• International journal of advanced smart convergence
• /
• v.7 no.1
• /
• pp.48-63
• /
• 2018

The combination of Simian Virus40 (SV40)'s large T antigen with its replication origin is commonly used in molecular studies to enhance the expression of heterogeneous genes through multiplying the plasmid copy number. There are no reports related to the impact of the SV40 T antigen on plant, multiple fissional, cell-type. This study explores the response of two multiple-fission microalgal cells, Scenedesmus quadricauda and Chlorella vulgaris, to the expression of the T-antigen, with aim of applying SV40 T-antigen to increase the expression efficiency of foreign genes in the two species. Different levels of low-expression have been constructed to control the expression of SV40 T antigen using three heterogenous promoters (NOS, CaMV35S, and CMV). Chlorella cultures showed slowdown in the growth rate for samples harboring the T antigen under the control of CaMV35S and CMV promoters, unlike Scenedesmus cultures which showed no significant difference between samples and could have silenced the expression.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.698-703
• /
• 2016

We report a new all-optical flip-flop (AOFF) with a quite simple structure, using optical beating in an injection-locked Fabry-Perot laser diode (FP-LD) with optical bistability. While conventional AOFF methods using an injection-locked FP-LD require additional devices such as secondary FP-LDs or polarization controllers for reset operation, the proposed method can be implemented using only a single commercially available FP-LD with set and reset signals. The optical beating induces intensity fluctuations inside the FP-LD, and releases the locking state to the reset state. Even though we demonstrated the AOFF at 100 Mbit/s, we expect that its operation rate could extend to 10 Gbit/s, according to the limit of the FP-LD's frequency response.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.64
• /
• pp.1-20
• /
• 2001

In distributed databases, file replication and workload allocation are important design issues. This paper solves these two issues simultaneously, The primary objective is to minimize the system response time that consists of local processing and communication overhead on a local area network. Workload (query transactions) is assigned among any sites in proportion to the remaining file request service rate of the each server The problem is presented in the form of a nonlinear integer programming model. The problem is proved to be NP-complete and thus an efficient heuristic is developed by employing its special structure. To illustrate its effectiveness, it is shown that the proposed heuristic is based on the heuristic of a non-redundant allocation that was provided to be effective. The model and heuristics are likely to provide more effective distributed database designs.

• Journal of Information Processing Systems
• /
• v.13 no.6
• /
• pp.1487-1495
• /
• 2017

With increasing interests in renewables, more consumers are installing an energy storage system (ESS) in their backyards, and thus, the ESS will play a critical role in the emerging smart grid. Due to mechanical properties, however its operational dynamics must be well understood before connecting the ESS to the smart grid (and eventually to an IT system). To this end, we investigate charging and discharging processes in detail. This paper, then, proposes methods for four type tests (state of charge test, conversion efficiency test, response time test, and ramp rate test) that can assess the dynamics of the ESS. The proposed methods can capture accurate delay values of mechanical processes in the ESS, and it is expected for those values to help design real-time communication systems in the smart grid involving the ESS.

• Journal of Acupuncture Research
• /
• v.36 no.1
• /
• pp.21-27
• /
• 2019

Background: The intelligent tissue hypothesis holds that an organ's states (be it normal function or stressed states) are reflected in real time at its related acupuncture points (acupoints), causing physical, real-time changes in the local tissue. The experiment was devised to test this. Methods: The patient drank chilled water while the impedance at 6 stomach-related acupoints was monitored in real time (sample rate of 1 kHz). Any changes in the local tissue at the acupoints ought to be reflected in changes in the impedance. Results: The impedance at every test acupoint showed a response to the chilled water being ingested. Also, the duodenal pacesetter and the stomach's slow waves were clearly visible in the impedance pattern at all the acupoints. Conclusion: Hence, many separate details of the stomach's function were reflected at these acupoints. The duodenal features were consistent with the traditional indications for these acupoints, which are noted to be able to treat intestinal conditions. Therefore, the results were consistent with the hypothesis and also provided a possible explanation for how the use of these acupoints is able to treat intestinal conditions.

