• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.5
• /
• pp.640-647
• /
• 2004

In order to perform elastic-plastic fracture mechanical analyses, fracture resistance curves for concerned materials are required. The unloading compliance method and the DCPD(Direct Current Potential Drop) method have been widely used for measuring the crack length and the extension for a standard specimen fracture resistance curve test. However it is difficult to apply the unloading compliance method to a real pipe fracture resistance curve test. The objective of this paper is to propose the calibration equation between the normalized crack length and the normalized electric potential, and to apply to pipe fracture experiments. For these, finite element analyses were performed with various current input locations and crack front configurations. Also the 4-point bending jig was manufactured for a pipe test and the DCPD method was used to measure crack extensions and crack lengths for a pipe test. The calculated crack length by the DCPD method agreed with the measured crack length within 5% error.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3660-3671
• /
• 2022

A new methodology to derive a dose constraint for radioactive effluent from a unit of nuclear power plant (NPP) through retrospective assessment was developed to reflect operational flexibility in line with international standards. The new dose constraint can retain the safety margin between the offsite dose and the past dose constraints. As case studies, the new approach was applied to 24 Korean NPPs to address the limitations of the existing seven dose constraints that do not fully comply with current international radiation protection standards. Therefore, an effective dose constraint for Korean NPPs was proposed as no less than 0.15 mSv/y, which is comparable to the international practices and previous studies (0.05-0.3 mSv/y). Although the lower bound of the equivalent dose constraint was calculated as 0.17 mSv/y, it is not proposed in this study since the compliance with the derived effective dose constraint can prevent accompanied equivalent doses to any organs from exceeding equivalent dose limits. The new framework and the case studies are expected to contribute toward and support the revision of existing dose constraints for radioactive effluent from NPPs, ensuring better compliance with the current international safety standards as well as reflect the operational flexibility in practice.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.397-402
• /
• 2003

Fracture resistance curves for concerned materials are required in order to perform elastic-plastic fracture mechanical analyses. Fracture resistance curve is built with J-integral values and crack extension values. The objective of this paper is to apply the load ratio method to the measurement of the crack length for the real scale pipe specimen. For these, the fracture test using the real scale pipe specimen and finite element analyses were performed. A 4-point bending jig was manufactured for the pipe test and the direct current potential drop method and the load ratio method was used to measure the crack extension and the length for the real scale pipe test. Finite element analyses about the compliance of the pipe specimen were executed for applying the load ratio method according to the crack length.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.360-364
• /
• 2009

To verify the suitability of the Railroad safety requirements analysis, the actions of the function which it follows in a given operation condition are composed of the rule model or the state model. And it test must be possible. The subject of condition transfer in compliance with the transfer condition which is an event of system it will be able to accomplish the operation of system. However, tasks allocated to the actor are the duty which is added in organization. This time, the start of duty task is started in compliance with an external or internal condition. If there are 9 tasks which have one objective, the relationship among the previous and the current internal tasks and next tasks which will given is able to show in logical model. Thus when planning an organization, the integral part of class must include Task, Role and Position. And this time we make a series of outputs of examination of organizing model and examples to meet the capable skill.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.627-639
• /
• 2018

Waste management in Jeju Province, Korea, has recently emerged as an urgent problem. The increasing waste discharge requires more landfills but, since it is an island, the available land is restricted. Accordingly, an efficient waste management urgently requires environmentally sustainable policies. In this article, the waste discharge characteristics (such as the amount of waste, its composition, etc.) of Jeju Province have been compared with those in the rest of Korea. The current industrial waste management of two cities on the Island, Jeju City and Seogwipo City, has been also analyzed to suggest policies for an efficient management. The local government's endeavor to enhance environmental awareness of the community has been known to reduce the private cost of policy compliance, and have individuals recognize the results of their policy compliance. Policies to achieve the above are then proposed.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.23 no.2
• /
• pp.194-203
• /
• 2016

Purpose: This study was conducted to test the effect of a scenario based hand hygiene education program on hand hygiene knowledge, hand hygiene perception, hand hygiene compliance and hand hygiene method in nursing students. Methods: A non-equivalent control group, non-synchronized quasi-experimental design was used. Forty five nursing students participated in the study with 22 in the experimental group and 23 in the control group. Data were analyzed using descriptive statistics, ${\chi}^2-test$, t-test, and repeated measures of ANOVA. Results: There were significant increases in hand hygiene knowledge (t=-4.28, p<.001) and accuracy of the hand hygiene method by week (F=7.33, p<.001). However, hand hygiene perception (t=-1.67, p=.102) and hand hygiene compliance rate (F=7.33, p=.405) were not significantly changed. Conclusion: The effects of the scenario based hand hygiene education program provided in this study were excellent, compared to the other hand hygiene education programs. Moreover, as a result of investigating the education effects through direct observation for 4 weeks, appropriate feedback was offered in the third week, and it was found that maintaining the effect was necessary. However, the current status of hand hygiene compliance and accuracy of methods for ensuring hand hygiene need to be studied further.

