• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.360-366
• /
• 1989

Reduced order steady state models for separation columns are developed. The accuracy and efficiency of the reduced order models are also demonstrated by comparing the simulation results obtained using the reduced order models with rigorous tray by tray calculations.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.126-134
• /
• 2014

This study investigates the structural strength analysis due to rib thickness of lower arm. At structural analysis, model 1 has the most deformation by comparing three models. As most equivalent stress is shown at the part connected with wheel knuckle, the strength becomes weaker in cases of three models. At fatigue analysis, model 1 becomes most unstabilized among three models. Model 3 has most fatigue life and the next model is model 2. The range of maximum harmonic response frequencies becomes 140 to 175Hz in cases of three models. Because the critical frequency at model 3 becomes highest among three models but the stress exceeds yield stress, model 3 becomes most unstabilized at vibration durability. As models 1 and 2 has less than yield stress, these models become stabilized. Model 2 becomes most favorable by comparing three models at structural, fatigue and vibration analyses. This study result can be effectively utilized with the design of lower arm by investigating prevention against damage and its strength durability.

• 한국컴퓨터정보학회논문지
• /
• 제24권7호
• /
• pp.61-69
• /
• 2019

In this paper, a classification method of random graph models is proposed and it is based on centralities of the random graphs. Similarity between two random graphs is measured for the classification of random graph models. The similarity between two random graph models $G^{R_1}$ and $G^{R_2}$ is defined by the distance of $G^{R_1}$ and $G^{R_2}$, where $G^{R_2}$ is a set of random graph $G^{R_2}=\{G_1^{R_2},...,G_p^{R_2}\}$ that have the same number of nodes and edges as random graph $G^{R_1}$. The distance($G^{R_1},G^{R_2}$) is obtained by comparing centralities of $G^{R_1}$ and $G^{R_2}$. Through the computational experiments, we show that it is possible to compare random graph models regardless of the number of vertices or edges of the random graphs. Also, it is possible to identify and classify the properties of the random graph models by measuring and comparing similarities between random graph models.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.50-53
• /
• 2003

We describe a method for estimating new hand views from a single 2D hand image using decomposed approach with subgroup-based scheme. With this method, we can get the simplicity in the sense of computation by comparing the image with models in the promising subgroup instead of comparing with all models. It shows more effectiveness in recognition by process depend on each subgroup and easy of extension.

• 통상정보연구
• /
• 제4권2호
• /
• pp.97-119
• /
• 2002

This research purposes on comparing some e-trailing models in character and presenting the obstacles of e-trailing activation and the solutions, e-trailing models this research has studied are 1) Bolero, 2) TradeCard, 3) BeXcom, 4) Identrus, and 5) TEDI etc. Comparing characteristic points of the e-trading models are as follows ; 1) Access ways as a global e-trading model, 2) Structural characteristic, 3) Functional characteristic, 4) Role as a global e-trading model, 5) Legal issues, 6) Application issues in practice, 7) Security issues for Technology.

• 한국컴퓨터정보학회논문지
• /
• 제26권8호
• /
• pp.157-164
• /
• 2021

회귀분석은 반응변수와 예측변수들 간의 관련성을 설명하기 위해 사용되는 잘 알려진 통계 테크닉이다. 특히 연구자들은 두 개의 독립 모집단에서의 모형들의 회귀계수들(절편과 기울기)을 비교하는데 관심이 있다. Gregory Chow에 의해 제안된 Chow 검정은 회귀모형들을 비교하고 선형회귀모형 안에 구조적 브레이크가 존재하는지를 검정하기 위해 보통 사용되는 방법들 중의 하나이다. 본 연구에서는 두 독립 선형회귀모형들의 등가성을 검정하기 위해 퍼뮤테이션 방법을 제안하고 Chow 검정과 비교한다. 그리고 퍼뮤테이션 검정과 Chow 검정의 검정력을 조사하기 위해 시물레이션 연구를 진행하였다.

