• 한국세라믹학회지
• /
• 제29권9호
• /
• pp.739-749
• /
• 1992

The sols prepared by dialyzing solutions, in which the hydrolyzed precipitates of TEOT or directly Ti(OC3H7)4 were resolved, were the nanoparticulate sol with the average particle size less than 7 nm and the anatase crystal phase. In the pH range of 1.5 to 2.9, the particle size of the nanoparticulate TiO2 sols (0.09 mol/ι) increased gradually upto 15 nm~26nm with the increase of pH in the initial aging state but the sols were transparent all the time, and stable without growin any more after 30 days. When the slipcasted porous alumina tubes were coated by the sol-gel dipping method, the minimum particle size and the aging time for forming the coated gel layer at the given pH were optimized. For obtaining the very thin crack-free and reproducible membrane coating, the use of a nanoparticulate TiO2 sol (0.09 mol/ι) aged for about 30 dyas at pH=2.0 was found to be the best.

• Food Science and Biotechnology
• /
• 제14권6호
• /
• pp.871-874
• /
• 2005

The effect of rice starch at different concentrations (0, 4, 6, and 8%) on dynamic rheological properties of surimi sols was investigated by small-deformation oscillatory measurements at $10^{\circ}C$ and during heating from 10 to $95^{\circ}C$. Dynamic frequency sweeps at $10^{\circ}C$ showed that the magnitudes of storage modulus (G') decreased with increasing starch concentration while those of tan $\delta$ increased. G' values of surimi-rice starch sols during heating decreased with increasing starch concentration, indicating that the pattern of G' changes during heating was influenced by the concentration of the added rice starch. In general, the characteristic G' thermograms of all samples showed a similar sol-gel transition pattern.

• 한국세라믹학회지
• /
• 제28권12호
• /
• pp.1012-1018
• /
• 1991

SiC whisker-reinforced LAS matrix composites were developed by a mixed colloidal processing route. An optimization of processing conditions was made using the zeta potential data of silica, boehmite, and SiC whisker dispersions. Similarly, the SiC whisker-reinforced composites were also fabricated by the conventional sol-gel process using the hydrolysis-condensation reaction of relevant metal alkoxides. The composites fabricated by the mixed colloidal processing route were characterized by a uniform spatial distribution of SiC whisker throughout the matrix. The fracture toughness increased from 1.3 MPa.m1/2 for the LAS specimen to 5.0 Mpa.m1/2 for the hot-pressed composite (95$0^{\circ}C$ and 20 MPa for 20 min) containing 20 wt% SiC whisker. The increase in fracture toughness appears to result mainly from the crack deflection and the crack bridging by whiskers with some additional toughenings from the whisker pullout and the matrix prestressing mechanisms.

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.373-376
• /
• 2012

Thin films of Ag-SiO2-TiO2 composite oxides with SiO2/TiO2 of 20/80 molar compositions were prepared by the sol-gel method, using tetraethylorthosilicate (TEOS) and titanium isopropoxide (TIP) as precursors. Ag-SiO2-TiO2 films coated on commercial glass substrates have successfully been synthesized using sol-gel method. The Ag-SiO2-TiO2 film with 0.5% Ag-added concentration and 20 mol% SiO2-mixture gives optimal results on crystalline structure, optical property, surface area, and photochromic property. Absorption near the wavelength of the incident light decreased gradually. The reversibility of the two-photon writing process in Ag-SiO2-TiO2 film is clearly seen.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.66-67
• /
• 2020

The synthesis of stearic acid composite phase change material (PCM) was investigated and the samples produced were characterized for use in latent heat storage, using a simple chemical sol-gel process. The PCM was encapsulated to tetraethyl orthosilicate by various preparation ratios of stearic acid (5, 10, 15, 20, 30 and 50%). Fourier transformation infrared spectroscope (FT-IR) and X-Ray diffraction (XRD) were performed to determine the chemical structure and crystalloid phase of the microencapsulated PCM. SATEOS1 (5%) shows the best proportion for the PCM. With the presence of stearic acid as core materials and SiO2 as the supporting materials, it does not show any chemical reaction between both of them. SATEOS1 shows promising potential for thermal energy storage as it shows a better encapsulation efficiency and good thermal stability.

