• Composites Research
• /
• 제34권6호
• /
• pp.337-344
• /
• 2021

본 연구에서는 복합재료 팬 블레이드 도브테일 요소의 인장하중에 따른 점진적 파손거동을 유한요소 시뮬레이션을 통한 수치적 연구를 수행하고, 인장시험을 통하여 정확도를 검증한다. 도브테일 요소는 터보 팬 엔진의 팬 블레이드를 디스크와 결합시키는 조인트의 하나로, 통상 티타늄 등의 금속 재료로 제작되나 경량화 등의 이유로 복합재료의 적용이 연구되고 있다. 하지만 복합재료를 이용한 팬 블레이드 제조과정에서 드롭오프 플라이(Drop-off ply), 수지 포켓(resin pocket) 등의 제조 결함이 필연적으로 발생한다. 이러한 제조 결함이 복합재료 팬 블레이드 도브테일 요소에 미치는 영향을 확인하기 위해 유한요소모델을 이용한 수치해석을 수행하여 예측 결과와 인장시험 결과를 비교 분석한다. 이때 층간분리(delamination) 거동을 모사 가능한 응집영역 모델을 적용하였다. 결론적으로, 열 잔류응력 및 두께방향 압축하중에 의한 계면 물성 강화 효과를 고려하여 유한요소 해석결과와 시험결과 간의 높은 상사성을 얻을 수 있었다.

• Journal of Platform Technology
• /
• 제10권4호
• /
• pp.3-10
• /
• 2022

본 연구에서는 수소차에 사용되는 수소압력용기 비파괴 안전성 평가 플랫폼 개발을 위해 유한요소해석을 사용하여 안전성 평가 기준 개발에 대한 연구를 수행하였다. Type 4 수소 압력 용기의 안전성을 평가하기 위해 복합 재료의 특성에 따른 매개변수를 바탕으로 재료의 물성을 유한요소 해석을 통해 도출하였다. 이를 통해 수소압력용기에 사용되는 CFRP 복합소재의 기계적 특성을 바탕으로, 내부 결함을 모델링하고 수소압력용기에 대한 평가기준을 사용하여 내부결함에 대한 파손가능성 여부를 도출하는 프로세스를 연구하였다. 결함은 박리, 이물질, 표면 수직균열을 모델링하고 파손 기준에 따른 손상을 분석하여 비파괴검사를 통해 검출된 결함의 안전성 여부를 판단할 수 있는 방법을 연구하였다. 연구 결과 박리 결함은 수소 압력용기의 내부에 근접할수록 파손가능성이 높아졌으며, 수직 균열을 경우 균열의 깊이가 깊어질수록 손상가능성이 높게 나타났다. 또한, 이물질 결함의 경우 압력용기의 외부 방향에 비해 내부 방향에 위치한 경우 손상가능성이 높게 나타났다. 본 연구를 통해 결함의 종류, 형상 및 크기에 따른 수소압력용기의 안전성을 평가할 수 있는 방법을 제시하였으며, 향후 본 연구결과를 바탕으로 수소차량 압력용기의 비파괴시험 안전검사 플랫폼 개발 연구를 수행하고자 한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1229-1232
• /
• 2004

The ratio of optimized concentration on optical characteristics for phase-separated composite organic films (PSCOF) liquid crystal display is 30% of pre-polymer (NOA65) and 70% of ferroelectric liquid crystal (Felix). The layer structure in ferroelectric liquid crystal cell made by 30% NOA65 and 70% Felix materials is tilt-bookshelf layer structure. The angle of tilt-bookshelf structure are 17$^{\circ}$, 12$^{\circ}$ which are almost same of tilt angle of ferroelectric liquid crystal in Sm $C^{\ast}$ phase. We know that this result is from compensating the layer buckling. In this paper, we will discuss the effect of layer structure in PSCOF cell on ratio of concentration between pre-polymer and liquid crystal by x-ray measurements. We believe that technology of PSCOF is a good solution to solve the problems of align-defect and mechanical shock for future TV application and plastic LCD.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.67-70
• /
• 2005

The carbon fiber reinforced/epoxy laminated composites were fabricated with initial fiber failures within the unidirectional fiber pre-pregnated ply. The fiber failures were made intentionally either parallel to and/or perpendicular to the unidirectional fibers within the ply. The pre-made clear-cut cracks were found to be healed partially after laminating process. The laminates were impacted with or without initial fiber failures within the laminates. The force versus deflection curves were compared. The partially healed laminates showed the reduced laminate stiffness as compared to those without any intentional fiber failures. The impact curves were compared with size and the location of the initial failures varied.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.190-194
• /
• 2003

