• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.1
• /
• pp.103-109
• /
• 2019

Objective: Ensiling of tannin-rich fruit byproducts (FB) involves quantitative and qualitative changes in the tannins, which would consequently change the rumen fermentation characteristics. This study aimed to evaluate whether ensiled FBs are effective in mitigating methane emission from ruminants by conducting in vitro assessments. Methods: Fruit byproducts (grape pomace, wild grape pomace, and persimmon skin) were collected and subjected to four-week ensiling by Lactobacillus buchneri inoculant. A defined feed component with or without FB samples (both fresh and ensiled material) were subjected to in vitro anaerobic culturing using rumen fluid sampled from beef cattle, and the fermentation parameters and microbial populations were monitored. Results: Reduced methane production and a proportional change in total volatile fatty acids (especially enhanced propionate proportion) was noted in bottles containing the FBs compared with that in the control (without FB). In addition, we found lower gene copy number of archaeal 16S rRNA and considerably higher levels of one of the major fibrolytic bacteria (Fibrobacter succinogenes) in the bottles containing FBs than in the control, particularly, when it was included in a forage-based feed. However, in the following cultivation experiment, we observed that FBs failed to exhibit a significant difference in methane production with or without polyethylene glycol, implying that tannins in the FBs may not be responsible for the mitigation of methane generation. Conclusion: The results of the in vitro cultivation experiments indicated that not only the composition but also ensiling of FBs affected rumen fermentation patterns and the degree of methane generation. This is primarily because of the compositional changes in the fibrous fraction during ensiling as well as the presence of readily fermented substrates, whereas tannins in these FBs seemed to have little effect on the ruminal fermentation kinetics.

• Current Photovoltaic Research
• /
• v.11 no.3
• /
• pp.67-74
• /
• 2023

The earth-abundant element-based Cu₂ZnSn(S,Se)₄ (CZTSSe) thin film solar cells (TFSCs) have attracted greater attention in the photovoltaic (PV) community due to their rapid development in device power conversion efficiency (PCE) >13%. In the present work, we demonstrated the fine-tuning of the bandgap in the CZTSSe TFSCs by altering the sulfur (S) to the selenium (Se) chalcogenide ratio. To achieve this, the CZTSSe absorber layers are fabricated with different S/(S+Se) ratios from 0.02 to 0.08 of their weight percentage. Further compositional, morphological, and optoelectronic properties are studied using various characterization techniques. It is observed that the change in the S/(S+Se) ratios has minimal impact on the overall Cu/(Zn+Sn) composition ratio. In contrast, the S and Se content within the CZTSSe absorber layer gets altered with a change in the S/(S+Se) ratio. It also influences the overall absorber quality and gets worse at higher S/(S+Se). Furthermore, the device performance evaluated for similar CZTSSe TFSCs showed a linear increase and decrease in the open circuit voltage (V_oc) and short circuit current density (J_sc) of the device with an increasing S/(S+Se) ratio. The external quantum efficiency (EQE) measured also exhibited a linear blue shift in absorption edge, increasing the bandgap from 1.056 eV to 1.228 eV, respectively.

• Applied Biological Chemistry
• /
• v.18 no.4
• /
• pp.203-218
• /
• 1975

In order to investigate the compositional change oil composts during the growing of cultivated mushroom (Agaricus bisporus), composts and mushrooms during the period of filling to ending under commercial conditions were subjected to chemical analyses. The results are summarized as follows and the mechanism of composting for mushroom cultivation was proposed. 1) The temperature change of growing bed and room was observed and the yield of mushroom for each cropping time was recorded to get $15.6kg/m^2$ in total crops. 2) Composts after filling showed pH 8.2 which dropped to 6.4 after casing and continued so up to ending. 3) On the dry weight basis of composts, crude ash increased whereas total nitrogen, ether extract and crude fibre decreased gradually to bring about the lowering of organic matter. 4) Total nitrogen of composts decreased gradually and more insoluble nitrogen was lost than soluble nitrogen. The C/N ratio of composts was initially 21 which was gradually lowered to 16. 5) The losses of ${\alpha}-cellulose$, pentosan and lignin in composts were 87%, 75%, and 60%, respectively, in which ${\alpha}-cellulose$ decreased markedly after casing. 6) Free reducing sugars of composts increased continuously. Gradually increased free amino acids till second cropping decreased again thereafter. Composts at the filling stage contained alanine, glutamic acid, glycine and serine in which glycine decreased markedly whereas proline increased remarkably upon mushroom cultivation. 7) Among minerals of composts, phosphorus and zinc tended to decrease, potassium and copper tended to increase anti sodium showed no marked change. 8) In comparison of mushrooms from different cropping time with respect to proximate composition, minerals, free reducing sugars and amino acids, no marked difference was observed. However, a little higher values were observed in crude fat, free reducing sugars and sodium content for early crops and in free amino acids and phosphorus content for late crops. Twelve free amino acids including alanine, serine, threonine, and glutamic acid were detected in the cultivated mushroom. 9) According to above experimental results, it was possible to support the mechanism of compositing that the formation of ammonia and decomposition of carbohydrates by mesophiles are followed by protein biosynthesis, formation of microbial bodies and nitrogen-rich lignin humus complex by thermophiles, thus supplying necessary nutrients for mushroom growth, along with residual carbohydrates.

