• Transactions on Electrical and Electronic Materials
• /
• v.1 no.4
• /
• pp.20-24
• /
• 2000

This study aimed to develop ITO(Indium Tim Oxide) tin films ablation with a pulsed type KrF excimer laser required for the electrode patterning application in flat panel display into small geometry on a large substrate are. The threshold fluence for ablating ITO on glass substrate is about 0.1 J/㎠. And its value is much smaller than that using 3 .sup rd/ harmonic Nd:YAG laser. Through the optical microscope measurement the surface color of the ablated ITO is changed into dark brown due to increase of surface roughness and transformation of chemical composition by the laser light. The laser-irradiated regions were all found to be electrically isolating from the original surroundings. The XPS analysis showed that the relative surface concentration of Sn and In was essentially unchanged (In:Sn=5:1)after irradiating the KrF excimer laser. Using Al foil made by 2$\^$nd/ harmonic Na:YAG laser, the various ITO patterning is carried out.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.12
• /
• pp.858-862
• /
• 2013

The front electrode should be used to make solar cell panel so as to collect electron. The front electrode is used by paste type, printed on the Si-solar cell wafer and sintered at about $800^{\circ}C$. The paste is composed Ag powder and glass frit which make the ohmic contact between Ag electrode and n-type semiconductor layer. From the previous study, the Ag electrodes which used two commercial glass frit of Bi-system were so different on the interface resistance. The main composition of them was Bi-Zn-B-Si-O and few additives added in one of them. In this study, glass frit was made with the ratio of $Bi_2O_3$ and ZnO on the main composition, and then paste using glass frit was prepared respectively. And, also, the paste using the glass frit added oxide additives were prepared. The change of interface resistance was not large with the ratio of $Bi_2O_3$ and ZnO. In the case of G6 glass frit, 78 wt% $Bi_2O_3$ addition, the interface resistance was $190{\Omega}$ and most low. In the glass frit added oxide, the case of Ca increased over 10 times than it of G6 glass frit on the interface resistance. It was thaught that after sintering, Ca added glass frit was not flowed to the interface between Ag electrode and wafer but was in the Ag electrode.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.161-176
• /
• 2020

This study was to examine the group difference of parental composition (parents, single parent group) in the relationship between parental attitude (supervision, affection, rational explanation) and children's life satisfaction through ego-resilience as a mediating factor. For this, a multi-group analysis was conducted using 310 student data from the 4th panel data of the KCYPS. The results were as follows: First, parents' affectionate parenting attitude on children's life satisfaction was significant in both groups. Second, affectionate and supervisory attitude had effects to improve ego-resilience only in the single-parent group. Third, the affectionate attitude showed a significant positive effect on children's life satisfaction by mediating ego-resilience only in single parent group. This study verified the structural relationship of factors affecting children's life satisfaction and different the pattern of that relationship depending on parental composition. Finally, limitations and implications for future research were presented.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.4
• /
• pp.577-581
• /
• 2007

The effects of intramuscular fat on the sensory characteristics of M. longissimus dorsi in Japanese Black steers were investigated by a trained analytical panel (average 13.4 panelists). Five sets (10 head) of artificial identical twins were divided into 2 groups, high level of intramuscular fat group (HG) which utilized the fattening method of increasing intramuscular fat and low level of intramuscular fat group (LG) which did not use the above method. Regarding M. longissmus dorsi which was produced for use in the sensory evaluation, crude fat contents of HG and LG was 25.8% and 23.2% respectively (p<0.05). Warner-Bratzler shear force, water holding capacity, cooking loss and fatty acid composition of HG and LG were similar between the two groups. M. Longissimus dorsi taken from HG and LG were tested for their sensory characteristics by a trained panel. HG was given higher points for juiciness than LG (p<0.05). There were no significant differences for tenderness and flavor between the two groups. Overall acceptability which synthesized each of the sensory characteristics of HG and LG were 5.04 and 4.69 points respectively (p = 0.05). These results suggested that juiciness increased with the increase of intramuscular fat, and this raised the overall acceptability of M. longissimus dorsi.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.2
• /
• pp.55-69
• /
• 1995

The primary objective of this research was to investigate optimum manufacturing condition of thin composite panels composed of sawdust, polyethylene film and polypropylene net. At the study the experiment was designed to make thin board in which sawdust offers effectiveness as core composing material, polyethylene as adhesive with added urea resin, and polypropylene as stiffness and flexibility in the composition panel. 100 types of thin composite panels were manufactured according to press-lam and mat-forming process of various hot pressing conditions(pressure, temperature and time). They were tested and compared with control boards on bending properties(MOR, MOE, SPL, WML), internal bond strength, thickness swelling, linear expansion and water absorption. At the same time the visual inspections of each types of panels were accomplished. The physical and mechanical properties of composite types passed by visual inspection were analyzed by Tukey's studentized range test. From the statistical analysis, the optimum manufacturing condition of thin composite panels were selected. Compared with two manufacturing processes, mat-forming process performed better than press-lam process in all tested properties. The optimum manufacturing conditions resulted from the experiment and statistical analysis were able to determine as following: the press temperature was shown the most good result at 130$^{\circ}C$ in mat forming process and 140$^{\circ}C$ press lam process, the press time 4 min in both processes, but the press pressure was 25-10kg/$cm^2$ in mat forming and 15k/$cm^2$ press lam process.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.715-726
• /
• 2023

