• 한국정밀공학회지
• /
• 제18권12호
• /
• pp.110-115
• /
• 2001

In this paper, a multiple comparison was proposed to minimize the amount of coolant. And new coolant level, called "low level", was suggested to show usefulness of multiple comparison for experiments. The amount of this levee is about 1/4 of conventional coolant amount-called "high level", and dry cutting is called "none level". Using these coolant levels, the cutting temperatures of each coolant level in turning process were analyzed by analysis of variance(ANOYA)-test and a multiple comparison. As the result of ANOVA-test, we have just known that the average of temperature of each coolant level is not equal. However by Tukey's HSD, one of multiple comparison. it was analyzed that the average of temperature of low level is similar to that of high levee and different from that of none level.erent from that of none level.

• 한국기계가공학회지
• /
• 제7권3호
• /
• pp.61-66
• /
• 2008

For the production of urethane prepolymer, the effect of process parameters such as diisocyanate MDI and polyol TDI was tested. In this paper, design of experiments has been adopted for studying the effect of the process parameters on the improvement of NCO and viscosity of pre-polymer. As a result of comparison of different parameters, the effect of polyol was stronger than that of isocyanate in comparison of reactivity according to the amounts of isocyanate and polyol. Especially, NCO and viscosity of pre-polymer affected a product safety.

• 산업경영시스템학회지
• /
• 제15권26호
• /
• pp.189-199
• /
• 1992

Standard acceptance sampling plans models the production process as a sequence of independent identically distributed Beruoulli random variables. However, the quality of items sampled sequentially from an ongoing production process often exhibits statistical dependency that is not accounted for in standard acceptance sampling plans. In this paper, a dependent production process is modelled as an ARMA process and as a two-state Markov chain. A simulation study of each is performed. A comparison of the probability of acceptance is done for the simulation method and for the approximation method.

• 한국전자거래학회지
• /
• 제18권4호
• /
• pp.145-167
• /
• 2013

본 논문에서는 조선 산업에서 블록 조립 작업에 대한 계획 프로세스와 실적 프로세스를 비교하는 방법을 제안한다. 제안한 방법은 계획과 실적 데이터 기반으로 프로세스 마이닝 기법을 이용하여 프로세스 모델을 도출하고 비교 분석을 수행하는데, 분석 절차는 1) 데이터 전처리, 2) 분석 수준의 정의, 3) 조립 블록 군집화, 4) 군집별 프로세스 모델 도출, 5) 계획과 실적 프로세스 모델 비교, 다섯 단계로 구성된다. 단계 5에서는 프로세스 모델, 작업, 프로세스 인스턴스, 모델 적합도와 같은 다양한 관점에서 계획과 실적의 프로세스를 비교할 것을 제안하고, 각 관점별 비교 인자들을 정의한다. 특히, 적합도 관점에서는 교차 적합도를 정의하여, 도출된 프로세스 모델에 대해 자신의 데이터에 대한 적합도뿐만 아니라, 상대 데이터(계획 모델의 경우 실적 데이터, 실적 모델의 경우 계획 데이터)에 대한 적합도를 계산하고 비교 분석할 것을 제안한다. 제안한 방법의 효용성은 세계 최고 수준의 국내 조선 업체의 블록 조립 계획 시스템과 블록 조립 모니터링 시스템의 실제 데이터를 이용하여 사례 연구를 통해 설명하고 검증하였다.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 2005년도 e-Biz World Conference 2005
• /
• pp.130-134
• /
• 2005

This research describes the comparison broker's role and its effectiveness measurement using a developed logical framework of comparison shopping service. And verifies that seller-led comparison challenge method provide comparison information of products to buyers more efficiently. In electronic commerce, buyer's satisfaction of purchase (S) can be defined as an interactive function between seller's competitiveness vector (P) of products that supplied to the market, and buyer's informed level vector (B) of products that is known from a lot of sources. Then the buyer's informed level can be changed through the information analysis among products by transformation process using comparison matrix (C). So the role of comparison shopping is to construct a comparison matrix and to serve it to the buyers, and to change the buyer's informed level. The changed informed level influences a buyer's satisfaction, that improved satisfaction of purchase is defined as the effectiveness of comparison shopping. As a perfect provision and usage of comparison matrix is impossible cause of cognitive limit, the most efficient method for improving the comparison effectiveness is the comparison challenge that detects the comparison elements of the largest buyer's information efficiency, and then to be compared between elementary products selectively. This research verifies the substantial superiority of comparison challenge through television market data experiments.

