• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.3
• /
• pp.107-116
• /
• 2005

The paper addresses modeling and analysis of a grid-connected photovoltaic generation system (PV system). PSCAD/EMTDC, an industry standard simulation tool for studying the transient behavior of electric power system and apparatus, is used to conduct all aspects of model implementation and to carry out extensive simulation study. This paper is aimed at sharing with the PSCAD/EMTDC user community our user-defined model for PV system applications, which is not yet available as a standard model within PSCAD/EMTDC. An equivalent circuit model of a solar cell has been used for modeling solar array. A series of parameters required for array modeling have been estimated from general specification data of a solar module. A PWM voltage source inverter (VSI) and its current control scheme have been implemented. A maximum power point tracking (MPPT) technique is employed for drawing the maximum available energy from the PV array. Comprehensive simulation results are presented to examine PV array behaviors and PV system control performance in response to irradiation changes. In addition, dynamic responses of PV array and system to network fault conditions are simulated and analysed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.04a
• /
• pp.88-96
• /
• 1995

Seismic design provisions in Korea has developed based on seismic provisions in United States (e.g., ATC 3-06). Current seismic design provisions in U .S. is moving toward adopting enhanced concept for design. Federal Emergence Management Agency (FEMA) Provides the NEHRP recommended Provisions for the Development of Seismic Regulations for New Buildings which can be used as a source document for use by any interested members of the building community. Current seismic design provisions in U .S. generally use a uni-level force. These provisions can not be satisfied if the limit state design is concerned. Limit state can be defined as a state causing undesirable performance o( a structure (e .g., serviceability, ultimate, buckling, etc.). Even if there are provision for controlling drift by two levels, it is still difficult to satisfy limit states using uni-level force. Architectural Institute of Japan (AIJ) uses a hi-level forces Int seismic loadings which can satisfy serviceability and ultimate limit state. However, the seismic parameters used in AIJ guideline are basically determined by subjective manner of code committee member and professions. These parameters need to be determined based on target quantities (target reliability, target energy dissipation, target displacement, target stress level, etc.). This study develops the method to determine the sesmic design parameters based on a certain taget level. Reliability is used as a target level and load factors in ANSI/ASCE 7-88 are selected as design parameters to be determined.

• Journal of Environmental Science International
• /
• v.27 no.10
• /
• pp.831-844
• /
• 2018

Riverbank Filtration (RBF) is a kind of indirect artificial recharge method and is useful in obtaining higher-quality source water than surface water when procuring municipal water. This study evaluated optimal riverbank filtered water and the productivity of the radial collector wells on Ttansum Island in the area downstream of the Nakdong River, where Gimhae City is constructing a municipal water plant for the purpose of acquiring high-quality water. The RBF wells are planned to provide water to the citizens of Gimhae City through municipal water works. Groundwater flow modeling was performed with the following four scenarios: (a) 9 radial collector wells, (b) 10 radial collector wells, (c) 10 radial collector wells and two additional vertical wells, and (d) 12 radial collector wells. This study can be useful in determineing the optimum production rate of bank filtrated water not only in this study area but also in other places in Korea.

• Journal of the Korean housing association
• /
• v.16 no.1
• /
• pp.47-54
• /
• 2005

The purpose of this study was to examine the factors of environmental friendliness perceived among residents, and to provide housing designers and housing policy makers with the relevant information. Literature review and questionnaire survey were used in this research. Data drawn from 320 residents living in the Bundang area were analyzed. Data were analyzed with the SPSS PC+ 11.0 window version. The results were summarized as follows: 1) Residents were satisfied with the amenity of their residential environment but they were unsatisfied with other ecosystem among environment friendly factors. And they pointed out that three factors are very important factors among environmental friendliness, which are the environmental friendliness apartment community plan, the minimization of environmental pollution, the energy saving. 2) There was significant difference the evaluation of environmental friendly factors according to sex, age, educational level of wife, and income. Especially, women are unsatisfied with environmental friendliness of their residential environment and it was founded that the older the age, the more positive evaluation on their residential environment. 3) There was significant difference in the evaluation of environmental friendly factors according to location, housing type, homeownership, and residential period. Location was related to the amenity of their residential environment, housing type, homeownership, and residential period were related to the convenience of their residential environment.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.482-486
• /
• 2005

Total forest growing stock and growing stock per ha in Korea are $470\times10^6m^3\;and\;73m^3$, respectively. Those figures mean that forest growing stock was increased 4.7 times more during last 30 years. The annual production of forest biomass comes from forest tending executed by Korea Forest Service was estimated about $1.07\times10^6m^3$ M/T, which was equivalent to $0.45\%$ of total imported crude oil of Korea at 2002. The production is expected to increase and reach up to $1.9\times10^6 M/T$ till 2008. The analysis of economic feasibility showed that the production cost of wood chip(134,786Won/T) was about 30,389 Won/T higher than heat value of wood chip, 104,397 Won/T estimated from that of kerosene. For the promotion of forest bioenergy utilization, more efforts need to be given for the education and public relations to induce publicity a willingness-to-pay for the environment friendly fuels under the good understanding for the use of bioenergy. In addition, we need to provide a community-based biomass utilization program by region to allocate the role of each participant and to increase the profitability of bioenergy.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.444-449
• /
• 2005

In Seoul, several railway depots are located at the places where a public can easily access. Since a depot occupy a large amount of land itself, it is natural to use those sites for a public building construction such as an apartment complex or a transportation terminal, as an example. Most of the buildings on a depot, however, are exposed to vibration problems, because foundations are excited from the dynamic loading whenever heavy trains pass on the track. Severe vibration may cause a damage to building structures and a troublesome to a community. In this paper, some vibration practices have been examined in order to resolve the vibration problems. First, a critical speed of a train in a railway depot is evaluated. Then, a structural effect on the transmission of a vibration energy has been investigated. Finally, practical approaches to reduce the vibration level have been proposed. In this first half part of the paper, the focus has been on the critical speed and a structural transmission phenomena.

