• Smart Structures and Systems
• /
• v.23 no.3
• /
• pp.307-318
• /
• 2019

The frequently excessive vibrations presented in civil structures during seismic events or service conditions may result in users' discomfort, or worst, in structures failure, producing economic and even human casualties. This work contributes in proposing the synthesis of a nonlinear optimal control strategy for semiactive structural control, with the main characteristic that the synthesis considers both the structure model and the semiactive actuator nonlinear dynamics, which produces a nonlinear system that requires a nonlinear controller design. The aim is to reduce the unwanted vibrations in the response of civil structures, by means of intelligent fluid semiactive actuator such as the Magnetorheological Damper (MRD), which is a device with a low level of power consumption. The civil structures for which the proposed control methodology can be applied are those admitting a state-dependent coefficient factorized representation model, such as buildings, bridges, among others. A scaled model of a three storey building is analyzed as a case study, whose dynamical response involves displacement, velocity and acceleration of each one of the storeys, subjected to the North-South component of the September 19th., 2017, Puebla-Morelos (7.1M), Mexico earthquake. The investigation rests on comparing the structural response over time for two different conditions: with no control device installed and with one MRD installed between the first floor and the ground, where a nonlinear optimal signal for the MRD input voltage is determined. Simulation results are presented to show the effectiveness of the proposed controller for reducing the building's dynamical response.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.219-220
• /
• 2016

A power management system (PMS) has been an important part in a ship integrated control system. To evaluate a PMS for a liquefied natural gas carrier (LNGC), this research proposes a real-time hardware-in-the-loop simulation (HILS), which is composed of major component models such as turbine generator, diesel generator, governor, circuit breaker, and 3-phase loads on MATLAB/Simulink. In addition, FPGA based control console and main switchboard (MSBD) are constructed in order to develop an efficient control and a similar real environment in an LNGC PMS. A comparative study on the performance evaluation of PMS functions is conducted using two test cases for sharing electric power to consumers in an LNGC. The result shows that the proposed system has a high verification capability for the operating function and failure insertion evaluation as a PMS simulator.

• Computers and Concrete
• /
• v.24 no.3
• /
• pp.207-222
• /
• 2019

This paper has presented an effective and accurate meso-scale finite element model for simulating the fracture process of concrete under compression-shear loading. In the proposed model, concrete is parted into four important phases: aggregates, cement matrix, interfacial transition zone (ITZ), and the initial defects. Aggregate particles were modelled as randomly distributed polygons with a varying size according to the sieve curve developed by Fuller and Thompson. With regard to initial defects, only voids are considered. Cohesive elements with zero thickness are inserted into the initial mesh of cement matrix and along the interface between aggregate and cement matrix to simulate the cracking process of concrete. The constitutive model provided by ABAQUS is modified based on Wang's experiment and used to describe the failure behaviour of cohesive elements. User defined programs for aggregate delivery, cohesive element insertion and modified facture constitutive model are developed based on Python language, and embedded into the commercial FEM package ABAQUS. The effectiveness and accuracy of the proposed model are firstly identified by comparing the numerical results with the experimental ones, and then it is used to investigate the effect of meso-structure on the macro behavior of concrete. The shear strength of concrete under different pressures is also involved in this study, which could provide a reference for the macroscopic simulation of concrete component under shear force.

• Earthquakes and Structures
• /
• v.17 no.2
• /
• pp.163-173
• /
• 2019

For Special Concentrically Braced Frame (SCBF), it is common that the damage concentrates at a certain story instead of spreading over all stories. Once the damage occurs, the soft-story mechanism is likely to take place and possibly to result in the failure of the whole system with more damage accumulation. In this study, we use a strongback column which is an additional structural component extending along the height of the building, to redistribute the excessive deformation of SCBF and activate more structural members to dissipate energy and thus avoid damage concentration and improve the seismic performance of SCBF. We tested one-third-scaled, three-story, double-story X SCBF specimens with static cyclic loading procedure. Three specimens, namely S73, S42 and S0, which represent different combinations of stiffness and strength factors ${\alpha}$ and ${\beta}$ for the strongback columns, were designed based on results of numerical simulations. Specimens S73 and S42 were the specimens with the strongback columns, and S0 is the specimen without the strongback column. Test results show that the deformation distribution of Specimen S73 is more uniform and more brace members in three stories perform nonlinearly. Comparing Drift Concentration Factor (DCF), we can observe 29% and 11% improvement in Specimen S73 and S42, respectively. This improvement increases the nonlinear demand of the third-story braces and reduces that of the first-story braces where the demand used to be excessive, and, therefore, postpones the rupture of the first-story braces and enhances the ductility and energy dissipation capacity of the whole SCBF system.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.657-665
• /
• 2021

