• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.388-391
• /
• 2008

A new reset waveform with negative ramp pulse was proposed. Comparative experiments between the negative and positive waveforms were performed. During reset period, IR distributions and luminance of black and white conditions were measured with the 42-inch XGA PDP module. The negative waveform improved contrast ratio about 15.4 ~ 22.5 % than the positive waveform by lowing the black luminance in reset period. Z bias (= Vbb) of the positive waveform was 27 V higher than the negative waveform.

• 한국임상수의학회지
• /
• 제14권2호
• /
• pp.172-176
• /
• 1997

This study was carried out to investigate the anti-fungal effect of Pyrethri Flos Boiled Solution (PFBS) from Chrysanthemum Cinerariaefolium Visiani on Microsporum canis, Microsporum gypseum and Trichophyton Mentagrophytes with 0.5 ml, 1ml, 2 ml. In comparative drugs, on Sabouraud's glucose agar medium to 2 ml respectively and PFBS on the rabbit skin lesions, in vivo experiments, were observed. The results obtained were as follows : PFBS slightly suppresed the growth of the fungi in 0.5 ml and markedly it in 1 ml and 2 ml. In comparative drugs, benzylbenzoate represented similar anti-fungal action in 2 ml compared with PFBS. While, salicylic acid and boric acid represented less suppression of growth of the fungi than PFBS in 0.5 ml. The effects of PFBS on the rabbit skin lesions inoculation with dermatophytes was almost normally recorved about Microsporum gypseum, Trichophyton mentagrophytes except Microsporum canis after 8 days.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1390-1393
• /
• 2002

Comparative analysis of driving inverters for piezo-electric transformer (PT) is performed and the suit- able drive circuit for portable devices such as personal digital assistants (PDA) is chosen with the experiment in this paper. As a result, a single-switch inverter with a small two winding reactor is chosen, and then the advantages of this method are clarified. It is also confirmed that the driving inverter with this method enables to realize a stabilized AC 400v output and 82% power efficiency from DC 3V input under the conditions of the variations of load current or input voltage from the experiments. Piezo-electric Transformer, Back-Light System, Single-Switch Driving Circuits, Control Method

• 반도체디스플레이기술학회지
• /
• 제12권3호
• /
• pp.59-64
• /
• 2013

Accurate and robust image registration is important task in many applications such as image retrieval and computer vision. To perform the image registration, essential required steps are needed in the process: feature detection, extraction, matching, and reconstruction of image. In the process of these function, feature extraction not only plays a key role, but also have a big effect on its performance. There are two representative algorithms for extracting image features, which are scale invariant feature transform (SIFT) and speeded up robust feature (SURF). In this paper, we present and evaluate two methods, focusing on comparative analysis of the performance. Experiments for accurate and robust feature detection are shown on various environments such like scale changes, rotation and affine transformation. Experimental trials revealed that SURF algorithm exhibited a significant result in both extracting feature points and matching time, compared to SIFT method.

• 반도체디스플레이기술학회지
• /
• 제15권1호
• /
• pp.47-51
• /
• 2016

Human visual system infers 3D vision through stereo disparity in the stereoscopic images, and stereo visioning are recently being used in consumer electronics which has resulted in much research in the application field. Basically, stereo vision system consists of four processes, which are cost computation, cost aggregation, disparity calculation, and disparity refinement. In this paper, we present and evaluate the existing various methods, focusing on cost aggregation for stereo vision system to comparatively analyze the performance of their algorithms for a given set of resources. Experiments show that Normalized Cross Correlation and Zero-Mean Normalized Cross Correlation provide higher accuracy, however they are computationally heavy for embedded system in the real time systems. Sum of Absolute Difference and Sum of Squared Difference are more suitable selection for embedded system, but they should be required on improvement to apply to the real world system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권11호
• /
• pp.2903-2923
• /
• 2023

Knowledge recommendation is a type of recommendation system that recommends knowledge content to users in order to satisfy their needs. Although using graph neural networks to extract data features is an effective method for solving the recommendation problem, there is information loss when modeling real-world problems because an edge in a graph structure can only be associated with two nodes. Because one super-edge in the hypergraph structure can be connected with several nodes and the effectiveness of knowledge graph for knowledge expression, a dual-channel hypergraph convolutional neural network model (DCHC) based on hypergraph structure and knowledge graph is proposed. The model divides user data and knowledge data into user subhypergraph and knowledge subhypergraph, respectively, and extracts user data features by dual-channel hypergraph convolution and knowledge data features by combining with knowledge graph technology, and finally generates recommendation results based on the obtained user embedding and knowledge embedding. The performance of DCHC model is higher than the comparative model under AUC and F1 evaluation indicators, comparative experiments with the baseline also demonstrate the validity of DCHC model.

