• Journal of Korea Port Economic Association
• /
• v.27 no.1
• /
• pp.247-262
• /
• 2011

This study conducted a SWOT/AHP analysis to prepare a developmental strategy for Gwangyang Port. The SWOT analysis is used to analyze internal and external environment in the strategy stage. The SWOT/AHP analysis was proposed by Kurttila et. al. (2000) to improve usefulness of the SWOT analysis. The results of the SWOT analysis confirm what factors are present in the SWOT group. Therefore, when it is combined with the AHP analysis, it evaluated the relative importance of factors gained from the SWOT analysis and used them to develop strategies. To sum up the results, in the SWOT group, opportunity, strong points, threat and weak points were relatively important in a good order. In respect to factors of the SWOT, for a factor of strength, reasonable freight cost, good port site, and broad hinterland were relatively important. As to factors of weakness, absence of an efficient customs system, a complex transport system and port personnel were relatively important. As to factors of opportunity, an improved transport system through building various infrastructures, consistent development of a connected industrial complex, and increased cargos in northeast area were relatively important. As to threat factors, an improved transport system through building various infrastructure, competition with neighboring ports and small complex transport companies were relatively important.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1791-1797
• /
• 2010

The Urban Transit Standardization Program has been supported by the Ministry of Land, Transport and Maritime Affairs. The Program consists of dozen or more projects and thus is quite complex, which implies that the program success heavily depends upon the effective management of various artifacts during the development. Particularly, in the complex systems development, developing and managing requirements is very important throughout the whole system life cycle. The requirements can be the basis of the design changes to be made later as well as the test and evaluation to be performed in the subsequent stages of the systems development. As such, the derivation of the system's requirement based on the needs from the customers, or stakeholder in a broad sense must be done properly. In particular, notice that the system is being developed but the system requirements are not fully available for some reasons. To complement this situation is the purpose of the study. To derive proper requirements effectively in the process of development, this paper proposes to draw up scenario using the output of the system under development and to utilize the use case diagrams and operational scenarios.

• Journal of Korea Port Economic Association
• /
• v.20 no.1
• /
• pp.95-122
• /
• 2004

This study focuses on analyzing the potentiality of economic integration and the changes in logistics circumstances in Northeast Asia. So far as the changes in logistics circumstances in it, it is emphasized a complex transport system by sea and by land, according to the connection with the Railroad of South-North in Korean Peninsula and the Railroad of the Continent of Siberia. It first considers the propriety of economic integration among Korea, China and Japan in Northeast Asia. The first stage of the economic integration in Northeast Asia means it is started from contracting of FTA(Free Trade Agreement) which just agreed at the Summit Conference among Korea, China and Japan in ASEAN＋3(Korea China. Japan). At that time, the Summit Conference between the three countries have agreed to study on the propriety of FTA charging by own country's research organization. At first China has been hesitated to join with FTA in spite of high growth in his economy, because the time is not yet for it. After all, China also decided himself to participate to FTA together with Korea and Japan by reacted to the stimulus at the conference atmosphere between every country of ASEAN. The discussion on the changes in logistics circumstances also is needed to deal simultaneously with a situation in the economic integration in Northeast Asia. It is worthy to be paid our attention to the restoration of the Railroad of South-North in Korean Peninsula, which was disconnected for a long time from the dispute between South Korea and North Korea. Therefore, it needs to be investigated together with the movement of economic integration in Northeast Asia. The reaction on the restoration of the Railroad of South-North in Korean Peninsula is not only limited to the transport of trade cargo between South Korea and North Korea, but also it is reached to all of Northeast Asia, so far as to all of the area of Russia, Europe, and the other neighbor countries. Because this railroad is connected with the Railroad of the Continent of Siberia. The transport of trade cargo in Northeast Asia have been mostly depended upon the transport by sea until now. However, it would be divided into the transport by sea as well as by land from now. As its economic effect, the restoration of the Railroad of South-North in Korean Peninsula could be not only contributed to reduce the cost of logistics within South Korea and North Korea, but also within or without in Northeast Asia, Russia, and Europe. Consequently, it could be improved the power of international competitiveness of goods in Northeast Asia, according to the formation of a complex transport system together with the transport by sea and by land.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.3
• /
• pp.264-271
• /
• 2013

A method of multiple transport-aircraft mission modeling is proposed in order to improve the efficiency of evaluating and optimizing pre-mission plans. To deal with the challenge of multiple transport-aircraft missions, the object-oriented modeling method is utilized. The elements of the mission are decomposed into objects and businesses, And the major mission objects and their important properties are summarized. A complex mission can be broken down into basic business modules such as the ground section and flight section. The business models of loading and fueling services in the ground section are described. The business model of the flight section is composed of an air route and flight profile with the flight equation and the fuel consumption model. The logical relationship of objects and business modules is introduced. The architecture of the simulation system, which includes a database, computation module, graphical user interface (GUI) module, and a result analysis module, is established. A sample case that includes two different plans is provided to verify the model's ability to achieve multi-aircraft composite mission simulation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09b
• /
• pp.1189-1192
• /
• 2005