• ETRI Journal
• /
• v.43 no.5
• /
• pp.923-931
• /
• 2021

We studied the influence of GaAs top-layer thickness on the small-signal modulation response and 56 Gb/s four-level pulse-amplitude modulation eye quality of 850 nm vertical-cavity surface-emitting lasers (VCSELs). We considered the proportionality of the gain-saturation coefficient to the photon lifetime. The simulation results that employed the transfer-matrix method and laser rate equations led to the conclusion that the proportionality should be considered for proper explanation of the experimental results. From the obtained optical eyes, we could determine an optimum thickness of the GaAs top layer that rendered the best eye quality of VCSEL. We also compared two results: one result with a fixed gain-saturation coefficient and the other that considered the proportionality. The former result with the constant gain-saturation coefficient demonstrated a better eye quality and a wider optimum range of the GaAs top-layer thickness because the resultant higher damping reduced the relaxation oscillation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.1
• /
• pp.83-90
• /
• 2020

A commercial flow measurement radar sensor estimates a quantity of flowed water using surface flow rate. In this way, the amount of water flowing per unit time cannot be measured accurately because of using an estimation result and it can't response environmental changes. For more accurate flow measurements we need width of waterway, water level and distance that water moved per unit time. Commonly two sensors are used to measure water level and flow rate. In this paper, we propose a method to simultaneously measure the water level and surface flow velocity using a single FMCW radar sensor and design the transmission waveform. In order to verify the waveform design, received signal is modelled based on transmission waveform. In addition, we consider phenomenons and problems that may occur in signal processing.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.2
• /
• pp.33-40
• /
• 2008

Streaming video has become a popular form of transferring media over the wired/wireless network. TCP-friendly rate control (TFRC) is used as a streaming media transport protocol. Using the TCP congestion response function and current network conditions, TFRC adjusts its sending rate to yield the maximum TCP-friendly throughput. Since TFRC was designed for applications that would prefer to maintain a slowly-changing sending rate, it is less responsive to changes in handover between wireless heterogeneous networks such as 3G network, WLAN, and so on. This paper shows a new TFRC method for vertical handover over wireless heterogeneous network. The proposed TFRC method has features of low quality interruption and fast rate adaptation to a new target network. The simulation results show that the proposed one provides better QoS and throughput support than the traditional TFRC scheme during vertical handover.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.4
• /
• pp.93-102
• /
• 2019

As interest in wellness grows, There is a lot of research about monitoring individual health using wearable devices. Accordingly, a variety of methods have been studied to distinguish exercise from daily activities using wearable devices. Most of these existing studies are machine learning methods. However, there are problems with over-fitting on individual person's learning, data discontinuously recognition by independent segmenting and fake activity. This paper suggests a detection method for exercise activity based on the physiological response principle of heart rate up and down during exercise. This proposed method calculates activity intensity and heart rate from triaxial and photoplethysmography sensor to determine a heart rate recovery, then detects exercise by estimating activity intensity or detecting a heart rate rising state. Experimental results show that our proposed algorithm has 98.64% of averaged accuracy, 98.05% of averaged precision and 98.62% of averaged recall.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.15-23
• /
• 2016

To support the telematics and infotainment services, vehicle-to-everything (V2X) communication requires a robust and reliable network. To do this, the 3rd Generation Partnership Project (3GPP) has recently developed V2X communication. For reliable communication, accurate channel estimation should be done. However, because vehicle speed is very fast, radio channel is rapidly changed with time. Therefore, it is difficult to accurately estimate the channel. In this paper, we propose the new linear minimum mean square error (LMMSE) channel interpolation scheme based on the Long Term Evolution (LTE) sidelink system in vehicle-to-vehicle (V2V) environments. In our proposed reduced decision error (RDE) channel estimation scheme, LMMSE channel estimation is applied in the pilot symbol, and then in the data symbol, smoothing and LMMSE channel interpolation scheme is applied. After that, time and frequency domain averaging are applied to obtain the whole channel frequency response. In addition, the LMMSE equalizer of the receiver side can reduce the error propagation due to the decision error. Therefore, it is possible to detect the reliable data. Analysis and simulation results demonstrate that the proposed scheme outperforms currently conventional schemes in normalized mean square error (NMSE) and bit error rate (BER).