• 한국항해항만학회지
• /
• 제36권8호
• /
• pp.625-630
• /
• 2012

위성항법중앙사무소는 다수의 DGNSS 기준국을 운영하고 있으며 이 중 일부 기준국은 타 기준국에 비해 TEQC 품질평가 결과가 저조하다. 이에 이 연구에서는 GPS 관측자료의 품질향상을 위해 품질을 저하시키는 요인을 찾아 규명하고자 한다. 비교실험 대상은 TEQC 품질평가가 상대적으로 저조한 충주기준국을 대상으로 진행하였다. 현장조사를 통해 GPS 신호를 차단 또는 방해하는 장애물은 존재하지 않는 것으로 확인되었다. 비교실험은 주변의 환경적 요인을 고려한 동시관측 비교실험과 관측장비의 이상요인을 고려한 장비교체 비교실험으로 진행하였다. 동시관측 비교실험 결과에서는 실험용 관측기기에서 양질의 데이터가 기록되어 충주기준국 주변의 환경적인 부분은 품질저하의 주된 요인이 아님을 확인하였다. 기준국의 주요 관측장비를 하나씩 교체하며 진행한 장비교체 비교실험에서는 실험용 수신기에 기록된 데이터의 품질이 가장 양호함을 확인하였다. 상위 2가지 비교실험을 통해 수신기의 이상이 GPS 관측자료의 품질을 저하시키는 주된 요인임을 확인하였다.

• 산업기술연구
• /
• 제27권A호
• /
• pp.85-94
• /
• 2007

This study, regarding curved channel, was performed to compare and analyze hydraulic characteristics and the speed of water and water level for left bank and right bank through hydraulic model experiments and numerical analysis. Real channels that had characteristics of curved channel were selected as objectives. In order to easily operate one and two dimensional numerical analysis and comparison for total 2.4Km model channel, measuring point was set up as 200m. HEC-RAS model was applied as one dimensional numerical analysis program and SMS model was used as two dimensional numerical analysis program. In respect of speed of water, the average speed of water for right bank recorded 8.33m/s in a model experiment and 3.08m/s, 8.57m/s were average speed of water for right bank in one dimensional and two dimensional numerical analysis. The average speed of water of two dimensional numerical analysis was quite similar to that of model experiments. Also, as for water level, maximum observational errors between one and two dimensional numerical analysis for right and left bank of model experiments were 0.66m, 0.84m and 0.28m, 0.48m for each. It was found that two dimensional numerical analysis had a similar result to hydraulic model experiments. Accordingly, from the result of this study, two dimensional numerical analysis should be used rather than one dimensional numerical analysis, when numerical analysis for curved channel is conducted.

• Structural Engineering and Mechanics
• /
• 제32권4호
• /
• pp.489-500
• /
• 2009

The aim of this paper is to compare wavelet, kurtosis and pseudofractal based techniques for structural health monitoring in the presence of measurement noise. A detailed comparison and assessment of these techniques have been carried out in this paper through numerical experiments for the calibration of damage extent of a simply supported beam with an open crack serving as an illustrative example. The numerical experiments are deemed critical due to limited amount of experimental data available in the field of singularity based detection of damage. A continuous detectibility map has been proposed for comparing various techniques qualitatively. Efficiency surfaces have been constructed for wavelet, kurtosis and pseudofractal based calibration of damage extent as a function of damage location and measurement noise level. Levels of noise have been identified for each technique where a sudden drop of calibration efficiency is observed marking the onset of damage masking regime by measurement noise.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.296-303
• /
• 2004

In this study, equivalent linear damping and stiffness of a single-degree-of-freedom (SDOF) structure with a rotational friction damper are estimated using the result of experiments and compared with those obtained from non-linear time history analyses. First, the transfer function of the test model is constructed and then the equivalent stiffness and damping are calculated, using the half-power bandwidth (HPB) method. For comparative study, those properties are estimated based on stochastic theory in the time domain. Both equivalent linear systems identified from experiments and numerical analyses correspond well. Further, it is observed that there exists an optimal clamping force on the rotational friction damper from estimated equivalent damping.