• 제목/요약/키워드: communication density

검색결과 953건 처리시간 0.033초

차량 애드혹 네트워크를 위한 영역 기반 릴레이 노드 선택 알고리즘 (A Range-based Relay Node Selecting Algorithm for Vehicular Ad-hoc Network)

  • 김태환;김희철;홍원기
    • 대한전자공학회논문지TC
    • /
    • 제43권9호
    • /
    • pp.88-98
    • /
    • 2006
  • VANET은 MANET과 달리 노드의 고속 이동성, 노드 밀도, 네트워크 토폴로지의 빈번한 변화와 같은 차량 환경 고유의 특징을 가진다. 이러한 특징들은 MANET의 네트워크 토폴로지 기반 프로토콜을 VANET에 적용할 수 없는 주요 원인이 된다. 본 논문에서는 영역 기반 릴레이 노드 선택 알고리즘을 사용한 긴급경고메시지 브로드캐스팅 프로토콜을 제안하였다. 영역 기반 릴레이 노드 선택 알고리즘은 긴급 경고 메시지를 전달하는 릴레이 노드가 통신 영역의 가장 자리에 위치하지 않더라도 최적의 전달 대기 시간을 부여함으로써 종단간 메시지 전달 지연 시간을 최소화 할 수 있다. 또한, 긴급경고메시지 브로드캐스팅을 위한 제어 메시지 교환이 필요 없기 때문에 낮은 네트워크 부하를 가진다. 제안한 알고리즘은 낮은 노드 밀도와 짧은 전송 거리의 VANET 환경에서도 종단간 메시지 전달 지연 시간을 줄여 줄 수 있다.

도공지 물성 변화와 IPA에 의한 잉크 유화가 인쇄 모틀에 미치는 영향 (The Effects of the Properties Changing of Coated Paper and Ink Emulsion of IPA on Printed Mottle)

  • 하영백;이의수;오성상;구철회;윤종태
    • 한국인쇄학회지
    • /
    • 제26권2호
    • /
    • pp.1-13
    • /
    • 2008
  • Printed mottle of coated paper is one of the most common phenomenon and the most difficult problem in offset printing. Offset printing is processed mainly processed by the attractive properties between water and oil, so all inks for off-printing must work with dampening solution(water). It may cause the emulsion on the printing nip from the printing pressure. This study aimed to investigate the effect of emulsified inks on print mottle from emulsified cyan ink by force with each different IP A contents. We measured the print mottle by densitometer and image analysis method. The emulsified inks also give effect to now properties of inks and it caused more ink transfer rate, however, it caused low density of inks. Moreover the emulsified inks were spreaded to around of dots and cause the thinning density on the non-printing area like print mottle. The results showed that the emulsified inks also cause scumming on the printing result with little mistake of adjusting dampening solution and mostly decreasing dot reproduction. So we could find out the obvious effect of emulsified inks to print mottle.

  • PDF

Enhancing Robustness of Information Hiding Through Low-Density Parity-Check Codes

  • Yi, Yu;Lee, Moon-Ho;Kim, Ji-Hyun;Hwang, Gi-Yean
    • 방송공학회논문지
    • /
    • 제8권4호
    • /
    • pp.437-451
    • /
    • 2003
  • With the rapid growth of internet technologies and wide availability of multimedia computing facilities, the enforcement of multimedia copyright protection becomes an important issue. Digital watermarking is viewed as an effective way to deter content users from illegal distributions. In recent years, digital watermarking has been intensively studied to achieve this goal. However, when the watermarked media is transmitted over the channels modeled as the additive white Gaussian noise (AWGN) channel, the watermark information is often interfered by the channel noise and produces a large number of errors. So many error-correcting codes have been applied in the digital watermarking system to protect the embedded message from the disturbance of the noise, such as BCH codes, Reef-Solomon (RS) codes and Turbo codes. Recently, low-density parity-check (LDPC) codes were demonstrated as good error correcting codes achieving near Shannon limit performance and outperforming turbo codes nth low decoding complexity. In this paper, in order to mitigate the channel conditions and improve the quality of watermark, we proposed the application of LDPC codes on implementing a fairly robust digital image watermarking system. The implemented watermarking system operates in the spectrum domain where a subset of the discrete wavelet transform (DWT) coefficients is modified by the watermark without using original image during watermark extraction. The quality of watermark is evaluated by taking Into account the trade-off between the chip-rate and the rate of LDPC codes. Many simulation results are presented in this paper, these results indicate that the quality of the watermark is improved greatly and the proposed system based on LDPC codes is very robust to attacks.

