• Transactions on Control, Automation and Systems Engineering
• /
• 제4권3호
• /
• pp.199-204
• /
• 2002

This paper is concerned with H$_{\infty}$ controller design methods for descriptor systems with and without time-varying delays in state and control input. The sufficient condition for the existence of an H$_{\infty}$ controller and the controller design method are presented by linear matrix inequality (LMI), singular value decomposition, Schur complements, and changes of variables. Since the obtained sufficient condition can be changed to an LMI form by proper manipulations, all solutions including controller gain can be obtained at the same time. Moreover, it is shown that robust H$_{\infty}$ controller design problem for parameter uncertain descriptor systems with time-varying delays in state and control input can be solvable using the proposed method.

• 한국정보통신학회논문지
• /
• 제2권4호
• /
• pp.603-610
• /
• 1998

본 논문은 차량의 엔진을 컴퓨터를 이용하여 모델링하고, 이를 본 논문에서 설계한 Fuzzy-PID 제어기로 성능을 평가하는 것으로서, 차량의 정속주행 특성을 Fuzzy-PID제어기를 이용하여 시뮬레이션 한다. 차량의 엔진모델은 MATLAB-Simulink를 이용하여 설계하고, PID의 각 파라메터값은 Fuzzy 제어기를 이용하여 자동 추정하는 형태로 구성한다. 차량의 시뮬레이션은 직선주로상에서 이루어지고, 이를 퍼지 제어기, 그리고 PID 제어기와 비교 분석해 보았다.

• 한국정보통신학회논문지
• /
• 제3권4호
• /
• pp.875-885
• /
• 1999

This paper presents an application of LMI-based techniques to the mixed $H_2/ H_\infty$ control of an inverted pendulum. The linear model of the inverted pendulum represented by an LFR(Linear Fractional Representation) model of uncertainties is derived. Considered uncertainties are three nonlinear components and a parameter uncertainty Augmenting the LFR model by adding weighting functions, we get a generalized plant, for which we design a mixed $H_2/ H_\infty$ controller using the LMI technique. To evaluate control performances and robust stability of the mixed $H_2/ H_\infty$ controller designed, we compare it with the $ H_\infty$controller through the simulation and experiment. The mixed $H_2/ H_\infty$ controller shows the better control performances and robust stability than the $H_\infty$controller in the sense of pendulum angle.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.64-68
• /
• 1997

In this paper, a controller for the linear motor with high speed and stiffness is implemented using SERCOS interface which is a real time communication protocol between the numerical controller(NC) and the motor driver. The proposed controller is mainly composed of current, speed, and position controller, which are designed using the 32-bit DSP(TMS320C31), a high-integrated logic device (EPM7128), and Intelligent Power Module(IPM) to enhance reliability and compactness of the system. The experimental results show the effective performance of the proposed controller for he linear motor with high speed and stiffness.

• 유공압시스템학회논문집
• /
• 제8권2호
• /
• pp.29-35
• /
• 2011

These days the injection molding work and press work are in the trend of needing the precision control of position and pressure in a high speed. On the other hand the digital computer technology is developing rapidly. And recently the digital servo controller using micro controller become to be used more broadly, because of the merit of digital communication. In this study the sequential control of hydraulic system switching from position to pressure and to position is tried using the HACD(Hydraulic Axis Controller Digital for electrohydraulic drives) which is manufactured by BoschRexroth. Through this, the possibility of the precision sequential control using the digital servo controller HACD is examined.

• Journal of information and communication convergence engineering
• /
• 제5권4호
• /
• pp.351-357
• /
• 2007

SRM (Switched Reluctance Motor) has not been put into practical use since it has been developed in mid 19th centuries, but the switching element using semi-conductor was developed in 1950's which made possible to produce small size staffing motors. The research activities have been lively conducted regarding SRM since 1960's, nowadays, more research activities are being carried out focusing on developing small home appliances such as vacuum cleaners and washing machines. This thesis explains the study of controller design applied to SRM concept. This controller executes controller algorithms via $\mu$ - processor to increase stability and precise measurement, and VHDL (Very high speed integrated circuit Hardware Description Language) is designed to generate SRM driving signal.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.406-409
• /
• 1997

An economical 4-axis CNC controller employing step motors is designed and implemented in this paper. By using the inherent ability of holding position of the motor, the CNC controller uses open-loop control for removing trajectory error and for a simple hardware. Each drive of axis has an 8-bit microprocessor 89C52 and a PC controls the axes and pendant by means of RS232C serial communication. Backlash is also compensated at the axis controller. While compensating the backlash, the feed rate becomes zero in order to minimize trajectory error. The trajectories of 16ms interval are computed on PC and are sent to motor drives. In the drives, the trajectories are linearly interpolated for 2ms interval. The developed CNC does not require add-on specific motion card on PC. From the experimental results, the validity of the CNC controller based on step motor is proved.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.108-113
• /
• 1994

Active noise control technique has superior performance in low frequency ranges(50 .approx. 400Hz) to the conventional passive noise control technique. For the feasibility of active noise control, it is required to develop a controller which can implement control algorithm on real-time. In this study, therefore, real-time controller is developed using TMS320c25, high speed digital processor. Unlike conventional DSP board of complete ADD ON type, it is possible for the developed controller to interface with the other computer system easily by series communication for the convenience of program development. Furthermore it is designes to be separated readily as a control device. Active noise control of duct system is implemented ti evaluate a performance of developed device. Active noise control of duct system is implemented to evaluate a performance of developed controller using filtered-x LMS algorithm.

• 제어로봇시스템학회논문지
• /
• 제6권4호
• /
• pp.247-253
• /
• 2000

In this paper, we deal with the full range control problem of nonlinear boiler systems subject to complex actuator constraints. Firstly, $H\infty$ loop shaping design procedure［10］ is used for the controller design. Secondly, modified high-gain feedback［11］ for the loop shaping controller is adopted for the anti-windup function and the bumpless transfer technique between controllers is proposed for the full range control of nonlinear systems. Finally, the performance of the proposed controller is demonstrated through the simulation studies.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.498-501
• /
• 1998

This paper deals with the design and evaluation of the robust controller for a synchronous generator excitation system to improve the steady state and transient stability. The nonlinear characteristics of the system is treated as model uncertainties, and then the robust control techniques are introduced into the power system stability design to take into account these uncertainties at the controller design stage. The performance of the designed controller is examined by extensive non-linear time domain simulation. It is shown that the performance of the robust controller is superior to that of the conventional PI controller.