• 대한기계학회논문집
• /
• 제18권4호
• /
• pp.1057-1063
• /
• 1994

An instantaneous frequency analysis is a technique to examine a signature for the rotating machinery if the signal has several transitions within a cycle. This paper discusses the conditions of existing negative frequency components in the instantaneous frequency. By using a signal consisted of two frequency components, the instantaneous frequency analysis is conducted while the amplitude ratio between two frequency components has been changed. The analysis shows that, depending on the amplitude ratio, the instantaneous frequencies have averaged, zero-valued, or negative components. It turns out that the negative-valued instantaneous frequencies, which have been regarded as the noise effect, are the consequence of the calculation process for the multisignal components. The criteria of existing the negative values in instantaneous frequencies is given in terms of the relative amplitude ratio and the frequency difference. Especially when the amplitude ratio approaches to 1, the instantaneous frequency fluctuates ${\pm}\infty$ in theory, which implies that instantaneous frequency has unstable region around the amplitude ratio, 1.Also, as the frequency difference between major signal components is increased, the region of existing negative instantaneous becomes broader. In an instantaneous frequency analysis, therefore, a narrow band analysis is suggested, with extreme care if the amplitude ratio approaches to 1. In this paper, a vibration signal monitored from a rotating machinery is also examined as an application example in order to show the existence of negative instantaneous frequencies components.

• 대한한의학회지
• /
• 제32권4호
• /
• pp.139-148
• /
• 2011

Objective: The purpose of this study was to investigate the effect of food intake on the Fourier components of radial pulse wave. Methods: Thirty-one healthy male subjects participated in this study. Radial pulse was measured using 3 dimensional pulse imaging system (DMP-3000) before, right after, 40 minutes after, 80 minutes after and 120 minutes after food intake. Fourier transform was performed and the frequency and amplitude of Fourier components were analyzed. Results: 1. The frequency and the amplitude of Fourier components of radial pulse wave increased significantly after food intake. 2. The frequency of Fourier components increased right after food intake and then gradually decreased as time passed, however the amplitude of Fourier components increased and maintained certain levels and patterns throughout the experimental period of 120 minutes. 3. The change ratios of the frequency and the amplitude of Fourier components after food intake varied with the pulse measuring locations. Conclusions: Food intake exerts an influence on radial pulse wave, resulting in increase of frequency and amplitude of Fourier components. The change ratios of the frequency and the amplitude of Fourier components after food intake varied with the pulse measuring locations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권9호
• /
• pp.2312-2325
• /
• 2013

In this paper, we propose a preprocessing method that it is to correct the distortion of text area in Korean signboard images as a preprocessing step to improve character recognition. Distorted perspective in recognizing of Korean signboard text may cause of the low recognition rate. The proposed method consists of four main steps and eight sub-steps: main step consists of potential vertical components detection, vertical components detection, text-boundary estimation and distortion correction. First, potential vertical line components detection consists of four steps, including edge detection for each connected component, pixel distance normalization in the edge, dominant-point detection in the edge and removal of horizontal components. Second, vertical line components detection is composed of removal of diagonal components and extraction of vertical line components. Third, the outline estimation step is composed of the left and right boundary line detection. Finally, distortion of the text image is corrected by bilinear transformation based on the estimated outline. We compared the changes in recognition rates of OCR before and after applying the proposed algorithm. The recognition rate of the distortion corrected signboard images is 29.63% and 21.9% higher at the character and the text unit than those of the original images.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권7호
• /
• pp.327-334
• /
• 2003

We have investigated the quench behavior of the series connection of resistive type superconducting fault current limiter (SFCL) components based on YBCO films. Equal shunt resistors $R_s$ across individual SFCL components successfully produced simultaneous Quenches for 5 components in series, resulting in equal application of voltage to all components. If the two components having the highest and the lowest critical currents ($I_c$) quench safely, others quench altogether The highest shunt resistance is to guarantee the safe quenches of all components, leading to the equal voltage applications within the first half cycle after a fault in the short circuit test. The highest $R_s$ was found to be 28 ［$\Omega$］ for the components in the given quench environment. Considering the safe quenches and protection coordination, the optimal $R_s$ was suggested to be approximately a half of the highest $R_s$,, allowing wide selection of $R_s$ and $I_c$'s. This design provides a practical wav of connecting small SFCL components in series for high voltage application.

• 한국연초학회지
• /
• 제24권2호
• /
• pp.113-120
• /
• 2002

This study was conducted to determine the smoke component changes by adding oriental, reconstituted, and expanded tobacco leaves. 7 different cigarette brands which were mixed with flue-cured, burley, oriental, reconstituted and expanded tobacco leaves were used for this study. 64 kinds of smoke components which were 6 of general components, 34 of semi-volatile and volatile components, 9 of acid components, and 15 of phenolic components were analyzed. All smoke components of mainstream smoke were changed by the different branding. As Tar, nicotine, ammonia, pH, all of acid compounds(except lacatic and glycolic acid) were decreased; HCN, levoglucosame, 4-vinyl phenol, 4-vinyl catechol, quinic acid-r-lactone, acetaldehyde, 2,3-butadiene, stylene were increased by adding oriental tobacco leaves. When the reconstituted tobaccos were added to 20%, the concentration of nicotine, all of acid compounds(except lactic. glycolic, palmitic acid) and all of phenol compounds were reduced; the concentration of ammonia, HNC, CO, aeconitrile, benzene, 2-butanone, moth-acrolene, butyronitrile, stylene, o-xylene were increased. As decreasing ammonia, pH, nicotine, all of acid compounds, all of phenol compounds, Isoprene, acetonitrile, 2-methyl-2-butene, 1,3-pentadiene, 2-nlethyl furane, ethylene cyclopentanone, ethyl bezene; increasing CO concentration were followed by adding expanded tobacco leaves.

