• Journal of Environmental Science International
• /
• v.18 no.9
• /
• pp.941-952
• /
• 2009

The urban microscale wind field around the air quality monitoring station was investigated in order to check how a building complex influences it. For this study as the high density areas Jwa-dong and Yeonsan-dong monitoring sites in Busan were chosen. As the direction of inflow which is perpendicular to the building of the monitoring station was expected to cause the considerable variation of the wind field, that direction was selected. The model Envi-met was used as the diagnostic numerical model for this study. It is suitable for this investigation because Envi-met has the microscale resolution. After simulating it, on the leeward side around a building complex the decrease of flow velocity and some of vortexes or circulation area were discovered. In addition, on the edge of the top at the building and at the back of the building the upward flow was developed. If the sampling hole of monitoring site were located in this upward flow, it would be under the influence of upward flow from the near street.

• Journal of Power Electronics
• /
• v.19 no.4
• /
• pp.1034-1044
• /
• 2019

In medium-voltage and high-voltage high-power converters, the switching devices need to operate at a low switching frequency to reduce power loss and increase the power capacity. This increases the delay of the signal sampling and PWM. It also makes the cross-couplings of the d-q current components more severe. In addition, the LCL filter has three cross-coupling loops and is prone to resonance. In order to solve these problems, this paper establishes a complex vector model of an LCL type grid-connected converter. Based on this model, two multiple decoupling current control strategies with passive damping / notch damping are proposed for the LCL type grid-connected converter. The proposed strategies can effectively eliminate the cross-couplings of the converter, achieve independent control of the d-q current components, expand the stable region and suppress the resonance of the LCL filter. Simulation and experimental results verify the correctness of the theoretical analysis and the feasibility of the proposed strategies.

• Korean Journal of Occupational Health Nursing
• /
• v.30 no.2
• /
• pp.37-45
• /
• 2021

Purpose: This study aimed to investigate the influence of workplace violence experience on depression among female caregivers in Korea. Methods: This study was a secondary data analysis of data from the 5th Korean Working Conditions Survey (KWCS). The study sample consisted of 484 female caregivers. IBM SPSS 25.0 was used for complex sample analysis, which considered sampling the weights of variables. Based on the survey questions, we used complex sample cross-tabulation and the complex sample general linear model (CSGLM). Results: About 10.1% of female caregivers experienced workplace violence. The factors influencing workplace violence experience on depression were organizational justice (p=.048) and illness (p=.004). However, in cases with no violence, the influencing factors were psychological work environment (p=.001), work environment satisfaction (p=.024), and work engagement (p=.004). Conclusion: Caregivers are vulnerable to workplace violence. Therefore, it is necessary to formulate a policies such as organizational justice, work environment satisfaction, and work engagement to improve the working environment.

• The Journal of Korea Robotics Society
• /
• v.18 no.3
• /
• pp.337-345
• /
• 2023

In this paper, we propose a 3D LiDAR sensor-based costmap generation and path planning algorithm using it for reliable autonomous flight in complex indoor environments. 3D path planning is essential for reliable operation of UAVs. However, existing grid search-based or random sampling-based path planning algorithms in 3D space require a large amount of computation, and UAVs with weight constraints require reliable path planning results in real time. To solve this problem, we propose a method that divides a 3D space into several 2D spaces and a path planning algorithm that considers the distance to obstacles within each space. Among the paths generated in each space, the final path (Best path) that the UAV will follow is determined through the proposed objective function, and for this purpose, we consider the rotation angle of the 2D space, the path length, and the previous best path information. The proposed methods have been verified through autonomous flight of UAVs in real environments, and shows reliable obstacle avoidance performance in various complex environments.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.4
• /
• pp.310-321
• /
• 2007

Status of benzene exposure was evaluated upon petrochemical workers in the Yeosu Industrial Complex, based on questionnaire responses by workers, review of previous work environment assessment reports between 1996 and 2004, in addition to short-term exposure measurements for unit tasks in the field. Questionnaire results showed that workers in the field were suffering concern on and symptoms of respiratory diseases, cancers or other illnesses of unknown causes. In particular, workers were highly worried about the risk of exposure to chemical hazards including benzene, while conducting specific tasks (e.g. sampling, draining, gauging) among normal operations during which equipments are opened and contents are exposedin the air, as well as periodic turnaround (TA) task. However, the review of previous work environment assessment reports found out that short-term exposure assessment data for unit tasks accounted for less than 1% of total data, and most of them were on 8-hr average exposure level. It also turned out that benzene was not detected in 83% of total samples, suggesting routine but pointless sampling has been repeated. Short-term exposure level was assessed focusing on tasks with high level of complaints on the exposure risk, based on the questionnaire responses. As predicted, a maximum of 741 ppm benzene exposure was reached depending on types and conditions of operations involved. In conclusion, these findings suggest that the evaluation and management on the short-term high exposure tasks including turnaround are crucial in reducing benzene exposure and preventing haematopoietic cancer in workers in the petrochemical industry.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.1 no.1
• /
• pp.77-90
• /
• 1981

