• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.638-642
• /
• 2005

For gas hydrate exploration, long offset multichannel seismic data acquired using by the 4km streamer length in Ulleung basin of the East Sea. The dataset was processed to define the BSRs (Bottom Simulating Reflectors) and to estimate the amount of gas hydrates. Confirmation of the presence of Bottom Simulating reflectors (BSR) and investigation of its physical properties from seismic section are important for gas hydrate detection. Specially, faster interval velocity overlying slower interval velocity indicates the likely presences of gas hydrate above BSR and free gas underneath BSR. In consequence, estimation of correct interval velocities and analysis of their spatial variations are critical processes for gas hydrate detection using seismic reflection data. Using Dix's equation, Root Mean Square (RMS) velocities can be converted into interval velocities. However, it is not a proper way to investigate interval velocities above and below BSR considering the fact that RMS velocities have poor resolution and correctness and the assumption that interval velocities increase along the depth. Therefore, we incorporated Migration Velocity Analysis (MVA) software produced by Landmark CO. to estimate correct interval velocities in detail. MVA is a process to yield velocities of sediments between layers using Common Mid Point (CMP) gathered seismic data. The CMP gathered data for MVA should be produced after basic processing steps to enhance the signal to noise ratio of the first reflections. Prestack depth migrated section is produced using interval velocities and interval velocities are key parameters governing qualities of prestack depth migration section. Correctness of interval velocities can be examined by the presence of Residual Move Out (RMO) on CMP gathered data. If there is no RMO, peaks of primary reflection events are flat in horizontal direction for all offsets of Common Reflection Point (CRP) gathers and it proves that prestack depth migration is done with correct velocity field. Used method in this study, Tomographic inversion needs two initial input data. One is the dataset obtained from the results of preprocessing by removing multiples and noise and stacked partially. The other is the depth domain velocity model build by smoothing and editing the interval velocity converted from RMS velocity. After the three times iteration of tomography inversion, Optimum interval velocity field can be fixed. The conclusion of this study as follow, the final Interval velocity around the BSR decreased to 1400 m/s from 2500 m/s abruptly. BSR is showed about 200m depth under the seabottom

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.1
• /
• pp.113-123
• /
• 2011

The purposes of this study were to re-interpret the Traditional Korean Painting of Flower and Bird Patterns from a modern point of view and use them in apparel textile design. A literature review of the Traditional Korean Painting of Flower and Bird Patterns was made first, and then, through manual and Photoshop workings, two apparel textile designs were suggested. The results were as follows. First, Traditional Korean Paintings of Birds and Flowers are covered not only by decorative beauty but also by the common pure hope and ideology of loving and adoring nature, which is inherent in the symbolism and racial characteristics and high aesthetic sense appeared by ancestors' life feeling. The meaning that is symbolized by each subject matter appearing in the Transcontinental Painting of Bird and Flower is important, but the ancestors' deeper and affectionate desire is shown in the harmony and happy aspect of a picture where more than two subject matters appear, such as Song Hak do where pine is with crane, cockscomb with chicken, bamboo with beacon fire, or a couple of them with flower. Second, two kinds of textile designs were suggested. The motif of work 1 targeted professional women of activity and individuality in their late 30s to early 40s. The lotus blossom pattern was selected to present its concept, "Chic Elegance." The motif of work 2 targeted intelligent women in their mid 40s, and the peony blossom was selected to present its concept, "Romantic Elegance."

• The Journal of Engineering Geology
• /
• v.7 no.3
• /
• pp.161-171
• /
• 1997

The exact information on geological structures and characteristics of the subsurface must be acquired to secure quality and safety of constructions. GPR technique, one of the most updated geophysical methods, is known for its applicability to shallow-depth underground surveys. The purpose of this study is to examine the usefulness of GPR method in constructions for detailed subsurface investigations, especially detecting the boundary between basement rock and its overburden. To find appropriate depths of the geological boundaries, it is necessary to obtain velocity of electromagnetic wave propagating into the ground. Wave velocity 0.096 m/ns estimated from velocity analysis using CMP gathers is used for depth conversion from time section. The depths of geological boundaries from GPR profiles are very well correlated with boring data. In addition, GPR survey has found some undulations of the geological boundaries due to weathering, which cannot be provided by conventional coring approaches.

