 % and 90 % higher than NHEXS and CPM/NCIM algorithms respectively. The compression ratio and PSNR of the proposed method is increased by 15.41 and 0.89 dB higher than that of NHEXS on average. For low bit rate videos, the proposed algorithm achieve the high compression ratio above 120 with more than 31 dB PSNR.