• 산업경영시스템학회지
• /
• 제25권4호
• /
• pp.61-68
• /
• 2002

This paper provides a method of consciousness structure analysis for research and development project evaluation using fuzzy structure modeling(FSM). Fuzzy structure modeling, which is a modeling method for consciousness structure, has a large number of pairwise comparison by human subjective judgement and is difficult to check the consistency index of denoting the precision for human judgement. Thus, in this paper, we analyzed the structure of consciousness by fuzzy structural modeling method, introducing the concept of pairwise comparison matrix in Analytic Hierarchy Process.

• 한국물환경학회지
• /
• 제21권6호
• /
• pp.664-668
• /
• 2005

An experimental study for the comparison of nitrogen and phosphorus removal efficiencies between $A^2/O$ and modified Phostrip (M-Phostrip process) were carried out with bench-scale reactors. In case of nitrogen removal efficiencies both of processes showed similar ones when influent organic loadings were high. However, M-phostrip process was more effective than $A^2/O$ at low organic loadings. This is why M-phostrip process consumes the whole mass of influent organics as a carbon sources for denitrification in anoxic reactor but the anoxic reactor of $A^2/O$ process utilizes the residual carbon followed by consumming a part of influent carbon for phosphorus release in anaerobic reactor. $A^2/O$ process required the influent COD/T-P and COD/TKN ratios were more than 56 and 10, respectively, to take place the phosphorus release in anaerobic process and phosphorus uptake in oxic process. However, the luxury uptake of phosphorus in M-phostrip process was not affected by influent COD/T-P and COD/TKN ratios and the adverse effect of nitrate in return sludge introduced to the p-stripper from the 2nd clarifier was not significant due to the configurational advantage of the p-stripper.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.208-211
• /
• 2001

In the drawing from round billet to non-circular section there are two different processes through solid hole die(HD) and the other cassette roller dies(CRD). The CRD process has several cassette type rollers and a billet is able to move through the given gaps between two profiled rollers. The objective of this study is based on the analysis and evaluation of two aforementioned processes using experiments and finite element simulation. In order to simulate the multi-stage drawing process from circular sectioned billet to rounded square section, the finite element analysis is applied to the process using a commercially available DEFORM-3D code. Two types of experimental drawing tests through designed and manufactured dies for pure copper and aluminum alloy are carried out at room temperature. The analysis included comparison of material properties before and after drawing of each process and also provide some useful information by a FEM simulation.

• Journal of Welding and Joining
• /
• 제16권6호
• /
• pp.104-112
• /
• 1998

In the previous study, the countermeasure for welding deformation of bracket tilt is through up through experimental inspection for total process including welding process. For completeness of systematic examination of parts having sensitivity on welding deformation, the comparison and feedback between the result through simulation of welding process and experimental data is needed. In other words, it is necessary to control welding deformation that construct the prediction system for welding deformation through comparison and tuning with experimental data. In the present study, the application of FEA on welding process of bracket tilt with susceptibility to deformation is made and deformation behavior through change of welding sequence is focused on. It is used to improve the exactness of deformation analysis that three dimensional analysis for moving heat source, activated and deactivated bead element, and volume heat flux etc.

• 디지털산업정보학회논문지
• /
• 제9권4호
• /
• pp.167-175
• /
• 2013

This study is the process of making high-definition TV broadcast color correction affects the end result comparison is focus on implement through study. In the production process and the impact on the color Correction in the video as an study for UHD, 4K, 6K video production workflow improvement of an effective program in the present and time and cost in the post production process, color correction for the final video through the production and overcome the failure of further in-efficient color correction study will help you to solve the problem. This study is the color changes over the course of the final video to see how much influence color correction of post-production. Color correction using a program of courses in Visual quality, regularly presented the possibility to retain and make on high definition video production post-production process for color correction method is utilized as the basis of study.