• 한국건축시공학회지
• /
• 제5권3호
• /
• pp.109-116
• /
• 2005

Recently, there have been many studies seeking towards the utilization of cementitious powder from concrete waste as recycled cement. However, most of the studies actually have been researches about the reuse of mortar or paste, not concrete waste. In fact, either mortar or paste is quite different from a real concrete waste in terms of age and mixture. Thus the purpose of this study is to examine basic physical properties of recycled cement, manufactured with cementitious powder from concrete waste, and analyze differences in chemical and hydraulic properties of the cement and its tested model. As a result of the chemical analysis, recycle cement is composed mainly of CaO and $SiO_2$, and that it is even lower in the content of CaO than Portland cement, which is also supported by previous studies. But, Differently from previous studies, calcining temperature of 650 was found an optimal condition under which cementitious powder from concrete waste could restore its hydraulic properties.

• 자원리싸이클링
• /
• 제22권6호
• /
• pp.26-32
• /
• 2013

폐촉매 염산 침출액으로부터 백금을 회수하기 위해 벤치규모의 Karr 왕복 추출기를 사용하였다. 최적의 유량속도와 진동 빈도에서 철과 백금은 TBP와 Aliquat 336에 의해 모두 추출되었다. 같은 진동 빈도에서 유량을 조절함으로써 염산과 과염소산을 사용하여 철과 백금을 모두 탈거하였다. TEHA를 사용하여 추출여액으로부터 염산을 추출하는 경우 컬럼 추출기의 안정성을 유지하기 어려웠다. 컬럼 추출기와 mixer-settler에 의한 조업 결과를 비교하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.693-698
• /
• 2001

This paper establishes a coding method system including the liberation and size distribution of recycling materials in the shredder operation. Every particle in the shredded product becomes a code number using the liberation model and size distribution equation transforming of weight percentage into particles number percentage. One set of database can be obtained after all particles have been coded. This database is suitable for the size reduction operation in the process simulation of waste recycling. Coupling with the developed air classification, sizing and separating operations, the whole process simulation will be completely established for diversified application. A typical simulation for the rolling cutting shredder product of waste TV had been demonstrated under this coding system. The breakage size distribution of Gaudin and Schumann equation were selected for the shredding operation simulation. The Gaudin's liberation model was suitable fur the liberation simulation. Both of these equations were transformed weight percentage into particles distribution for the necessary of particle coding method. A better recycling operation for this shredded solid waste can be concluded from the comparison of simulation results with their sorted grade, recovery or economic of materials in different processes.

• 자원리싸이클링
• /
• 제9권2호
• /
• pp.11-17
• /
• 2000

니켈의 소비량은 계속 중가 추세에 있으며, 이와 함께 2차전지, 페라이트 페촉매는 사용 후의 폐기물이 연속적으로 발생하고 있다. 이들 중 본 연구에서는 Ni-Cd 2차전지 폐기물을 이용하여 니켈 회수를 수행하였다 폐전지의 구성은 니켈이 24wt% 칠이 30wt%, 카드뮴이 18.5wt%, 그리고 산소와 절연물 등으로 이루어져 있었다. 금속 회수의 방법은 침출 후 용매 추출법을 적용하였다. 염산침출에서는 1N 이상의 농도에서 카드뮴이 100% 침출되었고, 니켈은 20,000ppm이상 침출되어 70%이상의 침출율을 보였다. 산침출에서 얻은 침출액은 30vol%의 MSP-8로서 카드뮴만 추출하고 니켈은 잔류액으로 분리할 수 있었다. 그리고 암모늄염에 의한 침출에서는 $NH_4NO_3$에 의한 침출 시 니켈과 카드뮴만을 선택적으로 침출하는데 우수하였다. 질산암모늄에 의해 얻은 침출액 중의 Ni LIX계 추출제를 이용하여 100% 회수할 수 있었고, 잔류액 중의 카드뮴은 D2EHPA로 75% 이상 회수할 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.109-112
• /
• 2006

Social and environmental pressures draw greater significance on the recycling of the waste. Particularly, waste concrete is particularly crucial among the construction wastes in terms of conservation of natural construction resources as well as disposal crisis. The technology to recycle the waste concrete has been improved. This study has various replacement levels of natural fine aggregate with recycled fine aggregate while coarse aggregate is completely replaced with the recycled coarse aggregate and herein fundamental properties investigated include compressive strength, shrinkage and dynamic modulus of elasticity. As a result, it is anticipated that the recycled aggregate concrete can be successfully applied to structural concrete members provided a proper recycling process, mix design and curing method are practiced.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.81-87
• /
• 2003

