• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1732-1737
• /
• 2004

This paper proposes Internet-based checking technique for machine-tools with variant CNC (Computerized Numerical Controller). According to the architecture of CNC, CNC is classified into two types such as CAC (Closed Architecture Controller) which is conventional CNC, and OAC (Open Architecture Controller) which is a recently introduced PC-based controller. CAC has a closed architecture and it is dependent on CNC vender specification. Because of this, it has been very difficult for users to implement an application programs in CNC domain. Therefore, an additionally special module is required for Internet-based application such as remote checking. In this case, web I/O embedded module can be efficiently applied for Internet-based checking. The module is directly attached to TCP/IP network for communication. In order to obtain the monitoring data of CNC machines, the I/O signals of the module are assigned to PLC (Programmable Logic Controller) input and output (I/O) signals within CNC domain. On the other hand, OAC has a PC-based open architecture and an additional module is not necessary for the connection with external site. Because of this, a simple DAU is just used for signal sensing and data acquisition without additional communication modules. For Internet-based remote checking of machine-tools with OAC, a user-defined daemon and application programs are implemented as the form of internal function within the PC-based controller. Internet communication is performed between the daemon program in CNC domain and web script programs in external server. Checking points defined in this research are classified into two categories such as structured point and operational point. The formal includes the vibration of bearing, temperature of spindle unit and another periodical management. And the latter includes oil checking, clamp locking/unlocking and machining on/off status.

• 전기전자학회논문지
• /
• 제27권4호
• /
• pp.668-678
• /
• 2023

FlexRay는 차량 내 네트워크(In-Vehicle Network)로 최대 2개의 채널로 각 채널당 최대 10Mbps 전송 속도를 가진다. FlexRay는 TDMA(Time Division Multiple Access)와 FTDMA(Flexible Time division Multiple Access) 방식을 사용하여 효율적으로 데이터를 전송하면서도 실시간 통신을 보장하기 때문에 파워트레인 등 안전성이 필수적인 차량 모듈의 실시간 전자 제어에 사용된다. 본 논문에서는 ISO 17458 표준과 FlexRay 컨소시엄 문서를 바탕으로 FlexRay의 프로토콜(Protocol), 시간 계층(Time Hierarchy), 메시지 프레임(Message Frame), 커뮤니케이션 컨트롤러(Communication Controller), 적합성 시험(Conformance Test)에 대해 자세히 설명한다.

• 대한임베디드공학회논문지
• /
• 제12권6호
• /
• pp.351-358
• /
• 2017

The most common communication interface for automotive electronic control devices is CAN (Controller Area Network). Sine CAN was first adopted to Daimler vehicles in 1991, all of automobile manufacturers use the CAN communication for in-vehicle networks. However, as the number of electronic control devices connected to the CAN network rapidly increases, the CAN protocol reaches the limit of technology. To overcome this limitation, Bosch introduced the new communication protocol, that is CAN-FD (Flexible Data-rate). In this paper, we analyze the characteristics and limitations of CAN-FD communication according to the topology under the in-vehicle wiring harness environment designed based on the existing classic CAN communication.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.179-181
• /
• 2004

This paper is proposed an adaptive fuzzy-neural network(A-FNN) controller based on the vector controlled induction motor drive system. The hybrid combination of fuzzy control and neural network will produce a powerful representation flexibility and numerical processing capability. Also, this paper is proposed speed estimation of induction motor using A closed-loop state observer. The rotor position is calculated through the stator flux position and an estimated flux value of rotation reference frame. A closed-loop state observer is implemented to compute the speed feedback signal. The results of analysis prove that the proposed control system has strong robustness to rotor parameter variation, and has good steady-state accuracy and transitory response.

