• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.3
• /
• pp.477-493
• /
• 2011

The IEEE 802.16 mobile multi-hop relay (MMR) task group 'j' (TGj) has introduced the multi-hop relaying concept in the IEEE 802.16 Wireless MAN, wherein a relay station (RS) is employed to improve network coverage and capacity. Several RSs can be deployed between a base station and mobile stations, and configured to form a tree-like multi-hop topology. In such architecture, we consider the problem of a path selection through which the mobile station in and outside the coverage can communicate with the base station. In this paper, we propose a new path selection algorithm that ensures more efficient distribution of resources such as bandwidth among the relaying nodes for improving the overall performance of the network. Performance of our proposed scheme is compared with the path selection algorithms based on loss rate and the shortest path algorithm. Based on the simulation results using ns-2, we show our proposal significantly improves the performance on throughput, latency and bandwidth consumption.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.1
• /
• pp.160-163
• /
• 2021

In this paper, we present a path search scheme for the safe movement of the swarm of unmanned systems in unknown dangerous areas. Some of the swarm searches for the primary and secondary paths before the majority of swarm move through dangerous areas. In terms of rapid movement from the dangerous area and preparation for an accident, the primary path is searched first in the destination's direction. The secondary path is searched by considering the distance between the paths to guarantee a safe distance. The computer simulations show that the proposed scheme is suitable for the swarm of unmanned systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.179-186
• /
• 2015

This paper proposes the target path detection algorithm using statistical characteristics of an activated time lag along a moving path of target from a neighboring sensor in PDR(Pulse Doppler Radar) sensor node environment based on USN(Ubiquitous Sensor Network) with a limitation detecting only an existence of moving target. In the proposed algorithm, detection and non-detection time lag obtained from the experimental data are used. The experimental data are through repetitive action of each 500 times about three path scenarios such as passing in between two sensors, moving parallel to two sensors, and turning through two sensors. From this experiments, error detection percentages of three path scenarios are 5.67%, 5.83%, and 7.17%, respectively. They show that the proposed algorithm can exactly detect a target path using the limited PDR sensor nodes.

• Journal of IKEEE
• /
• v.26 no.1
• /
• pp.89-94
• /
• 2022

The W-band (75-110GHz) is a band that can utilize at least 10 times more bandwidth than the existing 5G band. Therefore, it is one of the bands suitable for future mobile communication that requires high speed and low latency, such as virtual and augmented reality. However, since the wavelength is short, it has a high path loss and is very sensitive to the atmospheric environment. Therefore, in order to develop a W-band communication system in the future, it is necessary to analyze the characteristics of path loss according to the channel environment. In this paper, to analyze the characteristics of the W-band path loss, the random forest technique was used, and the influence of the channel parameters according to the distance section was analyzed through the path loss data according to various channel environment parameters. As a result of the simulation, the distance has the highest influence on the path loss in the short distance, and the other channel environment factor is almost ignored. However, as the distance section became longer, the influence of distance decreased while the impact of clutter and rainfall increased.

• International Journal of Computer Science & Network Security
• /
• v.23 no.7
• /
• pp.1-8
• /
• 2023

An Orthogonal Frequency Division Multiplexing (OFDM) based wireless communication system has drawn wide attention for its high transmission rate and high spectrum efficiency in not only radio but also Underwater Acoustic (UWA) applications. Because of the narrow sub-carrier spacing of OFDM, orthogonality between sub-carriers is easily affected by Doppler effect caused by the movement of transmitter or receiver. Previously, Doppler compensation signal processing algorithm for Desired propagation path was proposed. However, other Doppler shifts caused by delayed Undesired signal arriving from different directions cannot be perfectly compensated. Then Receiver Bit Error Rate (BER) is degraded by Inter-Carrier-Interference (ICI) caused in the case of Multi-path Doppler channel. To mitigate the ICI effect, a modified Delay and Doppler Profiler (mDDP), which estimates not only attenuation, relative delay and Doppler shift but also sampling clock shift of each multi-path component, is proposed. Based on the outputs of mDDP, an ICI canceling multi-tap equalizer is also proposed. Computer simulated performances of one-tap equalizer with the conventional Time domain linear interpolated Channel Transfer Function (CTF) estimator, multi-tap equalizer based on mDDP are compared. According to the simulation results, BER improvement has been observed. Especially, in the condition of 16QAM modulation, transmitting vessel speed of 6m/s, two-path multipath channel with direct path and ocean surface reflection path; more than one order of magnitude BER reduction has been observed at CNR=30dB.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.298-298
• /
• 2004

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.87-90
• /
• 1987

This paper gives the Sonic Range Finder(SRF) Array which detects the unknown obstacles on the mobile robot's path. This SRF Array gives mobile robot's circumstance information wider, processes and transfers them to the locomotion module to construct the modify path. In this system, 8 pairs of the 40 KHz ultrasonic sensors constitute the SRF Array, including a pair of reference sensors to correct the errors, 4051 analog multiplexer and demultiplexer swtch the sensor with time and 8031-on chip micro computer controls processes the data and communication the others.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.43-48
• /
• 2009

Wireless mesh networks, unlike Ad-hoc network, has low mobility and multi-path communication between terminals and other networks because it has the backbone structures. Most studies are advanced on finding the optimal routing path in multi-hop wireless mesh network environment. Various routing metric, minimum number of hops(Hop_count) and ETX, ETT metric, are proposed to wireless mesh networks. However, most metrics cannot identify the high throughput routing paths because this metric uses a different measurement parameters in each direction. So actual delivery rate does not provide to this metric. This paper describes the metric and implementation of IETC as a metric. This paper shows the improvement in performance.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.99-107
• /
• 2015

When new information communication technologies(ICTs) have appeared, researchers and praticitioners have explored how to spread the technologies. In e-commerce, social commerce has been introduced recently and attempts to understand social commerce have proposed diverse research models. This study proposed a hypothetical model which integrates technology readiness(TR), technology acceptance model(TAM), and theory of planned behavior(TPB). Through PLS path modeling, we found that every hypothesis except social norm-intention path alone proved significant. This result means that integrated model is useful to understand the adoption of new ICTs including social commerce. Finally, based on the findings, suggestions for future research were discussed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11b
• /
• pp.1595-1598
• /
• 2002

네트워크 장애로 인한 인터넷 서비스 품질의 저하는 사용자와 서비스 제공자에게 여러 가지 형태로 손실을 가져오므로 망의 우회경로 설정 및 복구방안은 중요한 요소가 되고 있다. 망 복구에 있어서 중요한 과제는 작업 경로(working path)에 대한 복구 경로(restoration path)를 설정하는 것이다. 장애가 발생하더라도 서비스의 중단이 없도록 하기 위해서는 복구 경로를 설정할 때 작업 경로의 대역을 보장할 수 있는 복구 경로를 실정해야 한다. 이를 위해 MPLS망에서는 명시적 Routing기법에 기반을 둔 Constraint-based routing이 제안되었고 또한 망의 경로 복구를 위해 정적 및 동적설정기법이 제안되고 있다. 본 논문에서 제안된 방식은 확장된 OSPF 프로토콜의 TE-LSAs를 이용하여 또 다른 virtual 망을 구성하고 기본경로 중간의 TE-LSR을 새로운 PIL로 설정하여 빠른 대체 LSP를 설정 및 복구하는 기법을 성능 비교를 통해 망 자원의 효율적 사용을 보고자 한다.