• Applied Biological Chemistry
• /
• 제35권5호
• /
• pp.346-350
• /
• 1992

한국 재래식 간장의 많은 휘발성 향기성분 중에서 특징적인 향기성분을 규명하고자 하였다. 연속 수증기 증류 추출장치로 휘발성 향기성분을 추출하고 재래식 간장향을 나타내는 중성획분을 분획하여 농축하였다. 이를 GC-관능검사에 의해 각 peak성분의 방향성을 조사하고, 이 각 peak성분을 fraction collector APP-5가 부착된 preparative GC로 분획포집한 후, 이를 GC/MS로 분석 동정하였다. 그 결과 GC-관능검사에서 불쾌취를 나타내는 향기성분으로는 3-methyl-1-butanol을, 간장향을 나타내는 향기성분으로는 dimethyl trisulfide, benzeneacetaldehyde, benzeneethanol을 각각 동정하였다.

• 한국지진공학회논문집
• /
• 제27권1호
• /
• pp.1-12
• /
• 2023

Structures of high-rise buildings are less prone to earthquake damage. This is because the response acceleration of high-rise buildings appears to be small by generally occurring short-period ground motions. However, due to the increased construction volume of high-rise buildings and concerns about large earthquakes, long-period ground motions have begun to be recognized as a risk factor for high-rise buildings. Ground motion observed on each floor of the building is affected by the eigenmode of the building because the ground motion input to the building is amplified in the frequency range corresponding to the building's natural frequency. In addition, long-period components of ground motion are more easily transmitted to the floor or attached components of the building than short-period components. As such, high-rise buildings and non-structural components pose concerns about long-period ground motion. However, the criteria (ASCE 7-22) underestimate the acceleration response of buildings and non-structural components caused by long-period ground motion. Therefore, the characteristics of buildings' acceleration response amplification ratio and non-structural components were reviewed in this study through shake table tests considering long-period ground motions.

• 한국지형학회지
• /
• 제26권2호
• /
• pp.15-27
• /
• 2019

This study tries to reveal transport mechanism and origin of components from fluvial terrace deposits in Danyang and Geum River basins, through grain size partitioning using the Weibull function. Grain size parameters suggest that the samples analyzed in this study can be grouped into the coarse, fine and medium samples. The coarse samples are partitioned into three or four components. More than 65% of the coarse samples consist of components by suspension and saltation by fluvial process, while components by attachment to coarse grains or aggregates and/or by individual grains deposited under non-flow condition are also found in the coarse samples. The fine samples consist of four components and components found in loess deposits in Korea occupy >70%, suggestive of the same transport mechanisms (westerlies and winter monsoon) and common source areas with loess deposits in Korea. However, components by aeolian process from local sources as well as by fluvial process are also found in the fine samples. The medium samples are partitioned into components with similar sizes to the coarse and fine samples, respectively.

• 한국멀티미디어학회논문지
• /
• 제14권2호
• /
• pp.318-328
• /
• 2011

본 논문은 한옥 설계 지원 시스템을 개발함에 있어서 부재의 수를 획기적으로 줄이면서 한옥을 설계할 수 있는 효과적인 부재 표현방식을 제안하고자 한다. 한옥은 규모, 지붕의 모양, 공포의 유무 등에 따라 다양하게 분류할 수 있으며 결구방식 및 연결부재에 따라 부재의 수가 매우 다양하다. 이러한 다양한 부재를 모두 설계하게 되면 설계 시에 부재의 사용과 취급이 어려워진다. 이러한 문제를 해결하기 위해서 전남 표준한옥올 중심으로 한옥의 목구조 방식을 체계적으로 분석하고 특성이 비슷한 부재들을 모아서 하나의 템플릿으로 설계하여 다양한 형태의 유사부재들을 속성 값에 따라 자유롭게 생성할 수 있도록 객체지향 방식의 표현기법을 사용한다. 제안된 방식은 객체지향 방식의 부재를 표현함에 있어서 연결 부재간의 상관관계를 부재와 부재간의 관련 파라미터들 사이의 결합규칙을 적용함으로써 설계의 오류를 최소화 하도록 지원할 수 있다.

• 한국환경복원기술학회지
• /
• 제9권4호
• /
• pp.52-59
• /
• 2006

This study was conducted to find end-members and tracers which are effective to be applied in the End Member Mixing Analysis (EMMA) model for runoff separation at the Gwangneung coniferous forest catchment (13.6ha), Gyeonggido, Korea. We monitored three successive rainfall events during two weeks from June 26, 2005 to July 10, 2005, and analysed chemical properties of rainfall, throughfall, stemflow, groundwater and soil water considered as main components of storm runoff. The followings are the results of analyses of each component and tracer. Groundwater, soil water and rainfall (or throughfall) were dominant runoff components. Rainfall and groundwater were selected as main components for the two components-one tracer mixing model, and groundwater, soilwater and throughfall were selected as main components for the three components-two tracers mixing model. Tracers were selected from anion ($Cl^-$ and ${SO_4}^{2-}$), cation ($Na^+$, $K^+$, $Mg^{2+}$, and $Ca^{2+}$) and Acid Neutralizing Capacity (ANC) in event 1, 2, and 3. $Na^+$, $Ca^{2+}$ and ANC were selected in the two components-one tracer mixing model and ${SO_4}^{2-}-K^+$, ${SO_4}^{2-}-Na^+$, ${SO_4}^{2-}-Ca^{2+}$, ${SO_4}^{2-}$-ANC, and $Ca^{2+}$-ANC were selected in the three components-two tracers mixing model. Selected main runoff components and tracers can provide basic information to determine the contribution rate of each runoff component and identify the runoff process in a forest watershed.