Nondestructive evaluation methods play an important role in ensuring component integrity and safety in many industries. Operator fatigue can play a critical role in the reliability of such methods. This is important for inspecting high value assets or assets with a high consequence of failure, such as aerospace and nuclear components. Recent advances in convolution neural networks can support and automate these inspection efforts. This paper proposes using residual neural networks (ResNets) for real-time detection of corrosion, including iron oxide discoloration, pitting and stress corrosion cracking, in dry storage stainless steel canisters housing used nuclear fuel. The proposed approach crops nuclear canister images into smaller tiles, trains a ResNet on these tiles, and classifies images as corroded or intact using the per-image count of tiles predicted as corroded by the ResNet. The results demonstrate that such a deep learning approach allows to detect the locus of corrosion via smaller tiles, and at the same time to infer with high accuracy whether an image comes from a corroded canister. Thereby, the proposed approach holds promise to automate and speed up nuclear fuel canister inspections, to minimize inspection costs, and to partially replace human-conducted onsite inspections, thus reducing radiation doses to personnel.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.2
• /
• pp.51-56
• /
• 2021

The brachial systolic blood pressure and pulse pressure are the predictors of cardiovascular disease in individuals over 50 years of age. As the stiffness increases, the reflex amplitude and pressure in the late systole increase, resulting in an increase in left ventricular load and myocardial oxygen demand. Therefore, it is necessary to study how stiffness affects blood pressure. In this study, the blood pressure pulse waves were measured before and after taking the drug, and the blood pressure pulse wave was measured before and after myocardial heart transplantation in patients with heart failure. The correlation between R, L, and C components of the Windkessel model was estimated by increasing blood pressure. As a result of modeling the parameters of the Windkessel model using the curve fitting method, the increase in blood pressure and decrease in systolic rise time were due to the increase in the L component in the RLC Windkessel model. Among the various mechanical characteristics of blood vessels, the most important parameter affecting high BP waveform is the inertance.

• International Journal of Advanced Culture Technology
• /
• v.11 no.3
• /
• pp.277-296
• /
• 2023

The South Korean ethnic diaspora US lobby shows efficacy as an interest group in generating influence in American foreign and domestic public policy making. The persuasive portrayal of South Korea as a critical Cold War US ally reinforced US amenability to pro-South Korea lobbying. Also, the South Korean US diaspora is a comparatively recent immigrant group, thus its lingering resistance to assimilation facilitates its political mobilization to lobby the US government. One source of this influence includes the foundational legacy of proselytizing Western and particularly American religious social movement representatives in Korean religiosity and society. US protestant Christianity acquired a strong public association with emerging Korean nationalism in response to Japanese imperialism and occupation. Hostility towards Japanese colonialism followed by the threat from Soviet-sponsored, North Korean Communism meant Christianity did not readily become a cultural symbol of excessive external, US interference in South Korean society by South Korean public opinion. The post-Cold War shift in US foreign policy towards targeting so-called rogue state vestiges of the Cold War including North Korea enhanced further South Korea's influence in Washington. Due to essential differences in the perceived historical role of American influence, extrapolation of the South Korean development model is problematic. US hegemony in South Korea indicates that perceived alliance with national self-determination constitutes the core of soft power appeal. Civilizational appeal per se in the form of religious beliefs are not critically significant in promoting American polity influence in target polities in South Korea or, comparatively, in the Middle East. The United States is a perceived opponent of pan-Arab nationalism which has trended towards populist Islamic religious symbolism with the failure of secular nationalism. The pronounced component of evangelical Christianity in American core community nationalism which the Trump campaign exploited is a reflection of this orientation in the US.

