• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.857-860
• /
• 1999

It is made possible a removal of the preamble for carrier recovery and symbol-timing recovery by storing a burst in memory with low overhead QPSK demodulation and this demodulation method also effects frame efficiency improved by processed synchronization performance. In this paper, we have proposed that new algorithm for arc-tangent look-up table which transform the input I, Q data by phase. This I, Q data plays an important role in demodulation and makes demodulator with low-overhead by storing a burst in memory. To evaluate proposed new algorithm and symbol-timing recovery method, function simulation and timing verification have been done by using synopsys VHDL tool.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.886-890
• /
• 2013

Uplift of contact wire and dynamic characteristics between pantograph and contact wire are key interaction performance of OCS (Overhead Catenary System). These two evaluation items are the approval criteria for the performance between OCS and pantograph. A telemetry system or DAQ (Data Acquisition) System based on wireless communication make it monitor a dynamic behavior which is measured directly in a 25 kv like parts. While permissible working time is too short time to install is too long. In this paper, it is described that optimization the telemetry measurement system for OCS and increasing accuracy, easy adaptation, and faster handling can be also achieved through the study.

• International journal of advanced smart convergence
• /
• v.7 no.4
• /
• pp.197-205
• /
• 2018

Nowadays, wireless sensor networks (WSNs) have been widely adopted in structural health monitoring (SHM) systems for social overhead capital (SOC) public infrastructures. Structural health information, environmental disturbances and sudden changes of weather conditions, damage detections, and external load quantizing are among the capabilities required of SHM systems. These information requires an efficient transmission with which an efficient mobility management support for wireless networks can provide. This paper deals with the analysis of mobility management schemes in order to address the real-time requirement of data traffic delivery for critical SHM information. The host-based and network-based mobility management protocols have been identified and the advantages of network mobility (NEMO) enabled Proxy Mobile Internet Protocol version 6 (PMIPv6) have been leveraged in order to address the SHM information transmission needs. The scheme allows an efficient information transmission as it improves the handover performance due to shortened handover latency as well as reduced signaling overhead.

• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.296-311
• /
• 2007

Mobile multi-robot teams are useful in many critical applications such as search and rescue. Explicit communication among robots in such mobile multi-robot teams is useful for the coordination of such teams as well as exchanging data. Since many applications for mobile robots involve scenarios in which communication infrastructure may be damaged or unavailable, mobile robot teams frequently need to communicate with each other via ad hoc networking. In such scenarios, low-overhead and energy-efficient routing protocols for delivering messages among robots are a key requirement. Two important primitives for communication are essential for enabling a wide variety of mobile robot applications. First, unicast communication (between two robots) needs to be provided to enable coordination and data exchange. Second, in many applications, group communication is required for flexible control, organization, and management of the mobile robots. Multicast provides a bandwidth-efficient communication method between a source and a group of robots. In this paper, we first propose and evaluate two unicast routing protocols tailored for use in ad hoc networks formed by mobile multi-robot teams: Mobile robot distance vector (MRDV) and mobile robot source routing (MRSR). Both protocols exploit the unique mobility characteristics of mobile robot networks to perform efficient routing. Our simulation study show that both MRDV and MRSR incur lower overhead while operating in mobile robot networks when compared to traditional mobile ad hoc network routing protocols such as DSR and AODV. We then propose and evaluate an efficient multicast protocol mobile robot mesh multicast (MRMM) for deployment in mobile robot networks. MRMM exploits the fact that mobile robots know what velocity they are instructed to move at and for what distance in building a long lifetime sparse mesh for group communication that is more efficient. Our results show that MRMM provides an efficient group communication mechanism that can potentially be used in many mobile robot application scenarios.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1214-1221
• /
• 2006

Header compression scheme is suggested as a solution to reduce the inefficient overhead of general packet stream data. Especially, it is shown that there are more overhead rate for real-time media stream links such as voice because of its short payload size, and it is possible to get higher bandwidth efficiency using the header compression scheme. There are two kinds of error recovery in header compression such as Periodic Header Refresh(PHR) and Header Request(HR) schemes. In this paper, we analyze the performance of these two compression recovery schemes, and some results such as the overhead rate, bandwidth gain and bandwidth efficiency(BE) are presented.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.4
• /
• pp.231-238
• /
• 2017

