• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.12
• /
• pp.945-952
• /
• 2015

The autoignition characteristics of biosyngas were investigated both numerically and experimentally. The effects of the temperature, gas composition, and pressure on the autoignition characteristics were evaluated. A shock tube was employed to measure the ignition delay times of the biosyngas. The numerical study on the ignition delay time was performed using the CHEMKIN-PRO software to validate the experimental results and predict the chemical species in the combustion process. The results revealed that the ignition delay time increased with an increase in the hydrogen fraction in the mixture. Under most temperature conditions, the ignition delay time decreased with a pressure increase. However, the ignition delay time increased with an increase in pressure under relatively low temperature conditions.

• Journal of Internet Computing and Services
• /
• v.12 no.4
• /
• pp.45-50
• /
• 2011

In this paper, the encoding time delay of FH/TDD(Frequency Hopping/Time Division Duplex) based Motion JPEG image compression CODEC is analyzed for radio video transmissions of multi-camera systems in a vehicle. And, Synchronized connection of minimum channel collision is designed with synchronized shift and access according to channel status for Motion JPEG based FH/TDD multiple access.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.1
• /
• pp.24-29
• /
• 2004

In ocean acoustic tomography (OAT), the pulse compression techniques using M-sequences are employed in the many studies for investigating the ocean structures. M-sequences can provide the good time and Doppler resolution in the process of demodulation using matched-filter. The signal-to-noise (SNR) performance at the output of receiver may be improved by manipulating received signal, i. e. coherently averaging. The processing time can be significantly reduced by using fast hadarmard transform (FHT) or fast Fourier transform (FFT). In this paper, we estimate the multipath arrival structures and delay times using the East Korean Sea experiment data and explore the compensation method for the detrimental effects on performance due to sampling rate error. We also analyze the characteristics of the ocean acoustic channels through scattering function, delay power profile, and time dispersions.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3E
• /
• pp.84-94
• /
• 2008

Displacement estimation is a crucial step in ultrasonic strain imaging. The displacement between a pre- and postcompression signal in the current data window is estimated by first shifting the postcompression signal by the displacement obtained in the previous data window to reduce their decorrelation and then determining the remaining part of the displacement through autocorrelation and conversion of phase difference into time delay. However, since strain image quality tends to vary with the amount of compression applied, we propose two new methods for enhancing strain image quality, i.e., displacement normalization and adaptive persistence. Both in vitro and in vivo experiments are carried out to acquire ultrasound data and produce strain images in real time under the application of quasi static compression. The experimental results demonstrate that the methods are quite effective in improving strain image quality and thus can be applied to implementing an ultrasound elasticity imaging system that operates in real time.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.931-936
• /
• 2006

This paper presents different issues of the real-time compression algorithms without compromising the video quality in the distributed environment. The theme of this research is to manage the critical processing stages (speed, information lost, redundancy, distortion) having better encoded ratio, without the fluctuation of quantization scale by using IP configuration. In this paper, different techniques such as distortion measure with searching method cover the block phenomenon with motion estimation process while passing technique and floating measurement is configured by discrete cosine transform (DCT) to reduce computational complexity which is implemented in this video codec. While delay of bits in encoded buffer side especially in real-time state is being controlled to produce the video with high quality and maintenance a low buffering delay. Our results show the performance accuracy gain with better achievement in all the above processes in an encouraging mode.

• Elastomers and Composites
• /
• v.47 no.4
• /
• pp.341-346
• /
• 2012

Injection molding is one of the widely used polymer processing operations. It is being used for not only conventional injection molding but gas injection molding, water injection molding, and injection compression molding. Injection compression molding involves injection and compression operation, and it gives uniform physical property and high dimensional quality of product. In this study, injection compression characteristics for various product shapes have been investigated by computer simulation. Product containing side wall showed not much effective in injection compression molding since wall thickness direction was perpendicular to the compression direction. Uniform and low shrinkage was observed in injection compression molding comparing conventional injection molding. Subsequently injection compression molding can be used for molding precise product. Optimal injection compression molding condition was obtained using design of experiment for plastic lens and the results were compared with conventional injection molding.

• ETRI Journal
• /
• v.29 no.1
• /
• pp.116-119
• /
• 2007

In this letter, we design a collision resolution protocol for optical burst switching ring networks to avoid burst collision. We define the offset time condition for no burst transmission collision and manage the free time list of nodes for no burst reception collision. In order to improve the throughput, we use a fiber delay line, void-filling, and void-compression. This protocol does not require any additional procedures for bandwidth reservation such as centralized assignment of bandwidth, lightpath setup of WDM ring networks, or token capturing for the burst transmission. The simulation results show that the proposed protocol can achieve high throughput while saving 70% of wavelengths when compared to round robin with random selection, round robin with persistent, and round robin with non-persistent with only destination delay.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.3
• /
• pp.345-354
• /
• 2004

In these days, such services are popularized as E-commerce, E-government, multimedia services, and home networking applications. Most web traffics generated contemporarily basically use the Hyper Text Transfer Protocol(HTTP). Unfortunately, the HTTP is improper for these applications that comprise significant components of the web traffics. In this paper, we introduce a real-time contents compression architecture that maximizes the web service performance as well as reduces the response time. This architecture is built into the linux kernel-based web accelerating module. It guarantees not only the freshness of compressed contents but also the minimum time delay using an server-state adaptive algorithm, which can determine whether the server sends the compressed message considering the consumption of server resources when heavy requests reach the web server Also, We minimize the CPU overhead of the web server by exclusively implementing the compression kernel-thread. The testing results validates that this architecture saves the bandwidth of the web server and that elapsed time improvement is dramatic.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.781-786
• /
• 2004

In these days, such services are popularized as E-commerce, E- government, multimedia services, and home networking applications. Most web traffics generated contemporarily basically use the Hyper Text Transfer Protocol(HTTP). Unfortunately, the HTTP is improper for these applications that comprise significant components of the web traffics. In this paper, we introduce a real-time contents compression architecture that maximizes the web service performance as well as reduces the response time. This architecture is built into the linux kernel-based web accelerating module. It guarantees not only the freshness of compressed contents but also the minimum time delay using an server-state adaptive algorithm, which can determine whether the server sends the compressed message considering the consumption of sewer resources when heavy requests reach the web server. Also, We minimize the CPU overhead of the web server by exclusively implementing the compression kernel-thread. The testing results validates that this architecture saves the bandwidth of the web server and that elapsed time improvement is dramatic.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1100-1106
• /
• 2009

Recently, there are quite a lot of attention is drown on the researches related to of Miller method applied high expansion cycle. For this study, high expansion cycles are formed and analyzed with the base view point of thermodynamics, and the features of each factors are also investigated. As a result of analysis, the expansion-compression ratio is expected with a decrease of effective compression ratio as intake valve closing time retarded, however, the decrease of mean effective pressure and its output is accompanied with the counterflow of intake air. Accordingly, as the consequence of such failure, it is expected that an alternative is needed for the realization of high expansion cycles, and the improvement over thermal efficiency. To materialize such cycle, the control system to delay the closing time of intake valve was designed and VVT, the 3 S/B low speed diesel engine, is applied to evaluate the efficiency. The result of the trial shows that there was no significant errors.