• Structural Engineering and Mechanics
• /
• v.86 no.6
• /
• pp.715-730
• /
• 2023

Broad studies have addressed the issue of structural element damage identification, however, rubber bearing, as a key component of load transmission between the superstructure and substructure, is essential to the operational safety of a bridge, which should be paid more attention to its health condition. However, regarding the limitations of the traditional bearing damage detection methods as well as few studies have been conducted on this topic, in this paper, inspired by the model updating-based structural damage identification, a two-stage bearing damage identification method has been proposed. In the first stage, we deduce a novel bearing damage localization indicator, called element relative MSE, to accurately determine the bearing damage location. In the second one, the prior knowledge of bearing damage localization is combined with sailfish optimization (SFO) to perform the bearing damage estimation. In order to validate the feasibility, a numerical example of a 5-span continuous beam is introduced, also the noise robustness has been investigated. Meanwhile, the effectiveness and engineering applicability are further verified based on an experimental simply supported beam and actual engineering of the I-40 Bridge. The obtained results are good, which indicate that the proposed method is not only suitable for simple structures but also can accurately locate the bearing damage site and identify its severity for complex structure. To summarize, the proposed method provides a good guideline for the issue of bridge bearing detection, which could be used to reduce the difficulty of the traditional bearing failure detection approach, further saving labor costs and economic expenses.

• Biomolecules & Therapeutics
• /
• v.31 no.6
• /
• pp.619-628
• /
• 2023

In the modern era, chronic kidney failure due to diabetes has spread across the globe. Prunetin (PRU), a component of herbal medicines, has a broad variety of pharmacological activities; these may help to slow the onset of diabetic kidney disease. The anti-nephropathic effects of PRU have not yet been reported. The present study explored the potential nephroprotective actions of PRU in diabetic rats. For 28 days, nephropathic rats were given oral doses of PRU (20, 40, and 80 mg/kg). Body weight, blood urea, creatinine, total protein, lipid profile, liver marker enzymes, carbohydrate metabolic enzymes, C-reactive protein, antioxidants, lipid peroxidative indicators, and the expression of insulin receptor substrate 1 (IRS-1) and glucose transporter 2 (GLUT-2) mRNA genes were all examined. Histological examinations of the kidneys, liver, and pancreas were also performed. The oral treatment of PRU drastically lowered the blood glucose, HbA1c, blood urea, creatinine, serum glutamic-oxaloacetic transaminase, serum glutamic pyruvic transaminase, alkaline phosphatase, lipid profile, and hexokinase. Meanwhile, the levels of fructose 1,6-bisphosphatase, glucose-6-phosphatase, and phosphoenol pyruvate carboxykinase were all elevated, but glucose-6-phosphate dehydrogenase dropped significantly. Inflammatory marker antioxidants and lipid peroxidative markers were also less persistent due to this administration. PRU upregulated the IRS-1 and GLUT-2 gene expression in the nephropathic group. The possible renoprotective properties of PRU were validated by histopathology of the liver, kidney, and pancreatic tissues. It is therefore proposed that PRU (80 mg/kg) has considerable renoprotective benefits in diabetic nephropathy in rats.

• Journal of Aerospace System Engineering
• /
• v.18 no.2
• /
• pp.21-28
• /
• 2024

In light of the rapid development of the space industry, there has been increased attention on small satellites. These satellites rely on components that are considered to have lower reliability compared to larger-scale satellites. As a result, predicting reliability becomes even more crucial in this context. Therefore, this study aims to compare three reliability prediction techniques: MIL-HDBK-217F, RiAC-HDBK-217Plus, and FIDES. The goal is to determine a suitable reliability standard specifically for nano-satellites. Furthermore, we have refined the quality assurance factors of the manufacturing company. These factors have been adjusted to be applicable across various industrial sectors, with a particular focus on the selected FIDES prediction standard. This approach ensures that the scoring system accurately reflects the suitability for the aerospace industry. Finally, by implementing this refined system, we confirm the impact of the manufacturer's quality assurance level on the total failure rate.