This study suggested that protective panels should be installed as sacrificial members as a safety design method for structures with potential explosions such as hydrogen charging stations to minimize direct damage to the structure and have resilience. To this end, the focus of the experiment is on quantitatively evaluating the impact of the structure when the protection panel is installed closely or spaced apart from the structure in a high-speed collision situation of the projectile. The experimental design used steel plates instead of concrete structural members mainly used in the past for excellent reproducibility, and the impact of structural members was compared and analyzed through deformation differences on the back of the steel plate. In addition, the impact of changes in the physical properties of the elastic body used as a separation material for the protective member and the difference in shock wave transmission time according to the protective member and the elastic body on the structural member was investigated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.2
• /
• pp.77-84
• /
• 2023

As the installation of solar panel accelerates, so does the number of solar panels reaching their end-of-life (EOL). However, the EOL solar panels is becoming a concern, as they contain potentially hazardous materials and are not easily recycled. Coping strategies such as effective collection, disposal, and recycling methods will be important to manage the growing number of EOL solar panels in the coming years.Therefore, many studies have focused on the development of EOL solar panel recycling technology. One recycling technology for EOL solar panels applicable to the construction field is the application of extracted tempered glass from EOL solar panels as construction materials. This study summarized the EOL solar panel disassembly technology and evaluated the mechanical properties of mortar using extracted tempered glass as fine aggregate. The results showed that when tempered glass was used as a fine aggregate in mortar, the compressive strength, flexural strength, and macro pores in the 1-3 ㎛ with 200-300 ㎛ range were affected, regardless of the disassembly technology of EOL solar panels. Especially, we found that the mechanical performance of mortar using chemically treated tempered glass was noticeably decreased due to changes in the chemical composition of the extracted tempered glass resulting from the removal of K₂O and CuO due to chemical reactions. Meanwhile, it was found that when fly ash was used as a binder, the reduction of mechanical performance could be alleviated.

• International Journal of Contents
• /
• v.4 no.3
• /
• pp.1-9
• /
• 2008

The Korean life insurance industry has undergone profound changes, such as the beginning of the variable insurance in July 2001 and the bancassurance enforcement in August 2003. However, little empirical research has analyzed data that includes the bancassurance of life insurance companies operating in Korea. In response to this lack of research, this paper applies DEA (data envelopment analysis) models to measure and decompose their efficiency. We discovered that life insurance companies operating in Korea are a little different in their composition ratio of inputs and outputs, due to the increased variety of distribution channels and new products. We provided efficiency scores, return to scale, and reference frequencies. We also decomposed CCR, BCC, and SBM efficiency into scale efficiency and MIX efficiency. So, we try to investigate whether the sources of inefficiency were caused by the inefficient operation of DMU, disadvantageous conditions, the difference of the composition ratio in inputs and outputs with reference sets, or any combination of the above. Most companies in the sample display had either constant or decreasing returns to scale. The efficiency rankings were less consistent among models and efficient DMUs. In response to this problem, we used the super-efficiency model to rank them and then compared the rankings of the DMUs among the various models. It was also concluded that the availability of panel data, rather than cross-sectional data, would greatly improve the validity of the efficiency estimates.

• Journal of Preventive Medicine and Public Health
• /
• v.44 no.5
• /
• pp.191-200
• /
• 2011

Objectives: The goal of this paper is to examine the social network effects on post-traumatic sdress disorder (PTSD) in female North Korean immigrants who entered South Korea in 2007. Specifically, it attempts to verify if the density and composition of networks make a difference after controlling for the network size. Methods: A multivariate logistic regression is used to probe the effects of social networks using the North Korean Immigrant Panel data set. Because the data set had only completed its initial survey when this paper was written, the analysis was cross-sectional. Results: The size of the support networks was systematically related to PTSD. Female North Korean immigrants with more supporting ties were less likely to develop PTSD, even after controlling for other risk factors (odds-ratio for one more tie was 0.8). However, once we control for the size of the network, neither the density nor the composition of the networks remains statistically significant. Conclusions: The prevalence of the PTSD among female North Korean immigrants is alarmingly high, and regardless of the characteristics of supporting network members, the size of the supporting networks provides substantial protection. This implies that a simple strategy that focuses on increasing the number of supporting ties will be effective among North Korean immigrants who entered South Korea in recent years.

• Asian-Australasian Journal of Animal Sciences
• /
• v.1 no.1
• /
• pp.1-5
• /
• 1988

Ninety feeder steers, predominantly Herefords weighing 280 kg, were assigned at random to each of nine diets: basal (high concentrate); 25 or 50% of untreated rice straw (25- or 50 URS) or ammoniated rice straw (25- or 50 ARS); a 50:50 mixture of URS - alfalfa or ARS - alfalfa replacing a proportion of the basal at 25 and 50%. Animals were slaughtered after 154 or 161 days of feeding. The cattle fed 50% URS had the lowest (P<.05) carcass weight, dressing & external fat thickness, kidney, pelvic and heart fat, rib eye area, marbling score, quality and yield grades, followed by cattle fed 50% ARS, 50% rice straw/alfalfa, and 25% rice straw alone or 25% rice straw/alfalfa mixture. Ammoniation of rice straw improved all measured traits. A 25% substitution of basal diet with untreated or ammoniated rice straw and a 50% substitution with rice straw/alfalfa mixture did not significantly affect carcass traits compared to the basal group. Only 50% ARS and 50% URS cattle showed differences in body composition (P<.05) with lower fat and higher water and protein contents. No significant differences were found in shear value, panel tenderness, connective tissue, juiciness, flavor and overall palatability of meat from steers fed the basal, ARS or URS diets.