• Journal of the Korean Wood Science and Technology
• /
• 제20권2호
• /
• pp.9-22
• /
• 1992

The aim of this research was to investigate physical and mechanical properties of various composition panels, each fabricated with a ratio of fiber to particle of 2 to 10. Type A consisted of fiber-faces and particle-core in layered-mat system. Type B consisted of fiberboard-faces on particleboard-core. Type C consisted of fibers and particles in mixed-mat system. The results obtained from tests of bending strength, internal bond, screw holding strength and stability were as follows: 1. The bending strength and internal bonding of both the Type A panel and the Type B panel were higher than those of the Type C panel and three-layered particle board. 2. The mechanical properties of the Type C panel showed the lowest values of all composition methods. It seems that the different compression ratios of the particle and fiber interrupted the densification of the fibers when hot pressed. 3. The dimensional stability of layered-mat system panels consising of fiber-faces and particle-core was better the than control particleboard. 4. In composition methods of particle and fiber, layered-composition method was more resonable than mixed-composition. The Type B panel had the highest mechanical properties of all the composition types. 5. The Type A panel was considered the ideal composition method because of its resistance to delamination between the particle-layer and the fiber-layer and because of its lower adhesive content and more effective manufa cturing process.

• Computers and Concrete
• /
• 제10권2호
• /
• pp.105-119
• /
• 2012

This paper presents the mix composition and production method that was applied to an extruded Ductile Fiber Reinforced Cement Composite (DFRCC) panel, as well as the flexural performance, represented by deformation hardening behavior with multiple cracking. The effect of fiber distribution characteristics on the flexural behavior of the panel is also addressed. In order to demonstrate the fiber distribution effect, a series of experiments and analyses, including a sectional image analysis and micromechanical analysis, was performed. From the experimental and analysis results, it was found that the flexural behavior of the panel was highly affected by a slight variation in the mix composition. In terms of the average fiber orientation, the fiber distribution was found to be similar to that derived under the assumption of a two-dimensional random distribution, irrespective of the mix composition. In contrast, the probability density function for the fiber orientation was measured to vary depending on the mix composition.

• 콘크리트학회논문집
• /
• 제21권5호
• /
• pp.573-580
• /
• 2009

이 연구는 변형률 경화거동을 나타내기 위한 압출성형된 ECC를 제조하기 위하여 사용되는 조성물의 특성, 제조 방식, 배합 조건, 양생 조건에 관한 검토를 수행하였으며, 섬유의 분포 특성이 압출성형 ECC의 휨거동에 미치는 영향을 파악하고자 하였다. 이를 위하여 이론적/실험적 연구를 수행하여 압출성형 ECC를 생산하기 위한 기본 배합 및 제조 공정을 제시하였으며, 이미지 프로세싱 기법을 이용하여 섬유 분포 특성을 파악하였다. 실험 결과, 최적의 압출성형 ECC 패널의 배합비를 물-매트릭스 비, 시멘트, ECC 파우더, 그리고 규사미분의 비율로 제시하였다. 또한 섬유 분포 특성은 배합에 따라 달라지며 이러한 섬유 분포 특성에 따라 휨거동에 차이가 발생하는 것으로 나타났다. 즉, 섬유 분산성이 좋을수록, 상보에너지($J_b'$)와 최고 가교 응력(${\sigma}_0$)이 클수록 휨 인성이 크게 나타났다. 이는 ECC 배합의 차이가 섬유 분포 특성에 차이를 줄 뿐만 아니라, 마이크로역학 특성에도 변화를 주기 때문이다. 섬유 방향성의 경우, 실험체 별로 크게 차이가 발생하지 않았으나 섬유의 분포가 3차원보다 2차원에 가깝게 배열되는 것으로 나타났다. 그러나 섬유 방향성에 대한 확률 밀도 함수는 2차원으로 가정한 경우와 매우 다른 양상을 보이는 것으로 나타났다. 따라서 원하는 성능(초기균열 강도 및 인성)을 얻기 위해서는 배합과 섬유 분포 특성을 고려하여야 하는 것으로 나타났다.

• 한국정밀공학회지
• /
• 제14권9호
• /
• pp.101-107
• /
• 1997

A sectional analysis of auto-body panel stamping is carried out by using the rigid-plastic FEM based on the membrane theory. The auto-body panel material is assumed to possess normal anisotropy and to obey Hill's new yield criterion and its associated flow rule. A method of contact treatment is proposed in which the skew boundary condition for arbitarily shaped tools is successively used during iteration. Deformation of each section of trunk-lid panel is simulated and composed to get the three-dimensional shape by using CAD technique. It was shown that the composition of the two-dimensional section analysis gives almost the same results as the full three-dimensional analysis.

• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 2017년도 추계학술대회 논문집
• /
• pp.1213-1244
• /
• 2017

This study used a resource-based perspective to analyse the effects of organizational composition on the R&D performance of science and technology government-funded research institutes (GFRIs). We assumed that the composition of each GFRI would eventually be regarded as absorptive capacity and act as a moderating variable between R&D investment and performance. We used a panel generalized least squares (GLS) model with fixed effects to analyse panel data from 115 Korean GFRIs between 2011 and 2015. Our findings show that R&D investment of GFRIs has a direct and positive effect on performance. We also analysed how organizational composition can moderate the effect of R&D investment on performance. The findings provide evidence that organizational composition plays a moderating role between R&D investment and performance. Finally, this study discusses policy implications, its limitations, and also highlights future research directions.

• 한국해양공학회지
• /
• 제15권2호
• /
• pp.66-71
• /
• 2001

A sectional analysis of trunk-lid carried out by using the equilibrium approach based on the force balance together with geometric relations and plasticity theory. In computing a force balance equation, it is required to define a geometric curve approximating the shape of sheet metal at any step of deformation from the interaction between the die and the deformed sheet. The trunk-lid panel material is assumed to possess normal anisotropy and to obey Hill's new yield criterion. Deformation of each section of trunk-lid panel is simulated and composed to get the three-dimensional shape by using CAD technique. It was shown that the three-dimensional shape composition of the two-dimensional analysis.

• 한국군사과학기술학회지
• /
• 제14권1호
• /
• pp.15-21
• /
• 2011

In this paper, the results of experimental analysis for the chemical composition and strengh verification of Bailey Panel Bridge have been presented. Some of main sections of bailey bridge colllected from military engineer troops were prepared for the chemical composition and strengh verification. The composition test and strength verification were conducted by using the optical microscope and Scanning Electron Microscope(SEM), Automatic Control Spark Emission Spectrometer(OBLF), X-ray Fluorescence Spectroscopy(XRF) and Instron measurement. The results showed that currently used sections of bailey bridge passed the strength verification and could be operated in drill of troops and battle fields.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2000년도 추계학술발표강연 및 논문개요집
• /
• pp.136-136
• /
• 2000

• KIEAE Journal
• /
• 제15권1호
• /
• pp.29-43
• /
• 2015

Shared housing for elderly people, where several elderly people live together, gains attention as a means to prevent the lonely death of elderly people and continuously maintain their social relations. The purpose of this study is to compare the characteristics planned through rural and urban areas-residing elderly people's participation in the shared housing spatial composition by area. This study conducted a small scale workshop panel method that targeted small group, but through which extensive information can be acquired, as a qualitative method. This study targeted 16 elderly people aged 65 and over living in rented apartments in rural and urban areas by dividing them two groups by area, namely into four groups. A total of 12 workshop sessions were held with three sessions at a time through a certain time interval. As a result of the study, the elderly people showed positive responses to the shared housing, irrelevant of area. As time went on, the workshop panel method's effect was revealed through consolidated positive attitude and agreement of different opinions. The shared housing for elderly people is valuable as a residential alternative for elderly people, and differentiated supply of the shared housing for elderly people, according to residential area's characteristics, is suggested.

• Journal of the Korean Wood Science and Technology
• /
• 제33권6호통권134호
• /
• pp.46-54
• /
• 2005

목재파티클의 크기(1/32",1/4",1/2")와 재생폴리프로필렌의 혼합비율(10%, 30%, 50%, 70%)을 달리하여 복합패널을 제조하고 물성을 조사하였다. 목재파티클의 혼합비율이 증가함에 따라 밀도가 다소 증가하였으며, 같은 혼합비율에서 목재파티클이 클수록 밀도가 감소하는 경향을 나타냈다. 흡수두께팽창률과 수분흡수율은 재생폴리프로필렌의 혼합비율이 증가할수록 치수안정성이 매우 우수하였다. 휨파괴계수는 재생폴리프로필렌의 혼합비율이 증가할수록 증가한 반면, 휨탄성계수는 감소하는 경향을 나타냈다. SEM 사진 관찰을 통해 재생폴리프로필렌이 용해되어 목재파티클의 조직내에 일부 침투되어 쐐기 형태의 기계적 결합과 목재파티클을 감싸 매트릭스를 형성하여 결합되어 있는 것을 관찰할 수 있었다.