• Computers and Concrete
• /
• 제19권4호
• /
• pp.365-374
• /
• 2017

With the continuous evolution of the numerical methods and the availability of advanced constitutive models, it became a common practice to use complex physical and geometrical nonlinear numerical analyses to estimate the structural behavior of reinforced concrete elements. Such simulations may yield the complete time history of the structural behavior, from the first moment the load is applied until the total collapse of the structure. However, the evolution of the cracking pattern in geometrical discontinuous zones of reinforced concrete elements and the associated failure modes are relatively complex phenomena and their numerical simulation is considerably challenging. The objective of the present paper is to assess the applicability of the Applied Element Method in simulating the development of distinct failure modes in reinforced concrete walls subjected to monotonic loading obtained in experimental tests. A pushover test was simulated numerically on three distinct RC shear walls, all presenting an opening that guarantee a geometrical discontinuity zone and, consequently, a relatively complex cracking pattern. The presence of different reinforcement solutions in each wall enables the assessment of the reliability of the computational model for distinct failure modes. Comparison with available experimental tests allows concluding on the advantages and the limitations of the Applied Element Method when used to estimate the behavior of reinforced concrete elements subjected to monotonic loading.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.249-252
• /
• 2008

이 논문에서는 비부착 CFRP 판으로 긴장된 RC(Reinforced Concrete) 보의 비선형 해석방법을 제시하였다. 하중 재하 시 부재의 단면 내에서 변화하는 재료상태를 정확히 예측하기 위해 철근콘크리트 뼈대는 콘크리트와 보강철근 화이버로 구성된 화이버모델요소로 이상화하였다. 또한 CFRP 판의 비부착 거동을 모사하기 위해 CFRP 판을 뼈대요소의 각 절점에 연결되는 여러 개의 요소로 이상화하되, 연결부에서 슬립이 가능한 것으로 가정하여 슬립으로 인한 CFRP 판의 인장력을 반복적으로 보정함으로써 CFRP 판요소들의 응력이 같도록 하였다. 이 논문에서 제시한 해석방법의 정당성을 검토하기 위해 비부착 CFRP 판으로 긴장된 RC 보의 극한해석을 수행하여 해석결과를 타 연구자의 실험결과와 비교해 본 결과, 두 연구결과가 잘 일치함을 확인하였다.

• 한국전산구조공학회논문집
• /
• 제26권4호
• /
• pp.275-281
• /
• 2013

본 논문에서는 유전알고리즘을 사용하여 철근콘크리트 구조물의 최적 지진설계를 효율적으로 수행하기 위해 클러스터를 사용하는 경우 확장성을 확인하였다. 클러스터를 구성하는 코어프로세서의 개수를 증가시키면서 유전알고리즘의 각 세대에 소요되는 시간의 감소를 관찰하였다. 단일 퍼스널 컴퓨터의 구성을 분류한 후, wall-clock time과 암달의 법칙으로 예상된 값을 비교하여 예상되었던 병목현상을 확인하였다. 이에 클러스터의 확장성에서 복합적인 요인에 의한 경향을 확인할 수 있었다. 병목현상의 물리적인 요인과 알고리즘 측면에서의 요인을 구분하기 위해 유전알고리즘의 개채수를 나누어 실험을 수행하여 결과를 확인하였다.

• 대한가정학회지
• /
• 제42권6호
• /
• pp.1-12
• /
• 2004

This study investigates residents' living satisfaction with high-rise, mixed-use apartments built in the structures of reinforced concrete construction(RC) and with steel framed, reinforced concrete construction(SRC). The following study results were obtained: 1) Residents expressed below average satisfaction (below 3.0) with the common-area landscape and environmentally-friendly factors, children's playground and its facilities, community service for residents' by the management offices and utility plan. 2) According to the satisfaction of sound environment, residents of the SRC group expressed above average satisfaction. It can be concluded that noise problems around the residential area of the SRC group was well solved in this study. However, the residents of the SRC group expressed low satisfaction with the freshness of indoor air, humidity, and smell in the living quarters. 3) High-rise, mixed-use apartments should accommodate a familial life cycle, be designed as an environmentally friendly resting place in harmony with city life, and provide various communal programs for residents.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.305-308
• /
• 2004

There are ground facility of maintenance in house electric facility of infra maintenance electric home appliances having used multifariousness in house, that use electric energy of common source for equipment. The body of building such as the reinforced concrete construction is structurally united, and the electric resistance is also small. It is possible that those foundations have contacted the ground at large surface area and that it substitutes the building construction body for the earth electrode. This is called "the structure earthing". This method has been defined at electrical facilities technical standards and KS in our country, and it has been used in various quarters practically. However, in our country, there is no example of using the foundation of the house as substitution earth electrode practically, and the means of the evaluation as electrode has not been established either. Then, in this paper, basic research for utilizing foundation of the house as substitution earth electrode is carried out.