This study involves 1) air quality disperson predictions and 2) a comparison of the predicted data with the actually measured ones in terms of annual sulfur dioxide concentration in the Ulsan Industial Complex. The prediction was made by utilizing the CDMQC air quality simulation computer model. The higher concentrations were observed at the Bugok Dong (Sampling Site) and the Yeochun Dong Sampling Site with the values of 44 and 46 ppb, respectively whereas the predicted values for both sites were 52 and 47 ppb, respectively. A statistical examination has revealed that the level of confidence was 90.02% from the Chi-squared test and the corelation coefficient was 0.827. It thus demonstrates that the model used for the study appears to be applicable to yield reliable predictions in terms of annual sulfur dioxide concentrations in the study area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7A
• /
• pp.794-806
• /
• 2004

This paper deals with correction of frequency offset and analysis of quantization angle noise in the IEEE 802.1la OFDM system. The rotation phase per symbol due to the carrier frequency offset is estimated from auto-correlation of the short Preambles, which are over-sampled for the reduction of noise in OFDM signals. The pilot signals are introduced to estimate the rotation phase per OFDM symbol due to estimation error of the carrier frequency offset and the sampling frequency onset. During the estimation and correction of the frequency onsets, a CORDIC processor and a look-up table are used for the conversion between a rotation phase and its complex number. Being calculated by a limited number of bits in the CORDIC processor and the look-up table, the rotation phase and its complex number have quantization angle errors. The quantization errors are analyzed as SNR (signal to noise ratio) due to the quantization bit numbers. The minimum bit number is suggested to meet the specification of IEEE 802.1la properly. Finally, the quantization errors are evaluated through simulations on number of quantization bits and SNR of received signals.

• Journal of Korean Society on Water Environment
• /
• v.23 no.1
• /
• pp.161-168
• /
• 2007

The main aim of this work is focus on the Geum river water quality evaluation of pollution data obtained by monitoring measurement during the period 2001-2005. The complex data matrix 19 (entire monitoring stations)*13 (parameters), 60 (month)*13 (parameters) and 20 (season)*13 (parameters) were treated with different multivariate techniques such as factor analysis/principal component analysis (FA/PCA). FA/PCA identified two factor (19*13) classified pollutant Loading factor (BOD, COD, pH, Cond, T-N, T-P, $NH_3$-N, $NO_3$-N, $PO_4$-P, Chl-a), seasonal factor (water temp, SS) and three Factor (60*13, 20*13) classified pollutant Loading factor (BOD, COD, Cond, T-N, T-P, $NH_3$-N, $NO_3$-N, $PO_4$-P), seasonal factor (water temp, SS) and metabolic factor (Chl-a, pH). Loadings of pollutant factor is potent influence main factor in the Geum river which is explained by loadings of pollutant factor at whole sampling stations (71.16%), month (52.75%) and season (56.57%) of main water quality stations. Result of this study is that pollutant loading factor is affected at Gongju 1, 2, Buyeo 1, 2, Gangkyeong, Yeongi stations by entire stations and entire month (Gongju 1, Cheongwon stations), April, May, July and August (buyeo 1) by month. Also the pollutant Loading factor is season gives an influence in winter (Gongju 1, buyeo 1) from main sampling stations, but Cheongwon characteristic is non-seasonal influenced. This study presents necessity and usefulness of multivariate statistic techniques for evaluation and interpretation of large complex data set with a view to get better information data effective management of water sources.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.917-922
• /
• 2018

In the conventional interchannel interference self-cancellation (ICI-SC) schemes, the length of sampling window is the same as the symbol length of orthogonal frequency division multiplexing (OFDM). Thus, the number of complex operations to compute the interference coefficient of each subchannel is significantly increased. To solve this problem, we present an approximated mathematical model for the coefficients of ICI-SC schemes. Based on the proposed approximation, we analyze mean squared error (MSE) and computational complexity of the ICI-SC schemes with the length of sampling window. As a result, the presented approximation has an error of less than 0.01% on the MSE compared to the original equation. When the number of subchannels is 1024, the number of complex computations for the interference coefficients is reduced by 98% or more. Since the computational complexity can be remarkably reduced without sacrificing the self-cancellation capability, it is considered that the proposed approximation is very useful to develop an algorithm for the ICI-SC scheme.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.4
• /
• pp.545-554
• /
• 2019

Objectives: The purpose of this study was to compare the general health status and oral health status based on periodical dental preventive experience, and to find methods for regular dental prophylaxis, using the data obtained from the $7^{th}$ National Health and Nutrition Survey. Methods: This study was performed using data collected from the $7^{th}$ National Health and Nutrition Examination Survey (KNHANES). A total of 9,015 participants were selected for the study. Statistical analysis was performed using SPSS 21.0, with data obtained from a complex sampling design, and a significance level of 0.05 was set. General characteristics of the participants, oral health status, and recent preventive dental treatment were examined for a complex sampling frequency analysis, and the differences in distribution were analyzed using chi-square test. Results: The group that recently under went dental prophylaxis, when compared to the group that had not under gone dental prophylaxis recently, reported several 'no obstacles' for all items of the EQ-5D (p<0.05). Moreover, the group that recently underwent dental prophylaxis used all the oral care products (p<0.05). Conclusions: It is necessary to actively expand institutional supervision so that regular dental preventive measures can be undertaken to promote oral health that affects general health.