• 한국지반공학회논문집
• /
• 제36권12호
• /
• pp.107-116
• /
• 2020

압밀 그라우팅 공법은 액상화 취약 느슨한 사질토 지반의 보강에 널리 사용되고 있다. 특히 기존에 상부 구조물이 있는 지반의 경우, 압밀 그라우팅 수직 주입이 불가능하여, 수평 주입이 대안으로 제시되고 있는 상황이다. 현재 대부분 이론과 실험은 압밀 그라우팅의 수직 주입 공법을 다루고 있는 반면, 수평 압밀 그라우팅 공법에 대한 연구는 매우 부족하다. 본 연구에서는 수평 압밀 그라우팅 공법에 대한 실내 2차원 실험을 통해 상부 구조물이나 주입 심도를 대변하는 상부 응력에 따른 그라우트 구근 형상과 팽창 방향을 분석하였다. 그 결과 그라우트 구근의 단면은 응력 이방성과 느슨함의 정도에 따라 주로 타원형으로 팽창함을 발견하였다. 특히, 낮은 상부 응력과 낮은 상대 밀도의 조건에 수평축이 긴 타원형으로 수평 방향으로 발달하였고, 상부 응력과 상대 밀도가 증가함에 따라 그 형상이 원형에 가까워지고 수직 방향으로 팽창하였다. 본 연구를 통해 수평 압밀 그라우팅 공법의 구근 팽창에 대한 이해가 높아지고 나아가 보다 정확하고 효율적인 현장 시공 설계가 가능할 것으로 기대된다.

• Geomechanics and Engineering
• /
• 제35권6호
• /
• pp.593-601
• /
• 2023

In this paper, an analytical solution of large-strain cylindrical cavity expansion in compaction grouting problem under temperature field is given. Considering the stress increment caused by temperature, the analytical solution of cavity expansion under traditional isothermal conditions is improved by substituting the temperature stress increment into the cavity expansion analysis. Subsequently, combined with the first law of thermodynamics, the energy theory is also introduced into the cylindrical cavity expansion analysis, and the energy dissipation solution of cylindrical cavity expansion is derived. Finally, the validity and reliability of solution are proved by comparing the results of expansion pressure with those in published literatures. The results show that the dimensionless expansion pressure increases with the increase of temperature, and the thermal response increases with the increase of dilation angle. The higher the exothermic temperature of grouting slurry, the greater the plastic deformation energy of the surrounding soil, that is, the greater the influence on the surrounding soil deformation and the surrounding environment. The proposed solution not only enrich the theoretical system of cavity expansion, but also can be used as a theoretical tool for energy geotechnical engineering problems, such as CPT, nuclear waste disposal, energy pile and chemical grouting, etc.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.71-76
• /
• 2000

In generally, grouting consists of injecting a suspension or solution into the voids of soils. The low slump mortar grout has been used in America since 1950's. The Compaction Grouting, the injection of a very stiff under relatively high pressure, form a cylinderical grout support pile. The grout generally does not enter soil pores but remains in homogeneous mass that gives controlled displacement either to compact loose soils, or for lifting of structures, or both. In this paper, on the case of the reinforcement construction of 00 plant that the foundation's bearing capacity is insufficient and is to reinforce the foundation, a study has been peformed to analyze the effectiveness of the ground improvement. The bearing capacity of the Compaction Pile has been verified by the S.P.T and the settlement of the improved ground has been monitored rising the magnetic extensometer.