• Earthquakes and Structures
• /
• 제10권4호
• /
• pp.965-988
• /
• 2016

This paper investigates the seismic behavior of reinforced concrete shear wall buildings with multiple underground stories. A base-case where the buildings are modeled with a fixed condition at ground level is adopted, and then the number of basements is incrementally increased to evaluate changes in performance. Two subsurface site conditions, corresponding to very dense sands and medium dense sands, are used for the analysis. In addition, three ground shaking levels are used in the study. Results of the study indicated that while the common design practice of cropping the structure at the ground surface leads to conservative estimation of the base shear for taller and less rigid structures; it results in unpredicted and nonconservative trends for shorter and stiffer structures.

• Earthquakes and Structures
• /
• 제6권1호
• /
• pp.45-69
• /
• 2014

The 2009 L'Aquila, Italy earthquake shook a high density area causing a wide spectrum of damage to reinforced concrete with infill buildings, one of the most common building types used in Italy. The earthquake has proven to be a "full-scale" laboratory to further understand building performance. This paper presents the first results of a joint research effort between the University of Bologna and Degenkolb Engineers, aimed at investigating the seismic behavior of an infilled frame building that collapsed during the earthquake. State-of-the-practice techniques were implemented as a way to determine the reliability of these modeling techniques in anticipating the observed building performance. The main results indicate that: (i) the state-of-the-practice techniques are able to predict the observed behavior of the buildings; (ii) the masonry infills have a great influence on the behavior of the building in terms of stiffness, strength and global ductility.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2003년도 정기총회 및 추계학술대회
• /
• pp.145-149
• /
• 2003

This study is to investigate residents' living satisfaction with high-rise mixed-use apartment complexes built in the structures of the reinforced concrete constructing and the steel framed reinforced concrete construction. The results of this study were obtained as follows: 1. Residents expressed below average satisfaction (below 3.0) with the common-area landscape and environmentally-friendly factors, children's playground and its facilities, community service for residents' by the management offices and the plan of utility. 2.According to the satisfaction of sound environment, residents of SRC group expressed above average satisfaction; it can be concluded that problems of causing noise around the residential area of the SRC and S groups were well solved in this study. However, satisfaction with the freshness of indoor air, humidity, and smell in the living quarters was rated low by the residents of SRC group. 3. High-rise mixed-use apartment complexes should accomodate families's life cycle, design an environmentally-friendly resting place in harmony with city life, and provide various communal programs for residents.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.361-364
• /
• 2008

This paper deals with assessment of electrical safety for grounding system of buildings by investigation on the spot at construction site. The investigation was carried out for grounding method, grounding type, shape of grounding electrode, grounding for lightning protection system, continuity of steelwork in reinforced concrete structure and so on. The investigation on the spot was performed by researcher, engineer with over fifteen years of industry experience all over the country. As a result of investigation on the spot to 13 buildings, common grounding method was dominant. A new grounding system based on international standards includes unity grounding system, structure grounding utilizing steel reinforced concrete, equipotential bonding. use of surge protective device.

• Earthquakes and Structures
• /
• 제4권5호
• /
• pp.527-555
• /
• 2013

This paper proposes probabilistic models for estimating the seismic demands on reinforced concrete (RC) bridges with base isolation. The models consider the shear and deformation demands on the bridge columns and the deformation demand on the isolation devices. An experimental design is used to generate a population of bridges based on the AASHTO LRFD Bridge Design Specifications (AASHTO 2007) and the Caltrans' Seismic Design Criteria (Caltrans 1999). Ground motion records are used for time history analysis of each bridge to develop probabilistic models that are practical and are able to account for the uncertainties and biases in the current, common deterministic model. As application of the developed probabilistic models, a simple method is provided to determine the fragility of bridges. This work facilitates the reliability-based design for this type of bridges and contributes to the transition from limit state design to performance-based design.