The purpose of this study is the development of a recycling process to recover the hydrated ability of cement hydrate which accounts for a large proportion of cementitious powder by concrete waste in order to recycle cementitious powder by concrete waste as recycle cement. Therefore, after having theoretical consideration based on the properties of high-heated concrete, we consider the properties of hydration of cementitious powder in hardened mortar under various temperature conditions. As a result of experiment, it is revealed that an effective development of recycling cement is possible since the cementitious powder by concrete waste recovers a hydraulic property during burning at $600^{\circ}C$ or $700^{\circ}C$. And it is shown that the fluidity of mortar decreases rapidly as the burning temperature of recycle cement increases. however, the improved effect of fluidity is predominant if adding the additive such as fly-ash or blast furnace slag.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2006년도 고분자리싸이클링 심포지엄
• /
• pp.3-12
• /
• 2006

The main feature of these total technologies is that we can constitute the optimum treatment scheme fitting to the property of wastes, amount of wastes and energy requirement. For high moisture content wastes or biomass resources, high pressure steam process (MMCS) for crush, dry and deodorize wastes to produce high quality fertilizer of fuel is most appropriate. For dry or semi-dry solid wastes, the STAR-MEET system can be applied to produce low-BTU gases for power generation using duel fueled diesel engines of Stirling engines, and the REPRES and HyPR-MEET systems can be applied to produce hydrogen rich medium-BTU gas. For waste plastics and oils, liquefaction technology is best fit to produce light oil or kerosene equivalent fuel oils. These total technologies are completely different from the existent waste treatment technologies based on land-filling or incineration, and are expected to disseminate all over the world in the near future.

• 자원리싸이클링
• /
• 제6권3호
• /
• pp.36-40
• /
• 1997

A series of processes has been developed to recover the gold from electronic scrap containing about 200~600 ppm Au. First, mechanical beneficiation including shredding, crushing and screening was employed. Results showed that 99 percent of gold component leaves in the fraction of under 1mm of crushed scrap and its concentration was enriched to about 800 ppm without incineration. The crushed scrap was leached in 50% aqua regia solution and gold was completely dissolved at $60^{\circ}C$ withing 2 hours. Other valuable metals such as silver, copper, nickel and iron were also dissolved. The resulting solution was boiled to remove nitrous compounds in the leachate. Finally, a newly designed electrolyzer was tested to recover the gold metal. More than 99% of gold and silver were recovered within an hour by electrowinning process.

• 한국분말재료학회지
• /
• 제28권2호
• /
• pp.91-96
• /
• 2021

Rare earth magnets with excellent magnetic properties are indispensable in the electric device, wind turbine, and e-mobility industries. The demand for the development of eco-friendly recycling techniques has increased to realize sustainable green technology, and the supply of rare earth resources, which are critical for the production of permanent magnets, are limited. Liquid metal extraction (LME), which is a type of pyrometallurgical recycling, is known to selectively extract the metal forms of rare earth elements. Although several studies have been carried out on the formation of intermetallic compounds and oxides, the effect of oxide formation on the extraction efficiency in the LME process remains unknown. In this study, microstructural and phase analyses are conducted to confirm the oxidation behavior of magnets pulverized by a jaw crusher. The LME process is performed with pulverized scrap, and extraction percentages are calculated to confirm the effect of the oxide phases on the extraction of Dy during the reaction. During the L ME process, Nd is completely extracted after 6 h, while Dy remains as Dy₂Fe₁₇ and Dy-oxide. Because the decomposition rate of Dy₂Fe₁₇ is faster than the reduction rate of Dy-oxide, the importance of controlling Dy-oxide on Dy extraction is confirmed.

• 한국항행학회논문지
• /
• 제14권3호
• /
• pp.426-431
• /
• 2010

태양전지용 웨이퍼 제조공정에 있어 Slurry의 가격 비중은 약 68% 정도로 매우 큰 비중을 차지하고 있기 때문에, 제조비용 절감측면과 Wafering 원가혁신 및 산업폐기물 처리비용 절감효과, 환경오염 방지를 위해 Slurry의 순환 사용은 필수적이다. 기존 Slurry를 재생하는 방식은 물리적인 원심분리(데칸터) 방식을 이용한 방법을 사용하고 있으나 미분(微粉)이 남아 있어 재생품질에 한계가 있고, 대부분 액체, 100% 오일과 분리되지 않은 상태로 재생된다. 이 상태를 건조시키는 경우도 순도가 많이 떨어진다. 본 논문에서는 원심분리(데칸터) 방식과 케미컬 방식을 함께 사용하여, 태양전지 Wafering 공정에서 필수적인 Slurry를 재생함에 있어, 원심분리에 의한 재생품질의 한계를 극복할 수 있는 재생기술을 개발하였고, Slurry 재생에 대한 Total Solution을 제공하여 성능을 향상시키고 재생 회수율을 높였다.