• Journal of the Korean Ceramic Society
• /
• v.39 no.9
• /
• pp.896-901
• /
• 2002

Since many process parameters of FHD(Flame Hydrolysis Deposition) are involved in forming multi-component amorphous silica film ($SiO_2-B_2O_3-P_2O_5-GeO_2$), it has not been easy to predict the optical, mechanical and thermal properties of deposited film from the simple process parameters, such as source flow rate. Furthermore, the prediction of final composition of film becomes even more difficult after sintering at high temperature due to the evaporation of volatile dopants. The motivation of the study was to clarify the quantitative relationship between simple process parameters such as the flow rate of source gases and resulting chemical composition of sintered film. Hence, the compositional analysis of silica soot by FTIR(Fourier Transformation Infrared Spectroscopy) and ICP-AES(Inductively Coupled Plasma-Atomic Emission Spectrometry) under the control of the amount of dopant was carried out to obtain the quantitative composition. By measuring spectrum of absorbance from FTIR, the compositional change of B-O, Si-O, OH($H_2O$) in silica film was measured. The concentrations of these dopants were also measured by ICP-AES, which were compared with the FTIR result. The final quantitative relationship between simple process parameters and composition was deduced from the comparison between two results.

• Journal of Digital Convergence
• /
• v.12 no.9
• /
• pp.297-312
• /
• 2014

By employing in-depth interviews with a total of 14 television producers, the study seeks to investigate how the use of documentary background music has changed in the rapidly evolving media technology. This study reveals two major findings. First, the use of traditional compositional background music in TV documentary has been decreased for the last 20 years, while library music with various sound sources has been more likely to be used due to its artistic value, its digitalized formats, and its convenience. Second, the popularity of the library music use has changed the cooperative relationship between TV documentary producers and music directors, and their views on background music. Overall, compared to the past, the new media technology (e.g., much easier, faster editing process and communication through e-mails) has helped to come up with the current trend of using more library music. This trend however implies that the dependency of library music only may lose the unique value of television documentary as a work of creative art and eventually downgrade the quality of the programs. Further practical implications are discussed.

• Journal of Environmental Health Sciences
• /
• v.23 no.2
• /
• pp.12-23
• /
• 1997

The biosynthesis of galactolipid, galactose and the fatty acid composition in E. cdi and B. subtills treated with potassium dichromate(PD, 500 ppm, 500 ppm), potassium chromate(PC, 500 ppm, 500 ppm), cobalt chloride(CC, 100 ppm, 10 ppm) and methylmercuric chloride(MC, 100 ppm, 10 ppm) during the culture were analyzed to compare with the control. The growth rate of cells, the contents of monogalactosyldiglyceride(MGDG), digalactosyldiglyceride(DGDG) and total lipid in the metal compound treatments were lower as compared with the control. And too, the contents of galactose utilized for the biosynthesis of galactolipids in these strains in the various metal compounds treatments were inhibited. The fatty acids used for the MGDG and DGDG formation in E. coli and B. subtills treated with each metal compounds during the culture were showed to the variant compositional change.

• Economic and Environmental Geology
• /
• v.26 no.3
• /
• pp.363-370
• /
• 1993

Various sizes of dolerite sills occur in the Mungyong area, one of well-exposed areas in Okchon belt. All of previous geochemical studies concluded that chemical variations of basic rocks, so-called Sangnae-ri amphibolite, result from the fractional crystallization. The second sill, which is a well differentiated one in the Sangnae-ri area, displays systematic compositional variation associated with gradual change of grain size in vertical sections. In order to clarify the chemical variation in the sill, whether chemical composition of each part of the sill is appropriately derived from the original liquid (represented by the average composition) by addition or subtraction of initial phenocystic minerals are tested(Iwamori program, 1989). According to the calculation, it is shown that major vertical chemical variation of the sill resulted from the accumulation of phenocrysts(olivine, clinopyrxoene, plagioclase, titanomagnetite) which already existed at the time of emplacement or formed just after the emplacement.

