• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.239-245
• /
• 2020

Recently, BIM (Building Information Modeling) are widely being utilized in Construction industry. However, most structures that have been constructed in the past do not have BIM. For structures without BIM, the use of SfM (Structure from Motion) techniques in the 2D image obtained from the camera allows the generation of 3D model point cloud data and BIM to be established. However, since these generated point cloud data do not contain semantic information, it is necessary to manually classify what elements of the structure. Therefore, in this study, deep learning was applied to automate the process of classifying structural components. In the establishment of deep learning network, Inception-ResNet-v2 of CNN (Convolutional Neural Network) structure was used, and the components of bridge structure were learned through transfer learning. As a result of classifying components using the data collected to verify the developed system, the components of the bridge were classified with an accuracy of 96.13 %.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.569-576
• /
• 2003

Although the Free Trade Zone(FTZ) are actually competing with various strategies, the definition and structural understanding of activation strategies are not known very much Therefore this study has launched from this fact, and has the objective of obtaining the structural model for activation strategies in Gunsan FTZ, and understanding the components of activation in these region The process began by abstracting the components that composed the success factors in FTZ through recent research, and grouping it by the most core components. Also, by using the FSM(Fuzzy Structural Modeling) method to understand the structure of the grouped components, and the structural model for activation of FTZ was able to obtain as the result. When analyzing the obtained structural model, expansion of tax reduction, flexibility of law systems and good business environment came out to be the most important component groups, and especially flexibility of law systems and good business environment were the most effective component that effected all the other components overall.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.5
• /
• pp.355-361
• /
• 2000

A recycling reactor system operated under sequential anoxic and oxic conditions for the treatment of swine wastewater has been developed, in which piggery slurry is fermentatively and aerobically treated and then part of the effluent is recycled to the pigsty. This system significantly removes offensive smells (at both the pigsty and the treatment plant), BOD and others, and may be cost effective for small-scale farms. The most dominant heterotrophic were, in order, Alcaligenes faecalis, Brevundimonas diminuta and Streptococcus sp., while lactic acid bacteria were dominantly observed in the anoxic tank. We propose a novel monitoring system for a recycling piggery slurry treatment system through the use of neural networks. In this study, we tried to model the treatment process for each tank in the system (influent, fermentation, aeration, first sedimentation and fourth sedimentation tanks) based upon the population densities of the heterotrophic and lactic acid bacteria. Principal component analysis(PCA) was first applied to identify a relationship between input and output. The input would be microbial densities and the treatment parameters, such as population densities of heterotrophic and lactic acid bacteria, suspended solids(SS), COD, NH$_4$(sup)+-N, ortho-phosphorus (o-P), and total-phosphorus (T-P). then multi-layer neural networks were employed to model the treatment process for each tank. PCA filtration of the input data as microbial densities was found to facilitate the modeling procedure for the system monitoring even with a relatively lower number of imput. Neural network independently trained for each treatment tank and their subsequent combined data analysis allowed a successful prediction of the treatment system for at least two days.

• Ocean and Polar Research
• /
• v.38 no.1
• /
• pp.1-19
• /
• 2016

Recently, there has been a growing interest in physical-biological ocean-modeling systems by communities in the fields of science and business. In this paper, we present preliminary results from a coupled physical-biological model for the Northwestern Pacific marginal seas. The ocean circulation component is an implementation of the Regional Ocean Modeling System (ROMS), and the lower trophic level ecosystem component is a Nutrient-Phytoplankton-Zooplankton-Detritus (NPZD) model. The ROMS-NPZD coupled system, with a 25 km resolution, is forced by climatological atmospheric data and predicts the physical variables and concentrations of nitrate, phytoplankton, zooplankton, and detritus. Model results are compared with remote-sensed sea surface temperature and chlorophyll, and with climatological sea surface salinity and nitrate. Our model adequately reproduces the observed spatial distribution and seasonal variability of nitrate and chlorophyll concentrations as well as physical variables, showing a high correlation in the East Sea (ES) and Kuroshio/Oyashio Extension (KOE) region but relatively low correlation in the Yellow Sea (YS) and East China Sea (ECS). Although some deficiencies were found in the biological components, such as the over/underestimation of the intensity of phytoplankton blooms in the ES and KOE/the YS and ECS, our system demonstrates the capability of the model to capture and record dominant seasonal variability in physical-biological processes and this holds out the promise of coming to a better understanding of such processes and making better predictions .

