• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.3
• /
• pp.222-228
• /
• 1995

Mechanical alloying behaviour was investigated after adding 6, 8, 12wt% Fe powder into A1 matrix, respectively, in order to develop Al alloy. And the mechanical characteristics of the alloy which was produced by the above method were studied. The hardness and ultimata tensile strength of the material with different compositions were found to be increased with annealing temperatures and holding times. Intermetallic compound of $Al_3Fe$ and carbide of $Al_4C_3$ phases, which were generated from the different compositions during annealing, were found. It was suggested that enhancement of mechanical properties of Al-Fe alloy system was due to the presence of these preapitates that constrained grain growth and blocked dislocation movement in the alloy system.

• Rapid Communication in Photoscience
• /
• v.3 no.4
• /
• pp.64-66
• /
• 2014

Synthesis of a deuterium-labeled derivative of nitrospirobenzopyran (NSP), one of representative photochromic compounds, has been described. Four deuteriums were successfully introduced on 1-methyl and ${\alpha}$-methyne relative to spiro-carbon in the title compound with more than 95atom%D purity. Main photodegraded products of NSP were two oxindoles in acetonitrile, and additional products were formed in poly(isobutyl-methacrylate) films possibly due to restricted molecular motion in polymer matrix. Quantitative HPLC analysis revealed that partial introduction of deuterium to NSP brought a noticeable isotope effect, recognizable enhancement in photo-resistivity of NSP, i.e.,8.3% in solutions and 29% in polymeric films.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.173-178
• /
• 2001

The materials processing factors such as remelting and casting, heat treatment and microstructure, sheet rolling and can body forming in the aluminum can-to-can recycling procedure have been investigated. Aluminum used beverage can(UBC) was remelted together with virgin aluminum. The ceramic filter was used during casting to remove large impurities. As-cast microstructure was composed of large intermetallic compound (mainly $\beta$ -phase) distributed in the aluminum matrix. By heat treatment, $\beta$ -phase was transformed to $\alpha$ -phase which was also formed from $Mg_2$Si particles. The heat treated ingots were hot-rolled at 48$0^{\circ}C$ and cold-rolled to thin sheets. Can making from this thin sheets was successful and earing was measured after can making. There was a critical cold reduction rate for minimum earing. Some cracks were initiated from the impurity particles which was not removed during filtering.

• Journal of Aerospace System Engineering
• /
• v.2 no.3
• /
• pp.1-6
• /
• 2008

The tilt rotor aircraft has the flight characteristics which takes off vertically like a helicopter and flies forward like an airplane. Especially, the transition process from a helicopter to an airplane mode requires not only the mixing of control inputs but also the stability and controllability augmentation system(SCAS) in order to keep the safe flight because there are compound flight dynamic characteristics of a helicopter and an airplane including non-linearity, uncertainty. This paper describes the design of SCAS in a lateral motion for the tilt rotor aircraft based on the $H_{\infty}$ control method, which was performed from mathematical model with weighting matrix based on the relationship between the $H_{\infty}$ norm and the sensitivity function. Through simulation analysis for the controller designed on the $H_{\infty}$ control theory, it was shown that this method may be applied to the control design of the tilt rotor aircraft.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.2
• /
• pp.27-34
• /
• 1997

Naphthoquinone-1,2-diazide-5-sulfonyl [NDS]derivatives members of Quinone diazide compound that are utilizable as photoresist for printing plate were synthesized, and photoresist were prepared by mixing these derivatives with a matrix resin(PF, CF) at various weight ratios. Photosensitive characteristics of photoresist were studied by Gray scale method, and SEM to analyze if they can be used as photosensitive material in a printing plate. Experimental results showed using IR, UV, NDS derivatives were photoconverted and developer-soluble photoresist were produced. Photoresist in the mixing ratio of 1:4 of NDS[II] and CF resin gave rise to the highest dissolution rate. In addition, photoresist obtained at this condition resulted in the most superior sensitivity.