• YAKHAK HOEJI
• /
• v.54 no.4
• /
• pp.244-251
• /
• 2010

Standardized parenteral nutrition is required to improve patient's safety, clinical appropriateness and to increase uniformity between institution and institutions. We assessed the consistency with the American society for parenteral and enteral nutrition (A.S.P.E.N.) practice guideline for PN by evaluating current practice process for parenteral nutrition formulation in inpatients pharmacies in Korea. Each question in this survey was based on 2007 A.S.P.E.N. recommendations of standard parenteral nutrition formulation, the American society of health-system pharmacists (ASHP), and the United State Pharmacopoeia (USP) Chapter 797 guideline for compounding parenteral nutritions. All 90 Korean society of hospital pharmacist (KSHP) member directors of pharmacy were requested to respond to the survey in order to compare the survey results to ASHP national survey of pharmacy practice in hospital settings (2002) in compliance with A.S.P.E.N. guideline. We had final response rate of 35.6%. 25 (100%) hospitals complied with this Garb guideline (response rate was 84.4%) which was the highest compliance. Only 17.9% of hospital pharmacies were actively involved in complications monitoring. Monitoring complications and efficacy were least in compliance with the A.S.P.E.N. guideline. 69.0% of Korean pharmacists adjusted medication dosage based on disease state or monitoring laboratory data in compliance with the A.S.P.E.N. guideline. Over 50% of the hospital pharmacies failed to provide and evaluate staff training in aseptic manipulation skills periodically. Korean hospital pharmacies need to comply with the standard practice guideline for compounding sterile preparation in order to provide better quality of parenteral nutrition service for specific patient population.

• Journal of Climate Change Research
• /
• v.7 no.3
• /
• pp.283-288
• /
• 2016

In this study, applicability of GHG ETS Offset Program in Korea for a refrigerant sector was analyzed by reviewing foreign management policy and project status in progress related to refrigerants in the disposal stage. In order to derive the implication of the domestic Offset Program, it was looked into approved offset projects and certified offset credits current state in Korea. Offset Program has approved 22 methodologies up to the present, so it is necessary to enhance the accessibility to GHG reduction in various industrial sector including the refrigerant sector by developing appropriate methodologies. In this study firstly, it was investigated that management regulation of countries are managing the refrigerants in the disposal stage such as United States, Japan, Australia. Secondly, of CDM methodologies there were two methodologies associated with the refrigerant reduction(treatment), which were decomposition HFC-23 and destruction of HFC-134a. Also there were a non-registered methodology about destruction of HFC-134a of end of life vehicles. Lastly, in California according to Compliance Offset Program, there was Compliance Offset Protocol in ODS Projects that provided eligible conditions. Based on the review, it was examined the possible conditions for domestic offset project for refrigerant sector

• Asian Journal of Business Environment
• /
• v.9 no.4
• /
• pp.29-34
• /
• 2019

Purpose - The purpose of the research is to assess the current state of cryptocurrency in Vietnam and to provide several solutions and recommendations to the Government, the State Bank of Vietnam (SBV) and other relevant agencies for monitoring, managing, and controlling cryptocurrency effectively and efficiently. Research design, data and methodology - The study is based on the assessment and analysis of cryptocurrency in the world and the real situation of cryptocurrency in Vietnam in order to provide solutions to the controllable development of operation of this currency. Results - The study indicates the current operations of cryptocurrency in Vietnam and provides several suggestions to effectively control this currency. Conclusion - According to the study on current cryptocurrency and the situation of cryptocurrency in Vietnam, the author has proposed a number of solutions to provide suggestions to manage and develop the operations of cryptocurrency in a most practical manner. The governments of many countries in the world, including the Government of Vietnam, need more time as well as appropriate technology improvements to take advantage of these new digital currencies; therefore, they still need to ensure safety in compliance with the control and regulatory capabilities of the central government and central banks.

• Nuclear Engineering and Technology
• /
• v.38 no.7
• /
• pp.639-656
• /
• 2006

In order to apply the leak before break (LBB) concept to nuclear piping systems, the dynamic strain aging effect of low carbon steel materials has to be taken into account, in compliance with the requirements of the Korean Standard Review Guide (KSRG) 3.6.3-1. For this goal, J-R tests are needed for a range of various temperatures and loading rates, including dynamic loading conditions. In the dynamic loading J-R test, the unloading compliance method can not be applied to measure the crack growth and direct current potential drop (DCPD) method; this method also has a problem defining the crack initiation point. The normalization method is known as a very useful method to determine the J-R curve under dynamic loading because it does not need additional equipment or complicated loading sequences such as electric current or unloading. This method was accepted by the American Society for Testing and Materials (ASTM) as a standard test method E1820 A15 in 2001. However, it has not yet been clearly verified yet if the normalization method is sufficiently reliable to be applied to LBB. In this study, the basic background of the J-integral, LBB and dynamic loading J-R test are explained, and the current status for dynamic loading J-R test methods are reviewed from the view point of LBB for nuclear piping. In particular, the theoretical and historical background of the normalization method which has received attention recently, is summarized. Recent studies for this method are introduced and future works are suggested that may improve the reliability of LBB for nuclear piping.