• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.327-330
• /
• 2011

CFD simulation is widely used in various industries, universities and research centers. In Korea most of the researchers use foreign commercial S/W packages especially in industries. But commercial CFD packages have some problems as limit to source code and very high license foe. So from several years ago open source CFD code has been widely spread as an alternative. But in Korea there are a few users of open source code. Insufficiency of performance validation as for accuracy, robustness, convenience and parallel speed-up is important obstacles of open source code. So we tested some validation cases as to incompressible external aerodynamics and internal flaws and now are doing compressible flaws. As the first stage of compressible flow validation, we simulated Korea next generation high speed train(HEMU). It's running condition is 400km/hr and maximum Mach number reaches up to 0.4. With the high speed train we tested accuracy, robustness and parallel performance of open source CFD code OpenFOAM Because there isn't experimental data we compared results with widely used commercial code. When use $1^{st}$ order upwind scheme aerodynamic forces are very similar to commercial code. But using $2^{nd}$ order upwind scheme there was some discrepancy. The reason of the difference is not clear yet. Mesh manipulation, domain decomposition, post-processing and robustness are satisfactory. Paralle lperformance is similar to commercial code.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.89-96
• /
• 2018

The purpose of this study is to categorize Commercial area by identifying characteristics of blocks and coding them in order to segment use zoning in Commercial area. The study was conducted as follows. Data from building register, cadastral map, statistics annual report are utilized to identify the physical environment of the block. four types used as code under the physical environment classification code which are classification code of physical environment, detail usage, volume ratio, and height type are set, and combine the classification codes sorted by the four types of code. Through the physical environment classification codes, there are currently 37 different block characteristics of the Old downtown Commercial area. Diversity is not reflected. There are only Central commercial area of regulations in Old downtown commercial areas that are uniformly managed. For the renewal, management and development that can occur in the near future, it is necessary to segment of use district in the commercial area. Consider the current situation and future development direction for the management of sustainable commercial areas. Management is required using physical environment classification codes. It is meaningful that it can be maintained, managed and developed in accordance with the characteristics of each block.

• Journal of Digital Convergence
• /
• v.20 no.5
• /
• pp.99-105
• /
• 2022

In China, with the rise of third-party payments such as WeChat Pay and Alipay, the traditional business of banks has been greatly affected. Banks can encourage and expand QR code payments to merchants. Therefore, it is meaningful to analyze and study the QR code work of banks. The purpose of this study is to analyze the effect of the execution of the zero-rate of the comprehensive payment QR code combined with the payment cycle and Funds Transfer Pricing (FTP) on commercial banks in China. Based on the manually collected customer data of Chinese commercial banks, this paper conducts a case analysis combined with the calculation method of financial indicators. As a result of the study, it was found that commercial banks need to continue to implement the policy as the advantages of introducing the integrated QR code fee rate 0 policy are greater than the disadvantages. This paper provides feasible suggestions on how to quickly occupy the offline payment market for commercial banks, which has guiding significance for commercial banks' marketing decisions. Presently, there are few studies on the zero-rate subsidy policy implemented by Chinese commercial banks.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.77
• /
• pp.145-168
• /
• 2018

The purpose of this paper is to introduce the limitation of liabilities of multimodal transport operators(MTO) in Korea. Also, this paper reviews the revised draft of Korean Commercial Code in 2015. This paper analyzes Korean multimodal transport systemand the limitation of liabilities of MTO by analyzing articles, regulations and practices of Korean Commercial Code and it's the draft in 2015. The paper, also, studies multimodal transport rules by comparing specifically international treaty, rules, or practices. In Korea, Article 816 of Commercial Code treats multimodal transportation adopting the network liability regime. The Article describes only the case of the multimodal transportation where the maritime carriage is engaged. Korea proposed the draft of multimodal transport regulation of Commercial Code in 2015 because present law could not apply for the multimodal transportation involved in the air or land carriage. This paper support the draft of Korean Commercial Code in 2015 because it is necessary to make a predictable legal system of multimodal transport and the limitation of liability reflecting practices or customs.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.2
• /
• pp.111-119
• /
• 2017

We assessed the sanitary quality of fish jerky based on domestic standards (Korean FDA, Standards on Quality of Seafood and Seafood Products, KS) and compared the characteristics of fish jerky with those of other commercial animal jerky products. The standards encompassed sensory properties (form, flavor, color, texture, and foreign matter), moisture, and microbial properties (Escherichia coli and Staphylococcus aureus). Based on the standards, some fish jerkies did not meet standards on sensory form (code 5) and color (code 11), moisture content (code 7 and 12), E. coli (code 2, 4, 5, 9, 10 and 14) and S. Aureus (code 5). These results suggest that commercial fish jerky should be monitored and controlled on safety to ensure the distribution of high-quality products.

• The Korean Journal of Air & Space Law and Policy
• /
• v.27 no.1
• /
• pp.75-101
• /
• 2012