• Parasites, Hosts and Diseases
• /
• v.55 no.5
• /
• pp.575-578
• /
• 2017

Aspidogastrid trematodes (Subclass Aspidogastrea) are a relatively small group with a characteristic adhesive disc and parasitize in a variety of cold-blooded hosts. Until now, only 2 species in the genus Cotylaspis, i.e., C. coreensis and C. sinensis, have been reported as the aspidogastrid trematode in the Republic of Korea (=Korea). In the present study, we intended to describe a species of aspidogastrids collected from the small intestine of the common carp, Cyprinus carpio, in a faunistic point of view. Total 51 specimens were collected from a carp caught in Nakdong-gang (River) on May 2015. Some of them were prepared as the specimens for light microscopic observations, and some others were prepared for SEM. They were slightly elongated without head lobes, $2,432{\times}840{\mu}m$ in average size, and had characteristic adhesive discs with 4 rows and 46 alveoli in average. The ovary was reniform and was located in the posterior-upper part of the body. The single testis was larger than the ovary and was located below the ovary. The uterus was coiled containing numerous eggs and distributed in the posterior 2/3 of the body. The vitellaria were follicular, and distributed from the mid-level of testis to near the posterior end. The morphological characters with dimensions of our specimens were closely identical with those of Aspidogaster ijimai previously described. A new aspidogastrid is added among the Korean trematode fauna by the present study.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.4
• /
• pp.581-586
• /
• 2018

A common characteristic of many patients whose illness is getting worse is that they miss the treatment red flag. When high subjective symptoms appear or there is no strong pain, this problem arises because it is reluctant to visit the hospital. Gingivitis causes bleeding from the gums in the early and mid-term, and shows mild symptoms of tooth collapse. When treatment is done at this point, it shows a very high effect. However, when you miss the timing of treatment you will have a situation where you can't eat food by causing serious problems in the health of the gums and oral cavity. In this paper, the patient's periodontal image is photographed with a smartphone and transmitted in real time. This is done by the doctor in charge. Then, we propose a design of a patient management system that provides information on the current situation to the patient so as not to miss the timing of treatment.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.11
• /
• pp.89-100
• /
• 2019

In modern Korean architecture, some of school buildings have been referred to as Tudor Gothic style by its design elements. But, to be more exact in detail, they have to be interpreted as a Collegiate Gothic style that has occurred in the United States since the mid-19th century. Therefore, this study explains the progress of Collegiate Gothic style in the United States through the literature published since the 19th century, and examines the adoptation process of Korea. In addition, this thesis analyzes the characteristics of American Collegiate Gothic style and the elements of Collegiate Gothic style universally adopted in Korea, and then attempts a new interpretation on the representative Collegiate Gothic architecture in Korea. The results of this research are as follows. The Collegiate Gothic style in the United States caused by the change of educational environment in the 19th century was accepted for religious purposes by foreign architects such as Henry K. Murphy and W. Vories, and was also accepted by domestic architects who were directly influenced by Western architecture such as Park, Dong-jin. In addition, the accepted Collegiate Gothic style shows common features not only in the decoration of Tudor Gothic but also in the material and compositional aspects such as the quadrangle plans and the rock-faced exterior facades. From the point of view of the Collegiate Gothic style then in vogue at many schools and universities, further researches will be needed to interpret modern school architectures in Korea.

• Journal of the Korean Society of Costume
• /
• v.63 no.2
• /
• pp.29-44
• /
• 2013

This study is about the periodic characteristics of Wonsam in the Joseon Dynasty. Wonsam include the Danryeong-shaped Wonsam in the beginning, the compound Wonsam in a period of transition and the stereotyped Wonsam in the late Joseon Dynasty. The formative characteristics of Wonsam are divided into four stages. The first stage of the Wonsam is from the 15th to 16th century. The shape of Wonsam began to form and it was similar to one of Danryeong during this time. The formative characteristics of the first Wonsam included collars that looked like one of Danryeong, side pleats(called Moo) with multiple inner folds, straight cylinder-shaped sleeves, and a belt tied with the Wonsam. There were various fabrics that were used for the Wonsam from this stage. Second stage of the Wonsam is from the early 17th to mid 17th century. This period marked the beginning of the transition of the Wonsam and it served as a stepping-stone to the development stage in the Joseon Dynasty. The characteristics of the transitional Wonsam were a complex combination of the Danryeong and Wonsam. During this period, the Wonsam went through many changes and forms in a short period of time. Third stage of the Wonsam is from the mid 17th to early 19th century. The Wonsam was developed at this stage. The developed Wonsam went through a period of transition equipped with a stable form. The formative characteristics of Wonsam during this period included collars that faced each other, big and wide sleeves with multicolored stripes, Hansam, curve-edged side seam and the side pleats(Moo) with multiple inner folds had disappeared. It was a turning point from the single-layered clothes to double layered clothes and from dark blue to green color appeared at this time. The fabric patterns of this stage tended to consist of more simplified silk pattern. The fourth stage of the Wonsam is from the late 19th to 20th century. The Wonsam was expanded at this stage. The formative characteristics and fabrics were typically used for the standard Wonsam and were divided into two types; as a ceremonial robe used in courts and a wedding ceremonial robe for the common people. Phenomena such as sewing of double-layered clothes as one and straight-edged side seam during the late Joseon period developed into simpler and more practical fashion culture.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.1
• /
• pp.31-52
• /
• 1998