• Korean Institute of Interior Design Journal
• /
• v.25 no.6
• /
• pp.79-88
• /
• 2016

The purpose of this study was to suggest ways to vitalize residential container architecture by identifying the building process of domestic residential container architecture and analyzing various problems appeared in the process and status of construction related to planning, design, and construction. Conclusion and suggestions of this study are as follows.; firstly, according to the current situation of domestic residential container architecture, the usage was planned mainly for accommodation. Secondly, For planning background of planning preparation stage, economic benefit for long-term residence individuality and diversity for long short term complex residence were the primary planning backgrounds. Thirdly, for floor planning of planning design stage, space planning for various purposes is necessary as creating inter-space, wide LDK space, and loft by using narrow and long container for the long-term residence. Lastly, For construction stage, ways to reduce personnel expenses are being required by reducing the term of works and simplifying the processing stage by running factory production and field construction in parallel. If reduction method of construction cost through energy saving and mass production system is considered in the future, it would be possible to expand the development to dormitory and community housing for university students who are pressured by housing cost.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.6
• /
• pp.723-734
• /
• 2010

With a belief of high water quality production and less chemical usage, membrane technology including Microfiltration (MF), Ultrafiltration (UF), and Nanofiltration(NF) is being employed more and more in drinking water treatment process. However, due to higher energy consumption of UF and NF, MF is normally used for drinking water treatment especially in a plant of large scale. In this investigation, performance ofsand filtration and membrane filtration was compared regarding removal of various water quality parameters, such as TOC, DOC, KMnO4 consumption, THMFP, and HAAFP. Two lines of pilot plant have been operated, one of which line is a traditional advanced water treatment process which includes sedimentation, sand filtration, ozonation, and activated carbon, and the other line is an alternative treatment process which includes sedimentation with inclined plate, MF membrane, ozonation, and activated carbon. For the first about 4months of period, MF filtration showed similar or little bit higher performance than sand filtration. However, after about 4month later, sand filtration showed much higher performance in removing all parameters monitored in the investigation. It was found that sand filtration is a better option than MF filtration as far as microbial community is fully activated in sand filter bed.

• Clinical and Experimental Pediatrics
• /
• v.52 no.12
• /
• pp.1321-1326
• /
• 2009

Prevalence of obesity in Korean children and adolescents has dramatically increased since the last 10-20 years. It is important to initiate prevention efforts early in childhood because prevalence of obesity in adolescence is the strongest predictor of its prevalence in adulthood. Intrauterine life, infancy, and preschool years may comprise the critical periods that are essential for the long-term regulation of energy balance therefore, obesity-prevention strategies should be initiated in utero and continued throughout childhood and adolescence. Families with high-risk children should be provided early education about maintaining normal weight. Encouraging physical activity and, especially, avoiding inactivity, are key challenges in the prevention of future obesity. Schools should be primarily involved in educating parents to discourage their children from excessively watching TV or playing computer games and eating unhealthy snacks and food. The involvement of medical practitioners is also important, especially, in the case of obese parents, obesity prevention strategies should be promoted from the first visit of pregnant women to the physicians. Health professionals can also be involved in obesity prevention because they are ideally equipped to identify young children at risk of obesity. Community and nation-wide efforts to increase awareness and promote environments that encourage physical activity and healthy nutrition are required.

• Microbiology and Biotechnology Letters
• /
• v.47 no.4
• /
• pp.585-595
• /
• 2019

Analysis of bacterial communities based on their 16S rDNA sequences revealed the predominance of Proteobacteria (Aeromonas sp., Acinetobacter sp. and Thaueraamino aromatica sp.) and uncultured bacterium in activated sludge from the effluent treatment plant (ETP) of Mother Dairy, Calcutta (India). Each isolate was used for bioremediation of dairy wastewater with simultaneous conversion of nitrogenous pollutants into ammonia. A consortium developed using seven of these isolates and three Bacillus strains from different environmental origins could reduce 93% nitrate with simultaneous production of ammonia (626 ㎍/100 ml) within 20 h in non-aerated, immobilized conditions as compared to 82% nitrate reduction producing 2.4 ㎍/100 ml ammonia in 96 h with extensive aeration in a conventional ETP. The treated ammonia-rich effluent could be used instead of freshwater and fertilizer during cultivation of mung bean with 1.6-fold increase in grain yield. The ETP with the surrounding agricultural land makes this process a zero liquid discharge technology for using the biofertilizer generated. In addition, the process requires minimal energy supporting sustained environmental health. This method is thus proposed as an alternative approach for small-scale dairy ETPs.