Due to their slow degradation properties, hydrophobic organic contaminants in estuarine sediment have been a concern for risks to human health and aquatic organisms. Studies of fate and transport of these contaminants in estuaries are further complicated by the fact that hydrodynamics and sediment transport processes in these regions are complex, involving processes with various temporal and spatial scales. In order to simulate and quantify long-term attenuation of Polycyclic Aromatic Hydrocarbons (PAH) in the Elizabeth River, VA, we develop a modeling approach, which employs the U.S. Environmental Protection Agency's water quality model, WASP, and encompasses key physical and chemical processes that govern long-term fate and transport of PAHs in the river. In this box-model configuration, freshwater inflows mix with ocean saline water and tidally averaged dispersion coefficients are obtained by calibration using measured salinity data. Sediment core field data is used to estimate the net deposition/erosion rate, treating only either the gross resuspension or deposition rate as the calibration parameter. Once calibrated, the model simulates fate and transport PAHs following the loading input to the river in 1967, nearly 4 decades ago. Sediment PAH concentrations are simulated over 1967-2022 and model results for Year 2002 are compared with field data measured at various locations of the river during that year. Sediment concentrations for Year 2012 and 2022 are also projected for various remedial actions. Since all the model parameters are based on empirical field data, model predictions should reflect responses based on the assumptions that have been governing the fate and sediment transport for the past decades.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.152-161
• /
• 2022

Recently, it is recognized as a high-cost and inefficient logistics system that increases traffic congestion and environmental problems due to an increase in traffic volume due to the activation of the online market. In order to solve inefficient problems such as unavoidable traffic congestion and environmental problems caused by the increase in traffic volume, it is necessary to develop a freight transport system technology using the existing urban railway infrastructure and freight-only urban railway. The urban subway logistics system is a logistics system that requires a combination of various technologies to solve the nationwide demand for urban logistics and road traffic problems. This paper recognized the existing traffic congestion and environmental pollution of road traffic as problems, and supplemented the contact point requirements presented above by identifying the sub-systems constituting the target system and supplementary points for each part-level contact point. In this study, as a complex system operated for one purpose by grafting various technologies, a plan is required to secure the reliability and safety of operation from various viewpoints. The results of this study can contribute to the initial configuration and basic data to solve the interface bottleneck of the urban subway logistics system to be promoted in the future.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.83-89
• /
• 2001

This paper provides a short description of the COMPASS-model which is a concept for the simulation of multiway systems. The focus of the COMPASS-model is to offer an opportunity to investigate the effects of redistribution strategies on logistic and monetary values in a system of returnable transport items (RTI). The modeling concept consists of five modules: topology, system load, distribution, redistribution, cost. It includes the integration of highly sophisticated evolutionary algorithms for the optimal solving of complex capacitated vehicle routing problems (CVRP) which are typical for RTI-systems. The results of first experiments with a COMPASS-based prototype are repeated. They reveal some basic regularities in RTI-systems.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.373-377
• /
• 2023

The Monte Carlo (MC) method has become an indispensable part of the nuclear radiation research field. Several widely used and well-known MC packages were developed for simulation of radiation transport and interaction with matter. All these MC packages require users to prepare an input script. The input script can become lengthy for complex models. The process of preparing these input scripts is time-consuming and error-prone. In the present work, we have developed an open-source GUI computer program for modelling radiation transport and interaction in multi-segmented slab phantoms using grid-based system for the widely used PHITS MC package. The developed tools would be useful for future users of PHITS MC package and particularly inexperienced users. The present program is distributed under GPL license and all users can freely download, modify and redistribute the program without any restrictions.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3665-3676
• /
• 2023

The use of ion exchange resins to remove ionic impurities from solution is prevalent in industrial process systems, including in the primary heat transport system (PHTS) purification circuit of nuclear power plants. Despite its extensive use in the nuclear industry, our general understanding of ion exchange cannot fully explain the complex chemistry in ion exchange beds, particularly when operated at or near their saturation limit. This work investigates the behaviour of mixed-bed ion exchange resin, saturated with species representative of corrosion products in a CANDU (Canadian Deuterium Uranium) reactor PHTS, particularly with respect to iron chemistry in the resin bed and the removal of lithium ions from solution. Experiments were performed under deaerated conditions, analogous to normal PHTS operation. The results show interesting iron chemistry, suggesting the hydrolysis of cation resin bound ferrous species and the subsequent formation of either a solid hydrolysis product or the soluble, anionic Fe(OH)₃^-.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.2
• /
• pp.34-39
• /
• 2014

Airworthiness authorities specify the technical standards of airworthiness that propose minimum requirement of the commercial transport category and apply the rules in the certification process to ensure the safety of the aircraft. The Federal Aviation Administration and other national airworthiness authorities define the fatal accident risk levels for the safety assessment of the aircraft system and establish standard procedures to apply both qualitative and quantitative analysis techniques. However, an accident or incident may occur by the combination of various factors, although the aircraft is designed in accordance with the strict standards and approval by the Airworthiness Authorities. There are some key factors, such as human error, unpredictable complex system failures, degradation of the components reliability, improper maintenance task and intervals. Risk can be reduced by reflecting aircraft operational experience with similar types of aircraft in the process of aircraft development and safety assessment. Result of the root cause analysis for the Airbus A300-600 incident in which the aircraft engine reverser was deployed in the air have been introduced to reflect the design of system and related components. Also, this paper suggests to create a big-database in order to provide a feed-back to the FAR Part 25 transport category design and safety assessment of the operational experience.