In this paper, we analyzed the relationships between the fishing ground formation and the sea condition information, surface, mid and bottom layer temperature that is necessary for fishing point selection of angling to catch squid in the East Sea. There was a little differences between temperature measured by every fishing boat on fishing operating and prompt reports of fishing and sea condition about fishing ground formation of angling. And then the result examined by using SST that is a important information of sea condition for the fishing position selection follows as ; We knew, even if the differencs of sea condition each year, SST with a lot of fishing boats was generally within the extnet of $2^{\circ}C$. But the result examined by the limit time about the temperature of mid and bottom layer for the groups of fishing boats not to measure and for the near sea measurement to be done only within EEZ waters follows as ; About the temperature of 50m layer on early in June and July in operating waters of the group of fishing boats, the fishing ground was formed from $10^{\circ}C$ to $12^{\circ}C$ between warm waters and cold waters, afterwards we can seize that the fishing ground was moving to waters from $5^{\circ}C$ to $8^{\circ}C$ at near of polar front. In the coastal waters, we knew that fishing ground is formed to waters from $10^{\circ}C$ to $12^{\circ}C$ at the southern of polar front about the temperature of 50m layer.

• The Journal of Engineering Geology
• /
• v.23 no.3
• /
• pp.201-216
• /
• 2013

Ground penetrating radar (GPR) surveys were conducted in a sand tank model in a laboratory and at an alluvial field site to detect the groundwater table and to investigate the influence of saturation on GPR response in the unsaturated zone. In the sand tank model, the groundwater table and saturation in the sand layer were altered by injecting water, which was then drained by a valve inserted into the bottom of the tank. GPR vertical reflection profile (VRP) data were obtained in the sand tank model for rising and lowering of the groundwater table to estimate the groundwater table and saturation. Results of the lab-scale model provide information on the sensitivity of GPR signals to changes in the water content and in the groundwater table. GPR wave velocities in the vadose zone are controlled mainly by variations in water content (increased travel time is interpreted as an increase in saturation). At the field site, VRP data were collected to a depth of 220 m to estimate the groundwater table at an alluvial site near the Nakdong river at Iryong-ri, Haman-gun, South Korea. Results of the field survey indicate that under saturated conditions, the first reflector of the GPR is indicative of the capillary fringe and not the actual groundwater table. To measure the groundwater table more accurately, we performed a GPR survey using the common mid-point (CMP) method in the vicinity of well-3, and sunk a well to check the groundwater table. The resultant CMP data revealed reflective events from the capillary fringe and groundwater table showing hyperbolic patterns. The normal moveout correction was applied to evaluate the velocity of the GPR, which improved the accuracy of saturation and groundwater table information at depth. The GPR results show that the saturation information, including the groundwater table, is useful in assessing the hydrogeologic properties of the vadose zone in the field.

