Browse > Article
http://dx.doi.org/10.7317/pk.2014.38.5.664

Effect of Changing of Filling Materials in NR-SBR Type Elastomer Based Rubber Materials on Mechanical Properties  

Bulbul, Saban (Karabuk University, Institute of Science)
Yasar, Mustafa (Karabuk University, Faculty of Technology)
Akcakale, Nuretttin (Abant zzet Baysal University, Gerede Vocational High School)
Publication Information
Polymer(Korea) / v.38, no.5, 2014 , pp. 664-670 More about this Journal
Abstract
The effects of different filling materials and stabilizers in polymer based materials that are used as shoe soles in the shoemaking industry on the mechanical properties (strength, failure, tensile, tearing, bending etc.) of the final products have been examined in this study. Natural rubber (NR RSS3) and styrene-butadiene rubber (SBR 1502) were used as the main matrix material. New compounds were formed by replacing the fillings in the general compound of the existing factory ($SiO_2$, $CaCO_3$) with 40% (1200 g) blast furnace flue dust, rice husk, reclaimed rubber (recycled) and wood ash. Comparison of the new compounds with the existing compounds revealed a decrease in hardness, density, dimension stability, bending, tearing, % elongation and failure strength and an increase in wearing.
Keywords
NR-SBR; rubbers; mechanical properties; fillings; elastomer;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 D. Derouet, C. Nakason, P. Intharapat, Q. N. Tran, F. Gohier, and C. Nakason, Eur. Polym. J., 45, 820 (2009).   DOI   ScienceOn
2 N. Akcakale, Philosopher of Doctorate Thesis, Sakarya University (2008).
3 M. Denac, V. Musil, and I. Smit, Compos. Part A, 36, 1282 (2005).   DOI
4 A. Khalil, N. S. Sirajuddin, and R. Z. Nudrat, J. Adv. Res., 5, 165 (2014).   DOI
5 C. Kumnuantip and N. Sombatsompop, Mater. Lett., 57, 3167 (2003).   DOI   ScienceOn
6 Y. M. ahin, Masters of Science Thesis, Bogazici University (2001).
7 O. T. Savasci, N. Uyanik, and G. Akovali, Plastics and Plastic Technology, Cantay Publishing, stanbul, 1998.
8 M. N. Ichazo, M. Hermandez, C. Albano, and J. Gonzales, Proc. of the 8th Polym. of Adv. Tech. Int. Sym., Budapest, Hungary, p. 13 (2005).
9 M. Sumaila, B. I. Ugheoke, L. Timon, and T. Oloyede, Leonardo J. Sci., 5, 159 (2006).
10 N. Akcakale, A. Demirer, E. Nart, and I. Ozsert, Academic Journals, 58, 758 (2010).
11 T. P. Mohan, J. Kuriakose, and K. Kanny, J. Ind. Eng. Chem., 17, 264 (2011).   DOI   ScienceOn
12 F. S. Jolene, R. C. R. Nunes, and V. J. R. R. Pita, Rheological Behavior of Mineral Fillers in Shoe Soles Composites, Universidad Federal do Rio, RJ, Brazil, 2000.
13 S. Pasertsri, F. Lagarde, N. Rattanasom, C. Sirisinha, and P. Daniel, Polym. Test., 32, 852 (2013).   DOI
14 D. E. El-Nashar, E. A. M. Youssef, and M. A. Abd El-Ghaffar, Mater. Design, 31, 1350 (2010).   DOI
15 T. P. Mohan, J. Kuriakose, and K. Kanny, J. Ind. Eng. Chem., 18, 979 (2012).   DOI
16 X. Ge, M. C. Le, and U. R. Cho, Polymer(Korea), 38, 16 (2014).
17 K. Joseph, S. Thomas, and C. Pavithran, Polymer, 37, 5139 (1996).   DOI   ScienceOn
18 J. Sharifa, W. M. Z. W. Yunus, K. Z. H. M. Dahlan, and M. H. Ahmad, Polym. Test., 242, 211 (2005).
19 U. Basuli, G. B. Lee, S. Y. Jang, J. Oh, J. H. Lee, S. C. Kim, N. D. Jeon, Y. I. Huh, and C. Nah, Elast. Compos., 47, 297 (2012).   DOI
20 K. J. Kim and J. V. Kool, Elastomer, 39, 263 (2004).
21 C. B. Bucknall, S. G. Aggarwal, G. Allen, and J. C. Bevington, Editors, in Comprehensive Polymer Science, Pergamon, Oxford, England, Vol 7, p 27 (1989).
22 N. Akcakale, A. Demirer, and . Ozsert, 6th International Advanced Technologies Symposium, Elazig, Turkey, p. 314 (1998).
23 S. S r wardena, H. Ismail, and U.S. Ish aku, The Effect of Filler Loading And Curing Agent Concentrastion On Rheoligal Properties of Polypropylene/Ethylene-Propylene-D ene-Terpolymer/ With Rice Husk Ash Thermoplastic Elastomer Ternary Composites, University Sains, Malaysia, 2001.
24 Y. Lu, L. Liu, M. Tian, H. Geng, and L. Zhang, Eur. Polym. J., 41, 589 (2005).   DOI   ScienceOn
25 L. E. Nielsen, Editor, Mechanical Properties of Polymers and Composites, Marcel Dekker, Inc., New York, Vol 2 (1974).
26 J. W. Lee, H. S. Joo, S. C. Kang, and Y. W. Chang, Elastomer, 41, 245 (2006).