As the Reublic of Korea revised the Commercial Code including 40 articles of air transport enacted newly on May 23, 2011, so Korea became first legislative examples in the Commercial Code of the developed and developing countries. I would like to explain briefly the main contents of my paper such as (1) history of enacting newly Part VI (air transport) in the Korea's revised commercial law, (2) legal background enacting newly Part VI (air transport) in the Korea's revised commercial law and the problems on the conditions of air transport, (3) every countries' legislative examples on the civil liability of aircraft's operator, (4) unlawful Interference Convention and general risk convention of 2009, (5) main contents and prospects of the revised Commercial Code for the liability of aircraft's operator etc as the followings. Meanwhile as the Aviation Act, Commercial Code and Civil Code in Korea and Japan did not regulated at all the legal basis of solution on the disputes between victims and offender for the amount of compensation for damage due to personal or property damage caused by aircraft accidents in Korea and Japan, so it has been raised many legal problems such as protection of victims, standard of decision in trial in the event of aircraft accident's lawsuit case. But the Korean Revised Commercial Code including Part VI, air transport regulations was passed by the majority resolution of the Korean National Assembly on April 29, 2011 and then the South Korean government proclaimed it on May 23 same year. The Revised Commercial Code enforced into tothe territory of the South Korea from November 24, 2011 after six month of the proclaimed date by the Korean Government. Thus, though Korean Commercial Code regulated concretely and respectively the legal relations on the liability of compensation for damage in the contract of transport by land in it's Part II (commercial activities) and in the contract of transport by sea in its Part V (marine commerce), but the Amended Commercial Act regulated newly 40 articles in it's Part VI (air transport) relating to the air carrier's contract liability on the compensation for damage caused by aircraft accidents in the air passengers and goods transport and aircraft operator's tort liability on compensation for damage caused by the sudden falling or collision of aircraft to third parties on the surface and so it was equipped with reasonable and unified system among the transport by land, marine and air. The ICAO adopted two new air law conventions setting out international compensation and liability rules for damage caused by aircraft to third parties at a diplomatic conference hosted by it from April 20 to May 2, 2009. The fight against the effects of terrorism and the improvement of the status of victims in the event of damage to third parties that may result either from acts of unlawful interference involving aircraft or caused by ordinary operation of aircraft, forms the cornerstone of the two conventions. One legal instrument adopted by the Conference is "the Convention on Compensation for Damage to Third Parties, Resulting from Acts of Unlawful Interference Involving Aircraft" (Unlawful Interference Convention). The other instrument, "the Convention on Compensation for Damage Caused by Aircraft to Third Parties" (General Risk Convention), modernizes the current legal framework provided for under the 1952 Rome Convention and related Protocol of 1978. It is desirable for us to ratify quickly the abovementioned two conventions such as Unlawful Interference Convention and General Risk Convention in order to settle reasonably and justly as well as the protection of the South Korean peoples.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.557-561
• /
• 1997

In this study, using DEFORM and PAM-STAMP drawbead analysis is carried out for the commercial code availability. The three drawbead types, single circular drawbead, single square drawbead and double circular drawbead, are examined. The clamping force, drawing force and effective strain of sheet metal which is passed by drawbead are checked on each drawbeads.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.43
• /
• pp.201-238
• /
• 2009

The purpose of this paper is to describe the contents and issues of the draft legislation of Part VI the Carriage by Air of Korean Commercial Code in respect of the domestic carriage of cargo by air, comparing to the related provisions of the Montreal Convention of 1999 for the unification of certain rules for international carriage by air and the related provisions of Korean Commercial Code in respect of the carriage by land and sea. The Montreal Convention in respect of the international carriage by air was adopted in 1999, and Korea has ratified the Montreal Convention in 2007. However, there is now no national legislation in respect of the carriage by air in Korea. Thus, the Ministry of Justice has prepared the draft legislation of Part VI the Carriage by Air of the Korean Commercial Code in July 2008, and the draft legislation is now being reviewed by the National Assembly. The draft provisions of Part VI the Carriage by Air are basically adopting most of the related provisions of the Montreal Convention in respect of the carriage of cargo by air and some draft provisions are applying the related provisions of the Korean Commercial Code in respect of the carriage of cargo by land and sea. In respect of the carriage of cargo by air, the contents of the draft legislation of Part VI the Carriage by Air are composed of the provisions in respect of the liability of the carrier, the rights of the consignor and consignee, the transport document and others. In respect of the carriage of cargo by air, the issues on the draft legislation of Part VI the Carriage by Air are the problems with respect to the extinguishment of the liability of the carrier, the application for the non-contractual claim, the liability limit of the servants or agents of the carrier, the right of disposition of cargo, the effect of breach of the provision in respect of the air transport document, the prescription of claim of the carrier, the immunity reasons from liability of the carrier for the loss or damage of the cargo, the making out of the air waybill, and the effect of the statement of the air transport document. In conclusion, the national legislation of Part VI the Carriage by Air of the Korean Commercial Code will protect the right and interest of the consignor and consignee, and clarify the right and duty of the parties to the air transport. Also it will contribute to the development of the air transport industry in Korea.

• The KSFM Journal of Fluid Machinery
• /
• v.4 no.1 s.10
• /
• pp.38-45
• /
• 2001

A commercial CFD code is used to compute the 3-D viscous flow field within the impeller of a centrifugal pump. Several preliminary numerical calculations are carried out to determine the influence of the parameters such as the grid systems, the numerical schemes, the turbulence models and the shape of the vaneless diffusers at the design flow rate. The results of the preliminary study are used for the calculation of the off-design flow conditions. The circumferentially averaged results such as the radial and tangential velocities, the exit flow angle, the slip factor, the static pressure and the total pressure are compared with the experimental data at the impeller exit to discuss the influence of the prescribed parameters.

• The KSFM Journal of Fluid Machinery
• /
• v.5 no.3 s.16
• /
• pp.54-59
• /
• 2002

A commercial CFD code is used to compute the 3-D viscous flow field within the inlet flow concentrator of the newly developed AHU (Air Handling Unit). To improve the performance of the AHU, the inlet air needs to be gradually accelerated to the fan's annular velocity without causing turbulence or flow separation. Three major geometric parameters were selected to specify the inlet shape of the AHU. The performance of the AHU could be measured by the inlet and outlet flow uniformity and the total pressure loss through the inlet flow concentrator. Several numerical calculations were carried out to determine the influence of the geometric parameters on the performance of the AHU. The best geometric values were decided to have efficient inlet shape with analyzing CFD calculation results.