• 전자공학회논문지
• /
• 제51권10호
• /
• pp.228-234
• /
• 2014

건설 중장비의 경우 유압기기 및 전장 배선 등으로 인하여 내부의 배선이 매우 복잡한 구조를 가지고 있으며, 이러한 복잡한 배선으로 인하여 장비의 생산 및 유지 보수에 많은 시간이 소요되고 있어 원가 상승 요인으로 작용한다. 본 논문에서는 건설 중장비의 전장 배선을 간소화하기 위한 고신뢰성을 갖는 PLC(Power Line Communication)-CAN(Controller Area Network) 통신 모듈을 설계하고 구현한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.177-180
• /
• 2004

This paper is proposed a fuzzy neural network controller based on the vector controlled induction motor drive system. The hybrid combination of fuzzy control and neural network will produce a powerful representation flexibility and numerical processing capability. Also, this paper is proposed estimation and control of speed of induction motor using ANN Controller. The error between the desired state variable and the actual one is back-propagated to adjust the rotor speed, so that the actual state variable will coincide with the desired one. This paper is proposed the theoretical analysis as well as the simulation results to verify the effectiveness of the new method.

• Journal of information and communication convergence engineering
• /
• 제2권3호
• /
• pp.193-197
• /
• 2004

In this paper, a combination problem of controllers which are the same type of $H_{\infty}$ controllers designed with different weighting functions. This approach can remove the difficulty in the selection of the weighting functions. As a sub-controller, the Youla type of $H_{\infty}$ controller is used. In the $H_{\infty}$ controller, Youla parameterization is used to minimize $H_{\infty}$ norm of mixed sensitivity function by using polynomial approach. Computer simulation results show the robustness improvement and the performance improvement.

• 한국인터넷방송통신학회논문지
• /
• 제9권5호
• /
• pp.39-44
• /
• 2009

본 논문에서는 블루투스 모듈을 이용한 소프트웨어로 구현 가능한 모바일 컨트롤러 컨텐츠를 제안 개발한다. 개발된 시스템의 주요한 특징은 다음과 같다. 스마트폰과 노트북과의 통신은 블루투스 통신을 이용하였다. 클라이언트와 서버 두 가지 프로그램을 제작하여 클라이언트 측에서 블루투스 통신을 요청하고 서버 측에서 응답을 허락하도록 하였다. 이전 페이지와 다음 페이지로 이동하도록 컨트롤이 가능하며, GUI 환경으로 구현하여 이용자의 편리를 도모하였다. 성능평가 결과 제안 개발된 방법은 가격, 기능 및 휴대성 등에서 상대적으로 우수한 성능을 보여주고 있다.

• 제어로봇시스템학회논문지
• /
• 제21권4호
• /
• pp.385-390
• /
• 2015

Quay cranes are considered core equipment for container terminal operation. However, unmanned operation systems have not as yet been announced due to the technological difficulties of implementation. In this paper, we developed a wireless controller to control a quay crane simulator remotely and conducted its performance test, a first step toward unmanned operation of quay cranes. The communication delay of a developed wireless controller was about 9.4ms on average while that of existing wired controllers was about 5.6ms. The same functions were implemented and tested on a smart phone where the average communication delay was 7.3ms. In addition, to apply the developed system into a real environment, we proposed a network architecture based on IEEE 802.11ac and carried out its performance evaluation. When the distance between two nodes was 50m apart, the throughputs of the TCP (Transmission Control Protocol) and UDP (User Datagram Protocol) were 57Mbps and 189Mbps, respectively. The communication delay of the control data was 9.1ms through the TCP channel. These results reveal the proper working of remote quay crane operation if we adopt the IEEE 802.11ac network.

• 한국항해항만학회지
• /
• 제44권2호
• /
• pp.136-143
• /
• 2020

Maritime autonomous surface ships (MASS) has been developed over the years. But, there are many unresolved problems. To overcome these problems, this study proposes connected ship navigation system. The system comprises a slave ship and a master ship that leads the slave ship. To implement this system, communication network, route planning algorithms, and controllers are designed. The communication network is built using the transmission control protocol/Internet protocol (TCP/IP) socket communication method to exchange data between ships. The route planning algorithms calculate the course and distance of the slave ship using the middle latitude sailing method. Nomoto model is used as the mathematical model of the slave ship maneuvering motion. Then, the autoregressive with exogenous variables (ARX) model is used to estimate the parameters of Nomoto model. Based on the above model, the automatic steering controller is designed using a proportional-derivative (PD) control. Also, the speed controller is designed for the slave ship to maintain constant distance from the master ship. Sea experiments are conducted to verify the proposed system with two remodeled boats.