• 전자공학회논문지SC
• /
• 제37권1호
• /
• pp.19-29
• /
• 2000

기존의 위성제어용 시뮬레이션 툴은 위성 모델을 강체로 보고, 비례-미분(Proportional-Differential)제어기를 사용하기 때문에, 이동하는 위성의 경우 오차한계범위를 벗어나 통신이 두절되는 현상이 발생할 수 있다. 따라서, 본 논문은 신속한 자세회복 및 안정된 진보적인 제어기의 설계를 위하여 이동하는 정지궤도 및 저궤도 위성에 대하여 위성을 강체 및 유연체 구조로 모델링하고, 통신두절시 신속한 자세 회복을 위한 최소시간 제어기 설계와 위성의 위치 제어시 발생하는 통신중단을 최소화 하기 위하여 기존의 PD제어기보다 정확하고 안정된 선형조절기를 상태공간 벡터를 사용하여 설계하였다. 시뮬레이션은 먼저 강체 모델과 유연체 모델을 비교하기 위하여, 이동하는 정지궤도 및 저궤도 위성에 대하여 PD제어기를 사용하여 시험되었으며, 자세이동시의 제어기의 응답특성을 분석하기 위하여, 지상의 명령에 의한 위성의 피치각을 변경하는 경우, 주기적으로 수행되는 남북 궤도 유지에 대하여 수행하였다. 그 결과, 강체모델에 대비하여 유연성 모델이 실제 상황에 근접한 결과를 가져다 주었으며, 최소시간제어기는 PD제어기 대비 약 7배 이상 빠르게 신속한 자세 회복을 가져다 주었으며, 선형조절기는 외란에 대한 적응 및 안정도, 응답속도 측면에서 장점을 나타내었다. 향후 이 위성 모델 및 제어기를 사용하여 실제 운용시 예상되는 제어기의 결과를 확인할 수 있으며, 더 나아가 새로운 제어기의 개발 및 교육 등에 유용하게 사용될 수 있을 것이다.

• 한국산학기술학회논문지
• /
• 제22권2호
• /
• pp.781-788
• /
• 2021

본 논문은 K56 탄약운반장갑차의 주제어기와 서보제어기간의 통신에서 발생하는 통신오류를 개선하기 위한 설계에 관한 연구이다. K56 탄약운반장갑차는 K-55A1 자주포의 탄약 보급 및 적재를 자동화하여 운용을 보조하기 위한 장비이다. 탄약운반차의 캔통신보드는 주제어기의 내부에 탑재되어 서보제어기와의 통신을 위해 장착되는 핵심적인 기능품이다. 기존의 캔통신보드에서 정의되지 않은 오류가 간헐적으로 발생하는 문제점이 확인되었으며, 이로 인하여 탄적재 과정 중 탄약보급시스템 운용 중단 현상이 발생한 바가 있다. 본 논문은 발생된 문제를 해결하기 위하여 주제어기, 서보제어기간의 통신신호의 분석 및 기능시험을 통하여 고장 원인을 식별하였다. 또한 Read/Write 알고리즘 개선을 통한 재설계를 수행하여 오류 발생 현상을 해소하였다. 마지막으로, 제안된 원인 분석 및 설계의 유효성을 캔통신보드 단품 시험을 통하여 입증하였다. 이 연구가 캔통신보드의 신뢰성 향상을 통한 방위력 증진과 더불어, DPRAM을 이용하는 전자장치 전반의 신뢰성 향상에도 참고자료가 될 것으로 기대한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1016-1021
• /
• 2003

The overall size of electronic product is becoming small according to development of technology. Accordingly it is difficult to inspect these small components by human eyes. So, an automation system for inspecting them has been used. The existing system put microprocessor or Programmable Logic Controller (PLC) use. The structure of microprocessor-based controller and PLC use basically composed of memory devices such as ROM, RAM and I/O ports. Accordingly, the system is not only becomes complicated and enlarged but also higher price. In this paper, we implement FPGA-based One-chip Programmable Timing Controller for Inspecting Small components to resolve above problems and design the high performance controller by using VHDL. With fast development, the FPGA of high capacity that can have memory and PLL have been introduced. By using the high-capacity FPGA, the peripherals of the existent controller, such as memory, I/O ports can be implemented in one FPGA. By doing this, because the complicated system can be simplified, the noise and power dissipation problems can be minimized and it can have the advantage in price. Since the proposed controller is organized to have internal register, counter, and software routines for generating timing signals, users do not have to problem the details about timing signals and need to only send some values about an inspection system through an RS232C port. By selecting theses values appropriate for a given inspection system, desired timing signals can be generated.