Detecting small infrared targets from the low-SCR images at a long distance is very hard. The previous Local Contrast Method (LCM) algorithm based on the human visual system shows a superior performance of detecting small targets by a background suppression technique through local contrast measure. However, its slow processing speed due to the heavy multi-scale processing overhead is not suitable to a variety of real-time applications. This paper presents a lightweight real-time small target detection algorithm, called by the Improved Selective Local Contrast Method (ISLCM), to reduce the scale-invariant computational overhead. The proposed ISLCM applies the improved local contrast measure to the predicted selective region so that it may have a comparable detection performance as the previous LCM while guaranteeing low scale-invariant computational load by exploiting both adaptive scale estimation and small target feature feasibility. Experimental results show that the proposed algorithm can reduce its computational overhead considerably while maintaining its detection performance compared with the previous LCM.

• Journal of Broadcast Engineering
• /
• v.21 no.3
• /
• pp.436-449
• /
• 2016

This paper compares the transport overhead of MMT (MPEG Media Transport) with that of MPEG-2 TS (Transport Stream). MPEG-2 TS is globally used in multiplexing compressed audio and video data in digital broadcast industry, including areas of DTV (Digital Television), IPTV (Internet Protocol Television), and DMB (Digital Multimedia Broadcasting). It was the early 1990s when MPEG-2 TS standard was established. After more than two decades of years since its first establishment, many parts of MPEG-2 TS turned out to be inappropriate to today's broadcast and communication environment. Given the situations, in 2014 MPEG (ISO/IEC JTC 1 SC 29/WG 11) standardized MMT as the next-generation multimedia transport standard hopefully that can replace MPEG-2 TS. In this paper, with assumptions of broadcast service scenarios we applied both MMT and MPEG-2 TS to each scenario and we calculated their transport overheads. We used a software program that counts the transport overhead, which was developed in our laboratory for this paper. And we conducted a comparative analysis based on the calculated result of transport overhead.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.566-569
• /
• 2018

A power line coupler that can apply high-frequency power to a railway overhead line structure was analyzed. It is difficult to supply auxiliary power to an overhead line in a high-voltage environment, and doing so requires a long-distance transfer. A method is proposed that utilizes the resonance on the Rogowski coil, which does not use a magnetic core. A simple overhead line structure was fabricated that consisted of a contact wire, messenger wire, and dropper. Couplers of various sizes were fabricated and deployed on the messenger wire, and the transfer characteristics of the two couplers were compared at a distance. As a result of applying the matching circuit to the coupler, the transmission efficiency was 53% at a distance of 2.5 m. The proposed method shows that it is possible to apply the auxiliary power by using the existing conductor in a special structure, such as the overhead line.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.10
• /
• pp.2043-2052
• /
• 1994

This paper proposes a new parallel ASIC architecture for real-time image processing to reduce inter-processing element (inter-PE) communication overhead, called a Sliding Memory Plane (SliM) Image Processor. The Slim Image Processor consists of $3\times3$ processing elements (PEs) connected by a mesh topology. With easy scalability due to the topology. a set of SliM Image Processors can form a mesh-connected SIMD parallel architecture. called the SliM Array Processor. The idea of sliding means that all pixels are slided into all neighboring PEs without interrupting PEs and without a coprocessor or a DMA controller. Since the inter-PE communication and computation occur simultaneously. the inter-PE communication overhead, significant disadvantage of existing machines greatly diminishes. Two I/O planes provide a buffering capability and reduce the date I/O overhead. In addition, using the by-passing path provides eight-way connectivity even with four links. with these salient features. SliM shows a significant performance improvement. This paper presents architectures of a PE and the SliM Image Processor, and describes the design of an instruction set.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.1
• /
• pp.161-169
• /
• 2009

Multicast-based data communication is an efficient communication scheme in wireless networks where the Media Access Control (MAC) layer is based on one-hop broadcast from one source to multiple receivers. Compared with unicast, multicast over wireless channel should handle varying channel conditions of multiple users and user mobility to achieve good quality for all users. However, IEEE 802.11 does not support reliable multicast due to its inability to exchange RTS/CTS and ACK with multiple recipients. Thus, several MAC layer protocols have been proposed to provide reliable multicast. For the reliable multicast, an additional overhead is introduced and it degrades the system performance. In this paper, we propose a cross-layer design to reduce the control overhead for reliable multicast in OFDMA systems. We present an analytical formulation of the system throughput associated with the overhead.