• Journal of Technologic Dentistry
• /
• v.32 no.4
• /
• pp.417-433
• /
• 2010

Purpose: This study evaluated the manpower planning of dental technicians. Methods: Methods : Survey was conducted regarding subject's general characteristics, characteristics of dental technician's occupational view and working conditions, and reason to enter into branches of the public health enter. The survey sample consisted of 323 dental technicians (221 male/ 102 female). Survey was conducted for one month from August 1 to September 1 in 2010. Following results were obtained. Results: 1. Regarding general characteristics of the subjects, there was a slight male predilection with 68.4%. Subjects in their 40s occupied the highest proportion of 32.2%. Majority of subjects worked in the big cities (71.5%). Favored working places were dental laboratory (57.6%) and dental hospital or dental clinic (19.5%). Although no position is available in the public sector such as public health center or health care civil servant, 9.3% preferred working in the public health center. Public sector is more favored than 2-year technical colleges or dental supply and equipment companies. In respect to education, 57% of the subjects graduated college. 67.8% were married. Subjects who specialize in the porcelain or all-ceramic were 57.9%. With regard to current position, head of the dental laboratory was most common. 2. Following occupation characteristics were found. Economic reason took the highest proportion when deciding their occupation (39.9%) followed by gaining social experience (36.5%). Majority of the subjects (76.5%) wanted to work as dental technicians until their retirement. 71.5% pursuit to become a manager of the dental laboratory. 76.1% agreed on opening a dental technician position in the public health center. Regarding an authority to lead developing the dental technician position in the public sector, majority of the subject chose ministry of health and welfare (35.6%) and Korean dental technologist association (34.7%). Employment (average, 30%) and turnover rate (average, 36.5%) of dental technology college graduates ranged from 40% to 60%. Most important factors for the employment were practical experience (41.2%) and competency (34.4%). With regard to job satisfaction, so-so as 46.7% and satisfactory was 42.7% 3. In respect to the reason for opening a position in the public health center, 'It is needed to continue denture rogram for elderly patients' obtained the highest score (4.14 point). 'Institutional devices are required to open a position for dental technicians as a public healthcare provider' received high score (4.11 point). 4. Concerning the working conditions, 'professional knowledge is required' received the highest score (4.23) followed by 'too short maternity and parental leave' (4.21). 5. Relationship between general characteristics of the subjects and favor of working in the public health center was investigated. Significant differences were found according to the current and favored working area, favored occupation, education level, marital status, and specialty. Working in the public health center was favored by following subjects: working in mid- or small-sized cities (4.16 point, p<0.05); PhD degree-holder (4.59 point, p<0.01). 6. Among general characteristics of the subjects, significant difference of working conditions was found in the following factors: gender; working areas; favored working areas; favored working positions, and education level. Majority of subjects favored working in big cities and currently work in big cities although satisfaction was comparatively low (3.75 score). 7. Future plan to work in public health center was evaluated according to occupational characteristics. Subject's intention to work in the public healthcare center was significantly affected by opening of dental technician position, leading authority, average turnover rate, and factors affecting employment. Working in the public health care center was favored by the following subjects: Dental technicians who actively supported opening of the dental technician position (4.34 point, p<0.001); subjects who thought the Korean dental technologist association is responsible for the opening of positions in the public sector (4.26 point, p<0.001); and subjects who thought that attitude and character are important for the employment (p<0.001). 8. Concerning difference of working conditions according to the occupational characteristics, significant difference was demonstrated by factors such as a reason to choose to be a dental technician, work plan, pursuing position, responsible authority, average employment rate, and job satisfaction. High standard of working conditions was required in subjects who selected to be a dental technician for the leisure time after work (s.05 point, p<0.01), who planted to work until their marriage (4.25 point, p<0.001), and who pursuit to be a manager (3.98, p<0.05). 9. In respect to influence of general characteristics on the advancement to public health centers, the coefficient of determination (R2) was 0.068 and age affected the working condition with significant difference according to the pvalue. 10. Regarding influence of general characteristics on the advancement to public health centers, the coefficient of determination (R2) was 0.335 and work plan, opening of dental technician position in the public sector, and responsible authority had significant influence over the subject's intention to work in the public health center according to the p-value. 11. With regard to the influence of general characteristics on the advancement to public health centers, the coefficient of determination (R2) was 0.091 and reason to choose to be a dental technician, work plan, and responsible authority significantly affected subject's working conditions. Conclusion: Korean society is becoming a super-aged society according to several statistics. As aged population is rapidly increasing, national health insurance plans to cover denture for senior citizen over 75 years old from 2012. Therefore, dental technicians are urgently needed in the public health centers all over the nation. Many subjects in this study planed to work until their retirement and recognized dental technician's expertise. Ministry of health and welfare and Korean dental technologist association should co-operate each other to prepare foundation and institutional devices for dental technicians to advance into the public health center. This will improve oral health of the population. This study showed urgency of medical facilities and services which meets increasing number of aged population and welfare of the population.