• 한국정보전자통신기술학회논문지
• /
• 제7권3호
• /
• pp.117-120
• /
• 2014

수문 제어의 주요기술은 두 개의 실린더가 하나의 수문을 동시에 10[m] 이상 들어 올리는 행정 동안 정밀하게 제어되도록 하여 동기 작동 시키는 것이다. 실린더에 공급되는 유량 및 압력이 일정하지 않으며, 실린더 피스톤의 비선형적인 마찰력에 의해 두 개의 실린더 위치 오차가 발생하게 되면 수문의 개폐 시 비틀림 현상을 야기 시켜서 수문의 마모를 발생시키고, 수문의 개폐작동 불능 현상을 마들기도 한다. 배수갑문용 유압실린더의 위치 및 동기 제어기를 설계하기 위하여 fuzzy PI 제어기를 이용하여 두 개의 실린더의 위치 및 동기 제어기를 설계하고, 시뮬레이션을 통해 효용성을 제시한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2325-2327
• /
• 2003

This thesis is concerned with the control of Arago's disk system using CAN(Controller Area Network). CAN protocol is used widely for the real time control in networked control systems(NCS). A networked control system using CAN is constructed to perform position control of Arago's disk. The mathematical model, of overall system is derived to design an appropriate controller analytical1y. Various operating points of the Arago's disk system in the real time control are chosen as stable region ($45^{\circ}$), marginal1y stable region($90^{\circ}$) and unstable region($120^{\circ}$), and the experiment for the position control of arago's disk system is done for each operating point. The performance of the suggested NCS is verified by experiments. It is shown that the NCS using CAN has stability and excel1ency in real time control.

• Journal of Welding and Joining
• /
• 제16권3호
• /
• pp.129-140
• /
• 1998

An interface system was developed to offer the welding capability to a robot controller which had not any embedded function for arc welding before, and also an arc sensor algorithm was proposed for weld seam tracking of the welding robot. For the interface system between the robot controller and welding equipments, data communication software and interface connections were composed. The interface system was mae to correspond welding condition, correction data, operation sequence and current status with the robot controller by mutual had shaking and digital signal transfer. Graphic user interface program developed under the environment of windows made it easy to monitor data communication and operation status, and to control welding and sensing sequence. Arc sensing algorithm proposed in this study to compensate torch position error was based on a fuzzy logic with the variables of current difference and current differenced change at torch weaving extremities. The developed interface system could be successfully implemented in between welding equipments and the robot controller, and showed normal status and exact function in data and signal communication between the systems. The whole robot welding system was then examined to verify its welding and seam tracking capabilities in horizontal fillet, vertical fillet, and 3-dimensional fillet weldment. The experiments revealed sound weld bead shapes and also good seam tracing results.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1152-1162
• /
• 2016

The unequal impedances of the interconnecting cables between paralleled inverters in the island mode of microgrids cause inaccurate reactive power sharing when the traditional droop control is used. Many studies in the literature adopt low speed communications between the inverters and the central control unit to overcome this problem. However, the losses of this communication link can be very detrimental to the performance of the controller. This paper proposes an improved reactive power-sharing control method. It employs infrequent measurements of the voltage at the point of common coupling (PCC) to estimate the output impedance between the inverters and the PCC and then readjust the voltage droop controller gains accordingly. The controller then reverts to being a traditional droop controller using the newly calculated gains. This increases the immunity of the controller against any losses in the communication links between the central control unit and the inverters. The capability of the proposed control method has been demonstrated by simulation and experimental results using a laboratory scale microgrid.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권1호
• /
• pp.13-18
• /
• 2000

In this paper, an Adaptive Evolutionary Computation(AEC) is proposed. AEC uses a genetic algorithm(GA) and an evolution strategy (ES) in an adaptive manner is order to take merits of two different evolutionary computations: global search capability of GA and local search capability of ES. In the reproduction procedure, proportions of the population by GA and ES are adaptively modulated according to the fitness. AEC is used to design the membership functions and the scaling factors of fuzzy logic controller (FLC). To evaluate the performances of the proposed FLC, we make an experiment on FLC for the speed control of an actual DC series motor system with nonlinear characteristics. Experimental results show that the proposed controller has better performance than that of PD controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1897-1900
• /
• 2004

In recent years, a lot of industrial equipments have serial communication channel such as FieldBus (CAN, Profibus, etc.) or Ethernet that provides real time communication between industrial equipments. Theses applications include gantry crane, robot, chip mounter, etc.. In this paper, we discuss the synchronization technique for networked multi-motor systems where controllers (commercial servo amps) are distributed and interconnected by CAN (Controller Area Networks). We first describe the equivalent model for the individual servo-amp and motor using the frequency response. We design the $H{\infty}$ controller for motion synchronization. Finally, the synchronization technique using the equivalent model and the $H{\infty}$ controller is verified by the simulation and the experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2542-2544
• /
• 2000

In this paper, CAN(Controller Area Network)is used to solve the wire harness problem in the outside mirror of automobile which has a lot of functions in narrow space. If the number of wires is reduced, it has benefits of lower product cost and maintenance. CAN was originally developed by the German company Robert Bosch for use in the car industry to provide a cost-effective communications bus for in car electronics and as alternative to expensive and cumbersome wiring looms. CAN controller is a serial communication protocol which efficiently supports distributed real-time control with a very high level of security. The communication between master CAN controller and slave CAN controller is realized and controller's performance is tested by experiment.