• 대한토목학회논문집
• /
• 제39권6호
• /
• pp.779-788
• /
• 2019

컴팩션 그라우팅 공법, 일명 CGS (Compaction Grouting System) 공법은 저유동성 그라우트재의 주입을 통해 주변 지반을 압밀·다짐하여 원지반의 물성 향상은 물론 지중 그라우트 구근체의 형성을 통해 복합지반 거동을 기대함으로써 지반을 개량하는 공법이다. 그러나 기존 컴팩션 그라우팅 공법에 사용되는 펌프는 한 번에 여러 공을 동시에 주입하기 어려워 시공 물량이 많아 신속함이 요구되는 공사 시에 시공 효율성 확보가 어려웠다. 따라서 본 논문에서는 3공까지 동시주입이 가능한 다중 동시주입 컴팩션 그라우팅 공법을 개발하여 현장시험을 통해 지반 보강효과의 적용성을 평가하였다. 현장시험은 점성토 연약지반에 단일공과 3공 삼각 배열로 각각 시험시공하고 그라우팅 주입 전·후 표준관입시험(SPT)을 수행하여 그 결과를 비교·분석하였다. 최종적으로 점성토 연약지반에서 다중 동시주입 컴팩션 그라우팅 공법의 적용 시, 요구되는 적정 동시주입 이격거리와 충분한 지반 안정화 시간 확보의 중요성에 대해 제언하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.621-628
• /
• 2002

Compaction Grouting Pack (CGP) Anchor which is composite anchor of bearing plus friction-type was chosen and executed for the open-cuts in soft ground. This paper presents an analysis of data from tests on composite-anchor by jacking force. The properties of composite-anchor was presented to be as follows , the maximum plastic displacement was 60 mm in abandoned coal fill deposit, the shear stress($\tau$) is expressed as $\tau$ = (equation omitted) kg/$\textrm{cm}^2$ in clayey silt.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.425-432
• /
• 2001

Compaction Grouting System, the method which makes ground compact by injection of low slump mortar, Is widely used for reinforcement of soft ground, restoration of structures happened differential settlement, underpinning and restoration of damaged dam core. The quantitive analysis of ground improvement for this method has not performed yet. So, design parameters about thls method must be studied through performance of CGS in various types of soil to make CGS adaptable widely. In this study PBT, SPT and field density test were performed for analysis of the characteristics of ground improvement and pressuremeter and inclinometer were installed for analysis of the characteristics of compaction in adjacent ground. In this paper, denoted much effects for filled ground that increasing of the bearing capacity, confirming the displacement of adjacent ground and the effective radius of injection.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.1364-1368
• /
• 2006

By the countermeasure which is caused by with railroad station ground settlement it applied a CGS in each independent foundation. The effectiveness of the ground improvement and the bearing capacity of the compaction pile has been verified by the Cone Penetration Test(CPT) and Load Test. Test result show that penetration resistance and the cone friction force increased a lot and settlement 13.475mm as the standard settlement 40.0mm appeared at below. Also uniaxial compression test result $278kg/cm^2$ as the standard $150kg/cm^2$ appeared far a lot.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.105-112
• /
• 2001

The purpose of this study is to assess the stability of tunnel for a high speed railway crossing the fault zone. The area where the tunnel crossed the fault zone can be unstable during construction and operation. Geotechnical investigations have been conducted to determine an optimum excavation method by obtaining the material properties around the fault zone and to check the stability of the tunnel. For the numerical analysis, the FLAC, numerical analysis code based on finite difference method, was utilized to analyze the behavior of the fault at three points having typical ground conditions. Based on the results of numerical analysis, the combinations of compaction grouting and LW grouting were determined as suitable methods for pre-excavation Improvement of the ground surrounding the tunnel opening. In conclusion, the stability of the tunnel construction for the high speed railway within the fault zone may be obtained by adopting the optimum excavation method and the reinforcement method. The numerical analysis based on FLAC program contains errors caused by assumptions used in numerical analysis, therefore constant monitoring with respect to the change of ground condition and groundwater is highly recommended to minimize the numerical error and the possibility of damage to tunnel.

• 지반과기술
• /
• 제2권2호
• /
• pp.54-58
• /
• 2005

• 지반과기술
• /
• 제2권1호
• /
• pp.51-58
• /
• 2005