Two different types of nondestructive evaluation (NDE) techniques were employed to investigate the tensile behavior of ceramic matrix composites (CMCs). Two NDE methods, ultrasonic testing (UT) and infrared (IR) thermography, were used to assess defects and/or damage evolution before and during mechanical testing. Prior to tensile testing, a UTC-scan and a xenon flash method were performed to obtain initial defect information in light of UT C-scans and thermal diffusivity maps, respectively. An IR camera was used for in-situ monitoring of progressive damages. The IR camera measured temperature changes during tensile testing. This paper has presented the feasibility of using NDE techniques to interpret structural performance of CMCs.

• KSBB Journal
• /
• 제23권1호
• /
• pp.8-17
• /
• 2008

There are many different approaches to healing of acute and chronic ulcer and large skin defect, such as burn. Currently available wound covers fall into two categories. Permanent covering, such as autografts, and temporary ones, such as allograft including de-epidermized cadaver skin, bioartificial skin, xenografts, and synthetic dressings. Autologous skin grafting in the form of split- or full-thickness skin is still the good standard. Following on from developments in the 1980s involving the use of cultured keratinocyte grafts in wound healing, the last decade has been great progress in the fabrication of composite bioartificial skin grafts. However, two bottleneck on producing cultured bioartificial skin, whether of the simple epithelial cell sheet type, or the more complex composite type, continue to be the generation of sufficient keratinocytes cheaply and quickly and develop biocompatible dermal scaffolds. This article covers the development, clinical application, and current research directions associated with bioartificial skin.

• 한국분말재료학회지
• /
• 제14권6호
• /
• pp.399-404
• /
• 2007

The Cu-based bulk metallic glass (BMG) composite was fabricated by spark plasma sintering (SPS) using of gas-atomized metallic glass powders and ductile brass powders. No defect such as pores and cavities was observed at the interface between the brass powder and the metallic glass matrix, suggesting that the SPS process caused a severe viscous flow of the metallic glass and brass phases in the supercooled liquid region, resulting in a full densification. The BMG composites shows some macroscopic plasticity after yielding, although the levels of strength decreased.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제16권2호
• /
• pp.130-136
• /
• 1994

Toothash and plaster of Paris (Calcium sulfate) have been studied for bone substitute through experimental studies and clinical studies. Toothash is like resorbable hydroxyapatite. Plaster of Paris is resorbable and biocompatible. The toothash combined with plaster of Paris has the advantages of individual characteristics. The authors used this composite material in the jaw defect filling. In operation, we could manage this implant material easily and remove the dead space. During the followup period, this composite material was resorbed gradually and substituted as new-forming bone from the surrounding tissue. Complications were minor and treated completely without problems.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.138-139
• /
• 2021

The MiDF Cement Composite is a high-performance construction material with low defects that dehydrates surplus water through pressurization and minimizes air gap between particles. In other words, the performance expression of the MiDF cement complex is affected by pressurized conditions. Thus, this study analyzed the physical characteristics of MiDF cement complex according to the power and pressure of the ga-power and the time of application and intends to use it as a basic data for optimal mixing.

• Archives of Plastic Surgery
• /
• 제46권6호
• /
• pp.580-588
• /
• 2019

Background There are various reconstructive options for nail bed defects. However, it is challenging not to leave a deformity. In this study, we investigated differences in outcomes depending on the reconstruction method, attempted to determine which method was better, and analyzed other factors that may affect outcomes. Methods The long-term outcomes of nail bed reconstruction were reviewed retrospectively. We performed three types of reconstruction depending on the defect type: composite grafts of severed segments, nail bed grafts from the big toe, and two-stage surgery (flap coverage first, followed by a nail bed graft). Subsequent nail growth was evaluated during follow-up, and each outcome was graded based on Zook's criteria. The reconstruction methods were statistically analyzed. Other factors that could contribute to the outcomes, including age, the timing of surgery, germinal matrix involvement, defect size, and the presence of bone injuries, were also compared. Results Twenty-one patients (22 digits) who underwent nail bed reconstruction were evaluated. The type of reconstruction method did not show a significant relationship with the outcomes. However, patients who sustained injuries in the germinal matrix and patients with a defect larger than half the size of the nail bed had significantly worse outcomes than the comparison groups. Conclusions The results suggest that no operative method was superior to another in terms of the outcomes of nail bed reconstruction. Nevertheless, involvement of the germinal matrix and defect size affected the outcomes.