• Journal of Welding and Joining
• /
• v.30 no.5
• /
• pp.27-33
• /
• 2012

Friction stir processing (FSP), developed based on the basic principles of friction stir welding(FSW), a solid-state joining process originally developed for various metal alloys, is an emergingmetalworking technique that can provide localized modification and control of microstructures in near-surface layers of processed metallic components. The FSP causes intense plastic deformation, material mixing, and thermal exposure, resulting in significant microstructural refinement, densification, and homogeneity of the processed zone. The FSP technique has been successfully used for producing the fine-grained structure and surface composite, modifying the microstructure of materials, and synthesizing the composite and intermetallic compound in situ. In this review article, the current state of the understanding and development of FSP is addressed.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.664-670
• /
• 2014

The effects of different filling materials and stabilizers in polymer based materials that are used as shoe soles in the shoemaking industry on the mechanical properties (strength, failure, tensile, tearing, bending etc.) of the final products have been examined in this study. Natural rubber (NR RSS3) and styrene-butadiene rubber (SBR 1502) were used as the main matrix material. New compounds were formed by replacing the fillings in the general compound of the existing factory ($SiO_2$, $CaCO_3$) with 40% (1200 g) blast furnace flue dust, rice husk, reclaimed rubber (recycled) and wood ash. Comparison of the new compounds with the existing compounds revealed a decrease in hardness, density, dimension stability, bending, tearing, % elongation and failure strength and an increase in wearing.

• Journal of Powder Materials
• /
• v.6 no.1
• /
• pp.49-55
• /
• 1999

Al-Cr-Zr nanocomposite metal powders were prepared by mechnical alloying (MA) in order to develop aircraft structure materials with lighter weight and lower cost than the conventional Ti and Ni alloys. The morphological changes and microstrutural evolution of Al-6wt.%Cr-3wt.%Zr nanocomposite metal powders during MA were investigated by SEM, XRD and TEM. The approximately 50$\mu$m sized Al-Cr-Zr nanocomposite metal powders has been formed after 20 h of MA. The individual X-ray diffraction peaks of Al, Cr and Zr were broadened and peak intensitied were decreased as a function of MA time. The observed Al crystallite size by TEM was in the range of 20 nm, which is a simliar value calculated by Scherrer equation. The microhardness of Al-Cr-Zr nanocomposite metal powders increases alomost linearly with increase of the processing time, reaching a saturation hardness value of 127 kg/$mm^2$ after 20 h of processing. The intermetallic compound phase of $Al_3Zr_4$ in the matrix was identifed by XRD and TEM.

• Archives of Pharmacal Research
• /
• v.25 no.1
• /
• pp.25-27
• /
• 2002

The crystal structure of KR-21042, N-(3-Phenylpropyl )-4-hydroxy-3-methoxyphenylacetamide, was determined by single crystal X-ray diffraction analysis. The compound was recrystallized from a mixture of ethylacetate and n-hexane in monoclinic, space group $P2_1/c$, with a = 16.622(1), b = 6.215(1), c = 15.802(1) ${\AA},{\;}{\beta}=104.97(1)$, and Z = 4 The calculated density is $1.261{\;}g/cm^3$The structure was solved by the direct method and refined by full matrix least-squares procedure to the fecal R value of 0.068 for 2332 observed reflections.

• Journal of Power Electronics
• /
• v.14 no.5
• /
• pp.1028-1037
• /
• 2014

To optimize controller design and improve static and dynamic performances of three-phase four-leg inverter systems, a compound control method that combines state feedback and quasi-sliding mode variable structure control is proposed. The linear coordinate change matrix and the state variable feedback equations are derived based on the mathematical model of three-phase four-leg inverters. Based on system relative degrees, sliding surfaces and quasi-sliding mode controllers are designed for converted linear systems. This control method exhibits the advantages of both state feedback and sliding mode control. The proposed controllers provide flexible dynamic control response and excellent stable control performance with chattering suppression. The feasibility of the proposed strategy is verified by conducting simulations and experiments.