• 대한치과교정학회지
• /
• 제44권2호
• /
• pp.69-76
• /
• 2014

Objective: This study aimed to evaluate the accuracy and precision of polyurethane (PUT) dental arch models fabricated using a three-dimensional (3D) subtractive rapid prototyping (RP) method with an intraoral scanning technique by comparing linear measurements obtained from PUT models and conventional plaster models. Methods: Ten plaster models were duplicated using a selected standard master model and conventional impression, and 10 PUT models were duplicated using the 3D subtractive RP technique with an oral scanner. Six linear measurements were evaluated in terms of x, y, and z-axes using a non-contact white light scanner. Accuracy was assessed using mean differences between two measurements, and precision was examined using four quantitative methods and the Bland-Altman graphical method. Repeatability was evaluated in terms of intra-examiner variability, and reproducibility was assessed in terms of interexaminer and inter-method variability. Results: The mean difference between plaster models and PUT models ranged from 0.07 mm to 0.33 mm. Relative measurement errors ranged from 2.2% to 7.6% and intraclass correlation coefficients ranged from 0.93 to 0.96, when comparing plaster models and PUT models. The Bland-Altman plot showed good agreement. Conclusions: The accuracy and precision of PUT dental models for evaluating the performance of oral scanner and subtractive RP technology was acceptable. Because of the recent improvements in block material and computerized numeric control milling machines, the subtractive RP method may be a good choice for dental arch models.

• 한국실내디자인학회논문집
• /
• 제34호
• /
• pp.149-156
• /
• 2002

This study intends to acquire objective models for basic quantitative analysis of pattern and space through image-recognition technique, and verify the effectiveness of such acquired models. Many experiments showed that the recognized result can be varied depending on the different viewpoints and the analysis based on the single-viewpoint images does not provide objectivity. The experiment using multi-viewpoint image models, which was attempted as an alternative for the disadvantages, showed the recognition similar to that of the actual model. Especially, images generated at laboratory using miniature model may be useful in comparing and understanding plural number of patterns. The models that have been acquired using such images may be hard to use in acquiring images for analyzing actual building patterns or indoor space, although they may be useful in pattern analysis using miniature model. The disadvantage, however, can be supplemented with panorama VR and C. G. simulation technique. Steady researches are required on the application of visual information to the image recognition principle and the model for quantitative analysis of pattern and space in addition to the research on the construction of the model that can be used in comparing and analyzing not only form and space but also miniature models.

• Wind and Structures
• /
• 제25권6호
• /
• pp.537-549
• /
• 2017

In this study, the turbulent flow around a bluff body for different wind velocities was investigated numerically by using its two- and three-dimensional models. These models were tested to verify the validity of the simulation by being compared with experimental results which were taken from the literature. Variations of non-dimensional velocities in different positions according to the bluff body height were analysed and illustrated graphically. When the velocity distributions were examined, it was seen that the results of both two- and three-dimensional models agree with the experimental data. It was also seen that the velocities obtained from two-dimensional model matched up with the experimental data from the ground to the top of the bluff body. Particularly, compared to the front part of the bluff body, results of the upper and back part of the bluff body are better. Moreover, after comparing the results from calculations by using different models with experimental data, the effect of multidimensional models on the obtained results have been analysed for different inlet velocities. The calculation results from the two-dimensional (2D) model are in satisfactory agreement with the calculation results of the three-dimensional model (3D) for various flow situations when comparing with the experimental data from the literature even though the 3D model gives better solutions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.124-127
• /
• 2002

Ceil embolisation technique has been used to treat the intracranial aneurysms. Microcoils inserted into the aneurysm sac induce the blood flow stagnation inside the aneurysm sac, which causes the thrombus formation and embolisation of aneurysm. Since the intraaneurysmal flow patterns affect the embolisation process, we want to measure the flow field for different locations of coil inside the aneurysm sac . Lateral aneurysm models are manufactured using rapid prototyping, and the velocity fields are measured using particle image velocitimeter. Distally blocked models showed less flow into the aneurysm sac comparing to proximally blocked models. Also blocking the neck of aneurysm showed better inflow blocking comparing to blocking the dome of aneurysm. These results suggest that distal neck should be the preferred locations of coil for aneurysm embolisation.