• 한국세라믹학회지
• /
• 제29권11호
• /
• pp.905-911
• /
• 1992

Model equations for the gas permeation through a ceramic composite membrane were derived for examining the existence of crack, the reproducibility, and the microstructural properties of composite membranes. From the results of analyzing the nitrogen permeability data through alumina-tube supported TiO2 and SiO2 composite membranes, the extent of cracking, and the formation and structure of membrane top-layers were modelled. It was proved that the crack-free and reproducible composite membranes could be easily prepared only by the pore-filled coating within pores of the support in the sol-gel coating process.

• 분석과학
• /
• 제5권3호
• /
• pp.309-317
• /
• 1992

졸-겔법에 의해 무기-유기 복합체를 합성하였으며, 복합체의 결합특성을 알아보기 위하여 DMTA(Dynamic Mechanical Thermal Analyzer)를 이용하여 유리전이 온돈(Tg)를 측정하였다. HCl 과 물의 양이 증가될수록 Tg는 고운으로 진행됨으로부터 복합화가 더 잘 일어남을 알 수 있었다. 그러나 반응시간에 따른 Tg의 변화는 관찰되지 않았다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.161-164
• /
• 2000

In this paper, a finite element structural analysis for thin-walled open-section composite beams with elastic couplings has been performed. The analysis includes the effects of transverse shear across beam sections, torsion warping and constrained warping. Reissner's semi-complementary energy functional is used to obtain the beam st illness coefficients The bending and torsion related warpings and the shear correct ion factors are obtained as part of the analysis. The resulting theory describes the beam kinematics in terms of the axial, flap and lag bending, flap and lag shear, torsion and torsion-warping deformations. The static response has been validated against finite element predict ions, closed form solutions, and experimental data for rectangular sol id and I-beams with elastic couplings. The free vibration results are also compared with available literature.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 The 4th Korea-Italy Workshop
• /
• pp.37-40
• /
• 2003

Mesoporous zeolite - heteropolyacid-polymer hybrid membrane was prepared by sol-gel processes to make a proton conducting membrane. The crystallinity of mesoporous zeolite in composite membrane was increased with contents of heteropolyacid. Proton conductivity obtained from impedance measurements increases with contents of heteropolyacid, about 10$^{-3}$ S/cm in ca. 1.5 Wt% heteropolyacid.

• Composites Research
• /
• 제36권5호
• /
• pp.289-296
• /
• 2023

본 논문에서는 밀리미터파 대역 전자파 흡수 소재로 알려진 M형 육방정계 페라이트의 하소 온도에 따른 전자기적 특성과 전자파 흡수 특성에 대해 분석하였다. 용융염 기반 Sol-gel법으로 합성된 M형 페라이트는 850℃ 이상의 하소 온도에서 모두 단상의 M형 결정구조를 가지며 하소 온도가 증가함에 따라 합성된 입자의 크기가 증가하였다. 또한 하소 온도가 증가함에 따라 포화자화는 조금씩 증가하는 반면 보자력은 1050℃에서 최대값을 보이며 그 이상의 하소 온도에서 급격히 감소하였다. M형 페라이트가 70 wt% 포함된 TPU 복합재를 제조한 후 강자성 공명이 발생되는 Q(33-50 GHz) 및 V(50-75 GHz) band 대역에서 복소 유전율/ 투자율을 측정한 결과 약 50 GHz 주파수 대역에서 강자성 공명에 의한 강한 자성손실을 확인하였다. 측정된 결과를 바탕으로 M형 페라이트 복합재의 반사손실을 계산한 결과 1250℃의 온도에서 하소된 M형 페라이트 복합재는 약 0.5 mm의 얇은 두께로도 강자성 공명이 일어나는 52 GHz 주파수 대역에서 -20 dB 이상의 우수한 전자파 흡수 성능을 보였다.