• Structural Engineering and Mechanics
• /
• v.66 no.4
• /
• pp.505-513
• /
• 2018

Steam flooding is widely used in heavy oil reservoir with coupling effects among the formation temperature change, fluid flow and solid deformation. The effective stress, porosity and permeability in this process can be affected by the multi-physical coupling of thermal, hydraulic and mechanical processes (THM), resulting in a complex interaction of geomechanical effects and multiphase flow in the porous media. Quantification of the state of deformation and stress in the reservoir is therefore essential for the correct prediction of reservoir efficiency and productivity. This paper presents a coupled fluid flow, thermal and geomechanical model employing a program (MATLAB interface code), which was developed to couple conventional reservoir (ECLIPSE) and geomechanical (ABAQUS) simulators for coupled THM processes in multiphase reservoir modeling. In each simulation cycle, time dependent reservoir pressure and temperature fields obtained from three dimensional compositional reservoir models were transferred into finite element reservoir geomechanical models in ABAQUS as multi-phase flow in deforming reservoirs cannot be performed within ABAQUS and new porosity and permeability are obtained using volumetric strains for the next analysis step. Finally, the proposed approach is illustrated on a complex coupled problem related to steam flooding in an oil reservoir. The reservoir coupled study showed that permeability and porosity increase during the injection scenario and increasing rate around injection wells exceed those of other similar comparable cases. Also, during injection, the uplift occurred very fast just above the injection wells resulting in plastic deformation.

• Korean Journal of Materials Research
• /
• v.21 no.4
• /
• pp.236-241
• /
• 2011

Polysilazane and silazane-based precursor films were deposited on stacked TiN/Ti/TEOS/Si-substrate by spin-coating, then annealed at $150{\sim}400^{\circ}C$, integrated further to form the top electrode and pad, and finally characterized. The precursor solutions were composed of 20% perhydro-polysilazane ($SiH_2NH$)n, and 20% hydropolymethyl silazane ($SiHCH_3NH$)n in dibutyl ether. Annealing of the precursor films led to the compositional change of the two chemicals into silicon (di)oxides, which was confirmed by Fourier transform infrared spectroscopy (FTIR) spectra. It is thought that the different results that were obtained originated from the fact that the two precursors, despite having the same synthetic route and annealing conditions, had different chemical properties. Electrical measurement indicated that under 0.6MV/cm, a larger capacitance of $2.776{\times}10^{-11}$ F and a lower leakage current of 0.4 pA were obtained from the polysilazane-based dielectric films, as compared to $9.457{\times}10^{-12}$ F and 2.4 pA from the silazane-based film, thus producing a higher dielectric constant of 5.48 compared to 3.96. FTIR indicated that these superior electrical properties are directly correlated to the amount of Si-O bonds and the improved chemical bonding structures of the spin-on dielectric films, which were derived from a precursor without C. The chemical properties of the precursor films affected both the formation and the electrical properties of the spin-on dielectric film.

• Korean Journal of Materials Research
• /
• v.21 no.1
• /
• pp.21-27
• /
• 2011

A nano-porous structure of tin oxide was prepared using an anodic oxidation process and the sample's electrochemical properties were evaluated for application as an anode in a rechargeable lithium battery. Microscopic images of the as-anodized sample indicated that it has a nano-porous structure with an average pore size of several tens of nanometers and a pore wall size of about 10 nanometers; the structural/compositional analyses proved that it is amorphous stannous oxide (SnO). The powder form of the as-anodized specimen was satisfactorily lithiated and delithiated as the anode in a lithium battery. Furthermore, it showed high initial reversible capacity and superior rate performance when compared to previous fabrication attempts. Its excellent electrode performance is probably due to the effective alleviation of strain arising from a cycling-induced large volume change and the short diffusion length of lithium through the nano-structured sample. To further enhance the rate performance, the attempt was made to create porous tin oxide film on copper substrate by anodizing the electrodeposited tin. Nevertheless, the full anodization of tin film on a copper substrate led to the mechanical disintegration of the anodic tin oxide, due most likely to the vigorous gas evolution and the surface oxidation of copper substrate. The adhesion of anodic tin oxide to the substrate, together with the initial reversibility and cycling stability, needs to be further improved for its application to high-power electrode materials in lithium batteries.