Energy-Efficiency of Distributed Antenna Systems Relying on Resource Allocation

  • Huang, Xiaoge;Zhang, Dongyu;Dai, Weipeng;Tang, She
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제13권3호
    • /
    • pp.1325-1344
    • /
    • 2019
  • Recently, to satisfy mobile users' increasing data transmission requirement, energy efficiency (EE) resource allocation in distributed antenna systems (DASs) has become a hot topic. In this paper, we aim to maximize EE in DASs subject to constraints of the minimum data rate requirement and the maximum transmission power of distributed antenna units (DAUs) with different density distributions. Virtual cell is defined as DAUs selected by the same user equipment (UE) and the size of virtual cells is dependent on the number of subcarriers and the transmission power. Specifically, the selection rule of DAUs is depended on different scenarios. We develop two scenarios based on the density of DAUs, namely, the sparse scenario and the dense scenario. In the sparse scenario, each DAU can only be selected by one UE to avoid co-channel interference. In order to make the original non-convex optimization problem tractable, we transform it into an equivalent fractional programming and solve by the following two sub-problems: optimal subcarrier allocation to find suitable DAUs; optimal power allocation for each subcarrier. Moreover, in the dense scenario, we consider UEs could access the same channel and generate co-channel interference. The optimization problem could be transformed into a convex form based on interference upper bound and fractional programming. In addition, an energy-efficient DAU selection scheme based on the large scale fading is developed to maximize EE. Finally, simulation results demonstrate the effectiveness of the proposed algorithm for both sparse and dense scenarios.

초고속 무선 광통신을 위한 송신광학계의 설계 (Design of optical transmitter system for high-speed wireless optical communication)

  • 권영훈;임천석
    • 한국광학회지
    • /
    • 제15권2호
    • /
    • pp.158-170
    • /
    • 2004
  • 유선 통신의 포화지역이나 도심에서 벗어난 인구밀도가 낮은 지역 둥에서 고속 광통신을 위해 최근 무선 광통신이 새롭게 기대되고 있다. 본 논문에서는 이러한 무선 광통신을 위한 송신 광학계를 설계하였는데, 광원으로는 수평(7$^{\circ}$)및 수직(18$^{\circ}$) 발산각이 다른 비대칭 타원형 빔을 발산하는 레이저 다이오드(중심 파장 830 nm)를 사용하였다. 제안되는 송신 광학계는 장거리 전송(500 m∼1500 m)이 가능하고, 장거리 전송 후 수신단에서 빔 직경(3 m) 및 에너지 분포가 대칭형이 되도록 설계되었다. 이를 위해 비결상 광학계인 송신 광학계의 평가법으로 에너지 전달 효율과 복사 조도 분포를 계산하였다.

CuO 및 MgO 첨가가 Mg-Zn Ferrite의 자기적 특성에 미치는 효과 (Effect of the Addition of CuO and MgO on the magnetic characteristics of Mg-ZnFerrite)

  • 이준모;최규만;권혁상;이윤식;이호진;이상훈
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.495-496
    • /
    • 2008
  • The magnetic characteristics of Mg-Zn ferrite that was fired at $1150^{\circ}C$ for 1hour and sintered at $1250^{\circ}C$ for 3hours was examined. The composition ratio of the ferrite was changed after sintering. In that case the composition ratio of ${Fe_2}{O_3}$ was increased but that of CuO was decreased. When the addition quantity of CuO was 3.8 mole%, it's shrinkage rate had maximum value. Magnetic permeability was decreased as the addition rate of CuO was increased and MgO was decreased. When the composition rate of CuO was 2.3 mol% and MgO was 10.9 mol%, the firing density had maximum value. In case that CuO was 2.8mol% and MgO was 10.4mol%, PL had minimum value.

  • PDF

WAVE Communication-based V2I Channel Modeling

  • Lee, Soo-Hwan;Kim, Jong-Chan;Lim, Ki-Taek;Cho, Hyung-Rae;Seo, Dong-Hoan
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제40권10호
    • /
    • pp.899-905
    • /
    • 2016
  • Wireless access in vehicle environment (WAVE) communication is currently being researched as core wireless communication technologies for cooperative intelligent transport systems (C-ITS). WAVE consists of both vehicle to vehicle (V2V) communication, which refers to communication between vehicles, and vehicle to infrastructure (V2I) communication, which refers to the communication between vehicles and road-side stations. V2I has a longer communication range than V2V, and its communication range and reception rate are heavily influenced by various factors such as structures on the road, the density of vehicles, and topography. Therefore, domestic environments in which there are many non-lines of sight (NLOS), such as mountains and urban areas, require optimized communication channel modeling based on research of V2I propagation characteristics. In the present study, the received signal strength indicator (RSSI) was measured on both an experience road and a test road, and the large-scale characteristics of the WAVE communication were analyzed using the data collected to assess the propagation environment of the WAVE-based V2I that is actually implemented on highways. Based on the results of this analysis, this paper proposes a WAVE communication channel model for domestic public roads by deriving the parameters of a dual-slope logarithmic distance implementing a two-ray ground-reflection model.

확률밀도함수의 축차모수추정 방법 (Recursive Parameter estimation algorithm of the Probability)

  • 한영열;박진수
    • 한국통신학회:학술대회논문집
    • /
    • 한국통신학회 1984년도 춘계학술발표회논문집
    • /
    • pp.42-45
    • /
    • 1984
  • we propose a new parameter estimation algorithm that converge with probability one and in mean square, If the mean is the function of parameter of the probability density function. This recursive algorithm is applicable also ever the parameters we estimate are multiparameter case. And the results are shown by the computer simulation.

  • PDF