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.1113-1116
• /
• 2005

Using COMSAT which provides multi-beam switching function, the optimal transmission channel environment which provides the high data rate communication are proposed in this paper. Also the link budget for communication transponder of COMSAT is designed. Based on the channel modeling for group delay, non-linear and gain flatness characteristics, the system performances which provide various data rate services were analyzed in Ka-band satellite channel. As the transmission data rate is increased, the degradation due to these channel characteristics is severely increased. The linear component of group delay and the AM-AM component of non-linear characteristics severely affect the system performance. To efficiently provide the various service via the same transmission system it is necessary to equalize the primary impairment factors. The optimum operating points of HDR satellite transmission system are implemented and operated by considering the analyzed results on channel characteristics.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.1
• /
• pp.35-42
• /
• 2016

Modern aircraft is facing the increase of power demands and thermal challenges. In accordance with the application of more electric technology and advanced mission requirement, aircraft system requires increase of power generation and it cause increase of internal heat generation. Simultaneously, restrictions have significantly been imposed to the thermal management system. Modern aircraft must maintain low radar observability and infra-red signature. In addition, new composite aircraft skins have reduced the amount of heat that can be rejected to the environment. The combination of these characteristics has increased the challenges faced by thermal management. In order to mitigate the thermal challenges, the concept of system level thermal management should be applied and new modeling and simulation tools need to be developed. To develop and utilize system level thermal management technology, three key points are considered. Firstly, the performance changes of subsystems and components must be assessed at an integrated thermal system. It is because that each subsystem and component interacts with other subsystems or components and it can directly effects on overall system performance. Secondly, system level thermal management requirements and solutions must be evaluated early in conceptual design process as vehicle and propulsion system configuration decisions are being made. Finally, new component level thermal management technologies must focus on reducing heat generation and increasing the availability of heat sinks.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.3
• /
• pp.101-106
• /
• 2004

Recently, a network defense simulator becomes essential in studying cyber incidents because the cyber terror become more and more interesting. The network defense simulator is a tool to estimate damages and an effectiveness of a defense mechanism by modeling network intrusions and defense mechanisms. Using this tool, users can find efficient ways of preventing a cyber terror and recovering from the damage. Previous simulators start the simulation after entire scenario has made and been loaded to simulation engine. However, in this way it can't model human judgement and behavior, and it can't simulate the real cyber terror very well. In this paper, we have added a dynamic simulation component to our previous network security simulator. This component improved accurate modeling of network intrusions and defense behaviors. We have also proposed new modified architecture of the simulation system. Finally we have verified correct simulation results from stammer worn simulation.

• Journal of KIBIM
• /
• v.12 no.4
• /
• pp.19-31
• /
• 2022

With the development of 3D-based CAD (Computer Aided Design), attempts at freeform building design have expanded to small and medium-sized buildings in Korea. However, a standardized system for continuous utilization of shape data and BIM conversion process implemented with 3D-based NURBS is still immature. Without accurate review and management throughout the Freeform building project, interference between members occurs and the cost of the project increases. This is very detrimental to the project. To solve this problem, we proposed a continuous utilization process of 3D shape information based on BIM parameters. Our process includes algorithms such as Auto Split, Panel Optimization, Excel extraction based on shape information, BIM modeling through Adaptive Component, and BIM model utilization method using ID Code. The optimal cutting reference point was calculated and the optimal material specification was derived using the Panel Optimization algorithm. With the Adaptive Component design methodology, a BIM model conforming to the standard cross-section details and specifications was uniformly established. The automatic BIM conversion algorithm of shape data through Excel extraction created a BIM model without omission of data based on the optimized panel cutting reference point and cutting line. Finally, we analyzed how to use the BIM model built for automatic conversion. As a result of the analysis, in addition to the BIM utilization plan in the general construction stage such as visualization, interference review, quantity calculation, and construction simulation, an individual management plan for the unit panel was derived through ID data input. This study suggested an improvement process by linking the existing research on atypical panel optimization and the study of parameter-based BIM information management method. And it showed that it can solve the problems of existing Freeform building project.

• Journal of The Korean Association of Information Education
• /
• v.21 no.1
• /
• pp.67-76
• /
• 2017

Recently, the Ministry of Education is pursuing various educational reforms for the cultivation of creative talent in preparation for the fourth industrial revolution. In this study, we developed STEAM program using the info-graphic and 3D modeling. As a result of applying the developed STEAM program to 2 classes of 6 grade in ${\circ}{\circ}$ elementary school in Seoul, it showed that creative problem solving ability of all students participating in the program has improved. Particularly, Motivational component has shown the greatest improvement among the creative problem solving ability elements. Through the results of this study, it is expected that various STEAM programs using the infographic and 3D modeling will be developed and applied in the field of elementary school for the cultivation of creative talent with creative thinking ability in preparation for future society.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.2
• /
• pp.18-25
• /
• 2008

The traditional a roaches to software development, such as XP, UP, CBD and other CASE tools, are useful for constructing various software components. However, they are not designed to face the challenges of open environments that focus on service. The Service-Oriented Architecture(SOA) is a component architecture that interconnects an application's different functional units, called services. SOA provides a good way to integrate the business process through well-defined interfaces and contracts between business services. In this paper, we propose a method of business process modeling based on SOA with a P2P approach. Also, A P2P business process modeling system is presented. This, results in admitting the reality of enterprise that changes on the basis of services, and suggests more efficient and visual direction for the process integration between enterprises.